Straight Two Flute

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=5/32 inch D=4 mm C=11 mm OL=65 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperia...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=2.5 mm C=8 mm OL=48 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 2.5 Cut L...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=3 mm C=11 mm OL=59 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 3 Cut Leng...

Two flutes give a clean finish to cut edges. Dimensions: D=5/64 inch D=2 mm C=5 mm OL=43 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperial: 5/64 Diameter Metric: 2 Cut Length Metric: 5 Overall Length Metric: 43...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=13/64 inch D=5 mm C=16 mm OL=69 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperi...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=1/4 inch D=6.3 mm C=25 mm OL=70 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Imperi...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=1/4 inch D=6.3 mm C=25 mm OL=69 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperi...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=6.5 mm C=25 mm OL=57 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 6.5 Cut ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=15/64 inch D=6 mm C=16 mm OL=59 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperi...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=9/32 inch D=7 mm C=19 mm OL=50 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperia...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=5/16 inch D=8 mm C=25 mm OL=69 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Imperia...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=5/16 inch D=8 mm C=25 mm OL=57 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperia...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=8.9 mm C=25 mm OL=70 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 8.9 Cut ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=5/16 inch D=8 mm C=19 mm OL=52 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperia...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=3/8 inch D=9.5 mm C=25 mm OL=71 mm Shank Diameter=1/2 inch Shank D...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=25/64 inch D=10 mm C=35 mm OL=81 mm Shank Diameter=1/2 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=25/64 inch D=10 mm C=25 mm OL=71 mm Shank Diameter=1/2 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=25/64 inch D=10 mm C=25 mm OL=65 mm Shank Diameter=1/4 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=15/32 inch D=12 mm C=25 mm OL=68 mm Shank Diameter=1/2 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=15/32 inch D=12 mm C=38 mm OL=80 mm Shank Diameter=1/2 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=15/32 inch D=12 mm C=50 mm OL=109 mm Shank Diameter=1/2 inch Especi...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=15/32 inch D=12 mm C=50 mm OL=109 mm Shank Diameter=1/2 inch Shank...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=15/32 inch D=12 mm C=1 1/4 inch C=32 mm OL=73 mm Shank Diameter=1/2...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=15/32 inch D=12 mm C=2 1/2 inch C=63 mm OL=114 mm Shank Diameter=1/...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=31/64 inch D=12.55 mm C=25.4 mm OL=67 mm Shank Diameter=1/4 inch S...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=7/16 inch D=11 mm C=25 mm OL=57 mm Shank Diameter=1/4 inch Shank D...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=1/2 inch D=12.7 mm C=19 mm OL=51 mm Shank Diameter=1/4 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=1/2 inch D=12.7 mm C=32 mm OL=77 mm Shank Diameter=1/2 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=1/2 inch D=12.7 mm C=32 mm OL=64 mm Shank Diameter=1/4 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=1/2 inch D=12.7 mm C=37 mm OL=79 mm Shank Diameter=1/2 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Ideal for cutting kitchen worktops. TC tips are ground with greater clearance for ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Ideal for cutting kitchen worktops Dimensions: D=1/2 inch D=12.7 mm C=50 mm OL=99...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Short shank for Makita 3600B & 3612BR, Ryobi and Hitachi routers. Ideal for cutting kitchen worktops. Dimensio...

TCT extra long cutter. Two flutes give a clean finish to cut edges. Use only on professional routers with 80mm deep plunge and suitable one piece multi-slit collet to ensure safe cutter retraction into base. Dimensions: D=1/2 inch D=12.7 mm C=50 mm ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Ideal for cutting kitchen worktops. Dimensions: D=1/2 inch D=12.7 mm C=63 mm OL=115 mm Shank Diameter=1/2 inch...

Extra long two flute cutter for routing hollow honey-comb work top boards only. Use only in professional routers with an 80mm deep plunge and suitable one piece multi-slit collet to ensure safe cutter retraction into the router base. TC tips are conv...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=15/32 inch D=12 mm C=19 mm OL=59 mm Shank Diameter=1/4 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=33/64 inch D=13 mm C=20 mm OL=52 mm Shank Diameter=1/4 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=35/64 inch D=14 mm C=25 mm OL=56 mm Shank Diameter=1/4 inch ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=15 mm C=35 mm OL=76 mm Shank Diameter=1/2 inch Shank Diameter: 1/2...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=7/8 inch D=22.2 mm C=19 mm OL=51 mm Shank Diameter=1/4 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=33/64 inch D=13 mm C=26 mm OL=57 mm Shank Diameter=1/4 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=5/8 inch D=15.9 mm C=37 mm OL=79 mm Shank Diameter=1/2 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=43/64 inch D=17 mm C=25 mm OL=65 mm Shank Diameter=1/2 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=43/64 inch D=17 mm C=25 mm OL=54 mm Shank Diameter=1/4 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=45/64 inch D=18 mm C=25 mm OL=57 mm Shank Diameter=1/4 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=5/8 inch D=16 mm C=19 mm OL=52 mm Shank Diameter=1/4 inch Shank Di...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=45/64 inch D=18 mm C=50 mm OL=92 mm Shank Diameter=1/2 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=23/32 inch D=18.2 mm C=32 mm OL=74 mm Shank Diameter=1/2 inch Shan...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=23/32 inch D=18.2 mm C=21 mm OL=53 mm Shank Diameter=1/4 inch Shan...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=3/4 inch D=19.1 mm C=37 mm OL=79 mm Shank Diameter=1/2 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=19.1 mm C=63 mm OL=105 mm Shank Diameter=1/2 inch Shank Diameter: ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=55/64 inch D=22 mm C=19 mm OL=57 mm Shank Diameter=1/2 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=55/64 inch D=22 mm C=19 mm OL=50 mm Shank Diameter=1/4 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=53/64 inch D=21 mm C=19 mm OL=50 mm Shank Diameter=1/4 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=25/32 inch D=20 mm C=25 mm OL=66 mm Shank Diameter=1/2 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=25/32 inch D=20 mm C=25 mm OL=57 mm Shank Diameter=1/4 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=63/64 inch D=25 mm C=25 mm OL=65 mm Shank Diameter=1/2 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=29/32 inch D=23 mm C=19 mm OL=50 mm Shank Diameter=1/4 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=61/64 inch D=24 mm C=19 mm OL=50 mm Shank Diameter=1/4 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=7/8 inch D=22.2 mm C=31 mm OL=73 mm Shank Diameter=1/2 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=1 inch D=25.4 mm C=37 mm OL=79 mm Shank Diameter=1/2 inch Shank Di...