|
|
| 40MM NYLON CASTOR |
Product Code: 65466 10mm diameter swivel plug fixing. Internal use only on furniture etc. Sold in polybag with label....
|
| 40MM WIRE CUP BRUSH |
Product Code: 41431 These wire cup brushes are designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The bristles are made from hardened dipped brassed steel wire, which gives a high level of durability and resistance t...
|
| 41MM 1" SQUARE DRIVE ELORA BI-HEX SOCKET |
Product Code: 67484 Professional Quality, manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driving accessory with locking pin. Sold loose.Manufactured to...
|
| 41MM 3/4" SQUARE DRIVE ELORA BI-HEXAGON SOCKET |
Product Code: 00822 Professional Quality, sockets manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driving accessory with locking pin. Some socket sizes ...
|
| 41MM ELORA LONG COMBINATION SPANNER |
Product Code: 03727 Professional Quality, forged from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Bi-hexagon ring and jaw offset at 15°. Sold loose.Manufactured to DIN 3113 Form B/ISO 3318 Specifications...
|
| 41MM HEAVY DUTY COMBINATION SPANNER |
Product Code: 36957 Heavy duty long pattern, fully drop forged chrome vanadium steel hardened, tempered and chrome plated. Polished ring end offset at 15°. Jaw offset at 15°. Sold loose in polybags with barcode label.Generally in accordance with DIN3113 Specif...
|
| 41MM RING SLOGGING WRENCH |
Product Code: 31422 Flat pattern spanners with striking end. Forged from good quality carbon steel, hardened, tempered with black phosphate finish. Length +/- 5mm. Sold loose.Based on DIN7444 Specifications...
|
| 41MM SINGLE OPEN END SPANNER |
Product Code: 37537 Forged from chrome vanadium steel with head angle set at 15°. Raised collar around jaw. Hardened, tempered and black phosphate finish. Especially suitable for use in areas where chemicals and chrome plate can give off poisonous fumes....
|
| 41MM X 46MM ELORA DEEP CRANK METRIC RING SPANNER |
Product Code: 06341 Professional Quality, long series manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Ring ends are accurately broached with chamfered bi-hexagon profiles for easy nut location and are offset at 45&d...
|
| 41MM X 46MM ELORA LONG METRIC DOUBLE OPEN END SPANNER |
Product Code: 02117 Professional Quality, forged from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Jaws have accurate face openings and are offset at 15°. Sold loose.Manufactured to DIN 3110/ISO 3318/ISO 1085 Specifications...
|
| 42MM 3/4" SQUARE DRIVE ELORA BI-HEXAGON SOCKET |
Product Code: 00830 Professional Quality, sockets manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driving accessory with locking pin. Some socket sizes ...
|
| 450G (16 OZ) HICKORY SHAFT CLAW HAMMER |
Product Code: 42496 Polished face solid forged head from fine grain high carbon steel correctly hardened and tempered with a lacquer coating for rust protection. Natural straight grained hickory shaft sanded and lacquered. Sold Loose...
|
| 450G (16 OZ) TUBULAR SHAFT CLAW HAMMER |
Product Code: 51223 Polished face solid forged head from fine grain high carbon steel correctly hardened and tempered with a lacquer coating for rust protection. Hardened tubular shaft fitted with shock absorbing vinyl grip. Sold Loose....
|
| 450MM 1/2" SQUARE DRIVE ELORA FLEXIBLE HANDLE |
Product Code: 25507 Professional Quality, manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Plastic impact-resistant hand grip. Spring - loaded ball bearing for secure socket holding. Hinged joint head and positive st...
|
| 450MM ELORA ADJUSTABLE PIPE WRENCH |
Product Code: 23725 Professional Quality, manufactured from tool steel, hardened and tempered. The spring - loaded induction hardened jaws have wide faces serrated in opposite direction to ensure a secure grip. Polished head with blue lacquered handle. Sold loose....
|
| 450mm Petrol Chainsaw (45cc) |
Product Code: 80103 Features: Washable air filter, Walbro carburettor, Sprocket tip, Easy recoil startEngine capacity: 45cc - 2 strokeEngine output: 1700WBar length: 450mmMax engine speed: 11,000rpmChain pitch: 3.255mmChain gauge: 1.47mmFuel tank capacity: 550mlOil tank...
|
| 450MM SOFT COCO BROOM HEAD |
Product Code: 43771 Heavy duty, suitable for both indoor and outdoor use. Handles supplied separately - 23mm Draper Stock No. 43786 or 28mm Draper Stock No. 43787. Option of extra support through use of broom bracket - Draper Stock No. 43789, clamp - Draper Stock No. 43...
|
| 450MM STIFF BASSINE BROOM HEAD |
Product Code: 43773 Heavy duty, suitable for outdoor use. Handles supplied separately - 23mm Draper Stock No. 43786 or 28mm Draper Stock No. 43787. Option of extra support through use of broom bracket - Draper Stock No. 43789, clamp - Draper Stock No. 43790 or stay - Dr...
|
|
|
Basket 0 items - £0.00
