|
|
| DRAPER Expert 108mm HSS Bi-Metal Holesaw Blade |
Product Code: 34771 These high-speed variable pitch bi-metal hole saws are ideal for cutting perfectly round and accurate holes in metals, plastics and wood up to a depth of 35mm (1.3/8”). They offer a hardened M3 steel cutting edge that is welded to a tough alloy...
|
| DRAPER Expert 10L EPDM Pump Sprayer |
Product Code: 82460 Expert Quality, hand held sprayer with Ethylene Propylene Diene Monomer rubber (EPDM) seals & gaskets. Like all our sprayers, EPDM sprayers can be used for water as well as herbicide and pesticide spraying, but the high quality seals cater for use on...
|
| DRAPER Expert 10M/33ft Professional Measuring Tape |
Product Code: 82816 Expert Quality, ABS case with soft grip. Fitted with a large blade-locking button and belt clip. The nylon-coated blade has clear black and red metric and imperial graduations, metres into cm/mm and feet into inches, 1/8" and 1/16" on both sides and ...
|
| DRAPER EXPERT 10MM 1/2" SQUARE DRIVE POWERDRIVE IMPACT SOCKET |
Product Code: 26878 Expert Quality, 6 point socket forged from chrome vanadium steel hardened, tempered and chemically blacked for corrosion protection. These socket are for use with air, electric or manual impact wrenches.Safety Note: ONLY impact sockets and accessorie...
|
| DRAPER Expert 10mm 1/4" Square Drive Hi-Torq® 6 Point Impact Socket |
Product Code: 05014 Expert Quality, 6 point sockets forged from chrome molybdenum hardened, tempered and chemically blacked for corrosion protection. These sockets are for use with air, electric or manual impact wrenches. Display packed.Safety Note: ONLY impact sockets ...
|
| DRAPER Expert 10mm 3/8" Square Drive Hi-Torq® 6 Point Impact Socket |
Product Code: 06869 Expert Quality, 6 point sockets forged from chrome molybdenum hardened, tempered and chemically blacked for corrosion protection. These sockets are for use with air, electric or manual impact wrenches. Display packed.Safety Note: ONLY impact sockets ...
|
| DRAPER EXPERT 10MM WOOD CHISEL |
Product Code: 89325 Expert Quality, full length bevel edged blades manufactured from chrome vanadium steel hardened, tempered, finely ground and clear lacquer coated for corrosion protection. Impact - resistant soft grip polypropylene handles with striking caps. All bla...
|
| DRAPER EXPERT 10MM X 100MM OCTAGONAL FLAT COLD CHISEL |
Product Code: 51538 Expert Quality, manufactured from special air hardened chrome vanadium steel for long life. The cutting edges are accurately ground, with specially tempered heads. Sold loose.Manufactured to DIN 7254B and GS Specifications...
|
| DRAPER EXPERT 10MM X 11MM HI-TORQ DEEP OFFSET RING SPANNER |
Product Code: 55687 Expert Quality, with Draper Expert HI-TORQ® ring ends cranked at 15°, except Stock Nos. 55703 to 55708 which are bi - hexagon. Long pattern forged from chrome vanadium steel, hardened, tempered, chrome plated and fully polished throughout. o...
|
| DRAPER EXPERT 10MM X 11MM OPEN END SPANNER |
Product Code: 55713 Expert Quality, forged from chrome vanadium steel hardened, tempered, chrome plated and fully polished. Open ends set at 15°.Generally in accordance with DIN3113 Specifications...
|
| DRAPER Expert 11 Piece Universal Clutch Aligning Kit |
Product Code: 23238 Expert Quality, for fast accurate alignment of flywheel pilot hole with clutch drive plate when assembling to vehicles. Supplied with eight precision manufactured steel bushes and three expanding mandrels. Suitable for most cars and light commercial ...
|
| DRAPER Expert 11.0mm HSS Cobalt Drill |
Product Code: 39248 Expert Quality, metric-sized high speed steel drills (with 5% cobalt). The addition of cobalt to HSS prevents wear for longer life. Display packed....
|
| DRAPER Expert 11.0mm HSS Drill |
Product Code: 38658 Expert Quality, HSS drill bits, manufactured to DIN338 and ISO235/1 specifications. Display packed.Manufactured to ISO 235/1 Specifications...
|
| DRAPER Expert 11.3mm HSS Cobalt Drill |
Product Code: 39249 Expert Quality, metric-sized high speed steel drills (with 5% cobalt). The addition of cobalt to HSS prevents wear for longer life. Display packed....
|
| DRAPER Expert 11.5mm HSS Cobalt Drill |
Product Code: 39250 Expert Quality, metric-sized high speed steel drills (with 5% cobalt). The addition of cobalt to HSS prevents wear for longer life. Display packed....
|
| DRAPER Expert 11.5mm HSS Drill |
Product Code: 38659 Expert Quality, HSS drill bits, manufactured to DIN338 and ISO235/1 specifications. Display packed.Manufactured to ISO 235/1 Specifications...
|
| DRAPER Expert 111mm Cobalt Hole Saw |
Product Code: 34812 Expert Quality, cobalt variable pitch hole saw manufactured from quality steel with 8% cobalt content for durability. Suitable for cutting steel, brass, bronze, cast iron, aluminium, wood and plastics. Maximum cutting depth 35mm. Display packed.To co...
|
| DRAPER Expert 111mm HSS Bi-Metal Holesaw Blade |
Product Code: 34772 These high-speed variable pitch bi-metal hole saws are ideal for cutting perfectly round and accurate holes in metals, plastics and wood up to a depth of 35mm (1.3/8”). They offer a hardened M3 steel cutting edge that is welded to a tough alloy...
|
|
|
Basket 0 items - £0.00
