|
|
| DRAPER EXPERT 1/2" SQUARE DRIVE PRECISION TORQUE WRENCH |
Product Code: 58139 Expert Quality, with reversible ratchet head and locking preset action. Torque values are viewed via a window in the handle. Range 50 - 180Nm, accuracy ±4%. Overall length 520mm. Full instruction manual and calibration certificate included with ...
|
| DRAPER EXPERT 1/2" SQUARE DRIVE PRECISION TORQUE WRENCH |
Product Code: 58138 Expert Quality, with reversible ratchet head and locking preset action. Torque values are viewed via a window in the handle. Range 30 - 100Nm, accuracy ±4%. Overall length 420mm. Full instruction manual and calibration certificate included with ...
|
| DRAPER EXPERT 1/4" HOLLOW SQUARE MORTICE CHISEL WITH BIT |
Product Code: 48014 Expert Quality, manufactured from high carbon steel hardened and tempered. Chisels are finely ground and polished with honed cutting edges. Chisel shank diameter 13/16" (Stock No. 48080 is 1.3/16"). Display packed....
|
| DRAPER Expert 1/4"(F) x 3/8"(M) Impact Socket Converter |
Product Code: 07021 Expert Quality, forged from chrome molybdenum steel hardened, tempered and chemically blacked for corrosion protection. Hole for ball retainer in the female end and a spring ball retainer in the male end. Display packed....
|
| DRAPER EXPERT 10 PIECE 140MM DIAMOND NEEDLE FILE SET |
Product Code: 36326 Chromium plated and diamond coated 150 grit. Moulded plastic handles. Display packed in plastic case.1 x flat parallel1 x flat tapered1 x round1 x half round1 x square1 x three square1 x oval1 x crossing1 x barrette1 x knife...
|
| DRAPER Expert 10 Piece Assorted Jigsaw Blade Set |
Product Code: 81735 An assorted set for cutting softwoods, hardwoods and plastics. Display packed in plastic case1 x DT101AO 18TPI x 83mm1 x DT119BO 12TPI x 83mm2 x DT111C 8TPI x 100mm2 x DT101B 10TPI x 100mm2 x DT101D 6TPI x 100mm2 x DT144D 6TPI x 100mm...
|
| DRAPER Expert 10 Piece Assorted Jigsaw Blade Set |
Product Code: 81736 An assorted set for cutting softwoods, hardwoods and plastics. Display packed in plastic case1 x DT118G 32TPI x 75mm1 x DT118A 21TPI x 75mm2 x DT111C 8TPI x 100mm2 x DT101B 10TPI x 100mm2 x DT101D 6TPI x 100mm2 x DT144D 6TPI x 100mm...
|
| DRAPER Expert 10 x 120mm Masonry Drill Bit |
Product Code: 40714 Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Display packed.Manufactured to ISO 5468 Specifications...
|
| DRAPER Expert 10 x 150mm Masonry Drill Bit |
Product Code: 40793 Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Display packed.Manufactured to ISO 5468 Specifications...
|
| DRAPER Expert 10 x 200mm Masonry Drill Bit |
Product Code: 40798 Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Display packed.Manufactured to ISO 5468 Specifications...
|
| DRAPER EXPERT 10 x JUNIOR HACKSAW BLADES |
Product Code: 69305 Expert Quality, general purpose cutting blades with pinned ends. Will fit all junior hacksaw frames. Packed ten blades on display card or in bags of 100 blades.Manufactured to BS6271...
|
| DRAPER Expert 10-12mm Spark Plug Chaser |
Product Code: 51767 Expert Quality, covering two common sizes 10mm and 12mm spark plugs threads. Driven by a 21mm spark plug socket, will clean carbon and corrosion clogged spark plug threads. Can also be used to repair minor thread damage. Display packed....
|
| DRAPER Expert 10.0 X 160mm SDS+ Masonry Drill |
Product Code: 40843 Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Manufactured to ISO 5468 specifications. Display packed.Manufactured to ISO 5468 Specifications...
|
| DRAPER Expert 10.0 X 210mm SDS+ Masonry Drill |
Product Code: 40844 Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Manufactured to ISO 5468 specifications. Display packed.Manufactured to ISO 5468 Specifications...
|
| DRAPER Expert 10.0 X 260mm SDS+ Masonry Drill |
Product Code: 40845 Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Manufactured to ISO 5468 specifications. Display packed.Manufactured to ISO 5468 Specifications...
|
| DRAPER Expert 10.0mm HSS Cobalt Drill |
Product Code: 39240 Expert Quality, metric-sized high speed steel drills (with 5% cobalt). The addition of cobalt to HSS prevents wear for longer life. Display packed....
|
| DRAPER Expert 10.0mm Wood Drill Bit |
Product Code: 41797 Expert Quality, manufactured from hardened and correctly tempered carbon steel. Suitable for use with hand and power drills. Packed one or two drill bits per hang up card....
|
|
|
Basket 0 items - £0.00
