TREND 10/99X1/2TC MITRE LOCK JOINTER A=45

Machining of this joint is carried out by routing one piece with the inside face on the table.
The matching corner inside face is machined upright against the fence.
Make sure that the cutter is centred on the workpiece. The cutter can also be used for a glue joint, for joining lengths together.
Ideal for speaker cabinets and drawer construction.
Please note.
These tools cannot be re-sharpened.
Inverted use only.
Use on MDF and natural timbers.

Dimensions:
D=68 mm
C=30 mm
C2=12.5 mm
A=45 degrees
OL=77.5 mm
Shank Diameter=1/2 inch
Timber thickness min.=15 mm
Timber thickness max.=25 mm
For stationary machines at max. recommended speed 16,000 RPM

Shank Diameter: 1/2

Diameter Metric: 68

Cut Length Metric: 30

Overall Length Metric: 77.5

Angle: 45