Trend

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. Dimensions: D=1 1/2 inch D=38.1 mm C=16 mm B=38.1 mm OL=69 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Imperial: 1 1/2 ...

Produces an elegant edge mould, or a shallow panel effect when routing on its full width. Dimensions: D=20 mm C=15 mm R=6 mm OL=53 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Metric: 20 Cut Length Metric: 15 Overall Length Metric: 53...

Flat Roman Ogee, for raised panelling or edge moulding. Used for decorative capping on hand rails. Dimensions: D=41.5 mm C=8 mm C2=8 mm R=19 mm R2=11 mm OL=56 mm Shank Diameter=1/2 inch For stationary machines at max. recommended speed 18,000 RPM S...

Flat Roman Ogee, for raised panelling or edge moulding. Used for decorative capping on hand rails. Dimensions: D=50 mm C=6.5 mm C2=11.5 mm R=20 mm R2=12 mm OL=51.8 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Metric: 50 Cut Length Metr...

Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These have four to six wings to ensure a clean cut. Use a slow, constant feed rate ensuring timber is clamped to...

Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These have four to six wings to ensure a clean cut. Use a slow, constant feed rate ensuring timber is clamped to...

Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These have four to six wings to ensure a clean cut. Use a slow, constant feed rate ensuring timber is clamped to...

Precision made Carbon Steel plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. High precision CNC ground flutes for improved quality of cutting edge geometry and precise diameter ...

These plug cutters produces plugs to exactly fit counterbored holes produced by Ref. 62 & 63 group tools. Use at recommended speeds of 1000-20000 RPM. Dimensions: D=12 mm C=16 mm OL=55 mm Shank Diameter=1/4 inch Body=19 mm Shank Diameter: 1/4 Diam...

These plug cutters produces plugs to exactly fit counterbored holes produced by Ref. 62 & 63 group tools. Use at recommended speeds of 1000-20000 RPM. Dimensions: D=16 mm C=16 mm OL=55 mm Shank Diameter=1/4 inch Body=22 mm Shank Diameter: 1/4 Diam...

A Tapered plug ensures an exceptionally tight fit is achieved. Tapered plug cutters with Tungsten Carbide Tips will produce many hundreds of plugs before resharpening is required. For use in drilling machines at a recommended speed of 3000 RPM (ma...

These plug cutters produces plugs to exactly fit counterbored holes produced by Ref. 62 & 63 group tools. Use at recommended speeds of 1000-20000 RPM. Dimensions: D=3/8 inch D=9.5 mm C=16 mm OL=56 mm Shank Diameter=1/4 inch Body=19 mm Shank Diamete...

To adjust the groove width these tools can be re-assembled with the supplied shims and spacers inserted between the groovers, giving a 0.1mm increment in thickness. Dimensions: D=1 31/32 inch D=50 mm C=3-5 mm B=28 mm E=11 mm OL=76 mm Shank Diameter...

To adjust the groove width these tools can be re-assembled with the supplied shims and spacers inserted between the groovers, giving a 0.1mm increment in thickness. Dimensions: D=1 31/32 inch D=50 mm C=5-9 mm B=28 mm E=11 mm OL=76 mm Shank Diameter...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=5/32 inch D=4 mm C=11 mm OL=63 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Imperia...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=5/32 inch D=4 mm C=11 mm OL=65 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperia...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=1/4 inch D=6.3 mm C=19 mm OL=61 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperia...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=4.5 mm C=11 mm OL=51 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 4.5 Cut ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=2.5 mm C=8 mm OL=48 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 2.5 Cut L...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=3 mm C=11 mm OL=59 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 3 Cut Leng...

Two flutes give a clean finish to cut edges. Dimensions: D=5/64 inch D=2 mm C=5 mm OL=43 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperial: 5/64 Diameter Metric: 2 Cut Length Metric: 5 Overall Length Metric: 43...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=5/64 inch D=2 mm C=5 mm OL=50 mm Shank Diameter=8 mm Shank Diameter: 8 mm Diameter Imperial: 5...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=5/32 inch D=4 mm C=15.9 mm OL=56 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imper...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=1/2 inch D=12.7 mm C=25 mm OL=68 mm Shank Diameter=1/2 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Dimensions: D=1/2 inch D=12.7 mm C=25 mm OL=55 mm Shank Diameter=1/4 inch Shank ...

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Dimensions: D=3/16 inch D=4.7 mm C=11 mm OL=56 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Imper...