TREND MT/JIG MORTISE & TENON JIG

Enables mortise & tenons and dowel joints to be cut with a router.
Ideal for cabinet, chair and table.
CNC precision manufactured plates and body.
One set-up for both mortise and tenon giving perfectly fitting joints.
Fully adjustable for compound angle joints up to 45 degree.
Reversible templates to produce round and square end tenons.
Templates can be used for accurate dowelling applications.
Cuts mortise & tenon sizes of 1/4 inch (6.35mm) to 5/8 inch (15.9mm).
Guide bushes are included but cutters are required.
A Unibase may be required for certain makes & models of router.
All tenons are cut with a 5/8 inch diameter straight cutter (Ref. C026).
The width of the tenon is adjusted by using different guide bush diameters.
Jig requires:
A portable plunge router with 6.35 mm (1/4 inch) shank capacity.

Dimensions:
Material thickness min.=12 mm
Material thickness max.=47 mm
Tenon thickness min.=4.8 mm
Tenon thickness max.=16 mm
Tenon width max. using vertical guide+=90 mm
Tenon length max.++=Approx. 25 mm
Mortise length max. using vertical guide+++=90 mm
Angle tilt compound=-10 degree to 45 degrees
++ depends on cut length and plunge depth of the router.
+++unlimited if vertical guide removed and wood repositioned.