|
|
Trend |
| TREND C117AX1/2TC GUIDED TRIMMER 19.1MM X 25MM |
Product Code: C117AX1/2TC Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D1=3/4 inches
D1=19.1 mm
C=1 inches
C=25 mm
B=15.9 mm
A=90 degrees
OL=76.5 mm
Shank Diameter=1/2
Shank Diameter: 1/2
Diameter Imperial: 3/4
Diamet...
|
| TREND C117AX1/4TC GUIDED TRIMMER 19.1MM X 25MM |
Product Code: C117AX1/4TC Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D1=3/4 inches
D1=19.1 mm
C=1 inches
C=25 mm
B=15.9 mm
A=90 degrees
OL=78.5 mm
Shank Diameter=1/4
Shank Diameter: 1/4
Diameter Imperial: 3/4
Diamet...
|
| TREND C117BX1/2TC TRIMMING 19.1MM DIA X 50MM CUT |
Product Code: C117BX1/2TC Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D1=3/4 inch
D1=19.1 mm
C=50 mm
OL=4 1/64 inch
OL=102 mm
B=15.9 mm
A=90 degrees
Shank Diameter=1/2
Shank Diameter: 1/2
Diameter Imperial: 3/4
Diame...
|
| TREND C117X1/4TC GUIDED TRIMMER 15.9MM DIA |
Product Code: C117X1/4TC Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=5/8 inch
D=15.9 mm
C=5/8 inch
C=15.9 mm
OL=2 41/64 inch
OL=67.5 mm
B=15.9 mm
A=90 degrees
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Im...
|
| TREND C119X1/4TC S/GUIDED BEVEL TRIM A=65 |
Product Code: C119X1/4TC This is bearing guided and gives a smooth bevel finish for laminates and other materials.
Bearing follows the board beneath.
Dimensions:
D=18.5 mm
C=1/4 inch
C=6.3 mm
B=12.7 mm
A=65 degrees
OL=58 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Cu...
|
| TREND C120X1/4TC KEYHOLE 9.5MM DIA |
Product Code: C120X1/4TC For picture hanging flush to the wall.
Plunge cutter & move forward, then retract out from entry hole.
A template is recommended.
For No8 & No10 screw heads.
Not suitable for grooving applications.
Dimensions:
D=9.5 mm
D2=4.5 mm
C=4.5 mm
Shank...
|
| TREND C121AX8MMTC TEMPLATE/PROFILE 16.0MM DIA |
Product Code: C121AX8MMTC Shank mounted bearing profilers are ideal for template guidance.
Use for rebating and trimming edges only.
Extra care must be taken to avoid cutter breakage.
Dimensions:
D=5/8 inch
D=16 mm
C=3/4 inch
C=19 mm
OL=65 mm
Shank Diameter=8 mm
Shank D...
|
| TREND C121BX1/4TC PROFILER 12.7MM X 9.5MM CUT |
Product Code: C121BX1/4TC Trend Craft Pro 1/4in shank bearing guided flush trimming cutter - 12.7mm diameter Two Flute Carbide tips.
Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers.
12.7mm diameter X 9.5mm cutting ...
|
| TREND C121CX1/4TC PROFILER 16MM DIA X 25MM |
Product Code: C121CX1/4TC Shank mounted bearing profilers are ideal for template guidance.
Use for rebating and trimming edges only.
Extra care must be taken to avoid cutter breakage.
Dimensions:
D=1/2 inch
D=15.9mm
C=25 mm
OL=71 mm
Shank Diameter=1/4 inch
Shank Diamete...
|
| TREND C121DX1/4TC PROFILER 12.7MM DIA X 32MM CUT |
Product Code: C121DX1/4TC Shank mounted bearing profilers are ideal for template guidance.
Use for rebating and trimming edges only.
Extra care must be taken to avoid cutter breakage.
Dimensions:
D=1/2 inch
D=12.7 mm
C=1 1/4 inch
C=32 mm
OL=77.5 mm
Shank Diameter=1/4 inc...
|
| TREND C121EX1/4TC PROFILER 15.9MM DIA X 12.7MM CUT |
Product Code: C121EX1/4TC Shank mounted bearing profilers are ideal for template guidance.
Use for rebating and trimming edges only.
Extra care must be taken to avoid cutter breakage.
Dimensions:
D=5/8 inch
D=15.9mm
C=1/2 inch
C=12.7 mm
OL=58.5 mm
Shank Diameter=1/4 inch...
|
| TREND C121FX1/4TC GUIDED PROFILER 12.7MM X 12.7MM CUT |
Product Code: C121FX1/4TC Shank mounted bearing profilers are ideal for template guidance.
Use for rebating and trimming edges only.
Extra care must be taken to avoid cutter breakage.
Dimensions:
D=12.7 mm
C=12.7 mm
C= 1/2 inch
Ol=57 mm
B=12.7 mm
Shank Diameter=1/4 inch
...
|
| TREND C121GX1/4TC GUIDED PROFILER 9.5MM X 6.35MM CUT |
Product Code: C121GX1/4TC Shank mounted bearing profilers are ideal for template guidance.
Use for rebating and trimming edges only.
Extra care must be taken to avoid cutter breakage.
Dimensions:
D=9.5 mm
C=6.35 mm
C=1/4 inch
Ol=53 mm
B=9.5 mm
Shank Diameter=1/4 in...
|
| TREND C121HX1/4TC GUIDED PROFILER 9.5MM X 12.7MM CUT |
Product Code: C121HX1/4TC Shank mounted bearing profilers are ideal for template guidance.
Use for rebating and trimming edges only.
Extra care must be taken to avoid cutter breakage.
Dimensions:
D=9.5 mm
C=12.7 mm
C=1/2 inch
Ol=54 mm
B=9.5 mm
Shank Diameter=1/4 inch
Sh...
|
| TREND C121PX1/4TC GUIDED PROFILER 9.5MM X 25MM CUT |
Product Code: C121PX1/4TC Shank mounted bearing profilers are ideal for template guidance.
Use for rebating and trimming edges only.
Extra care must be taken to avoid cutter breakage.
Dimensions:
D=9.5 mm
D=3/8 inch
C=25 mm
C=1 inch
Ol=63 mm
B=9.5 mm
Shank Diameter=1/4 i...
|
| TREND C121X1/4TC TEMPLATE/PROFILE 12.7MM DIA |
Product Code: C121X1/4TC Trend Craft Pro 1/4in shank bearing guided flush trimming cutter - 12.7mm diameter Two Flute Carbide tips.
Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers.
12.7mm diameter X 25.4mm cutting...
|
| TREND C122X1/4TC CAVETTO 7.9MM RAD X 15.9MM CUT |
Product Code: C122X1/4TC Self guiding cavetto style cutter, which follow the board edges for straight or curved work radius.
Dimensions:
C=5/8 inch
C=15.9 mm
D=34.5 mm
B=12.7 mm
R=7.9 mm
OL=67.5 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 34.5
Cut Len...
|
| TREND C123X1/4TC TEMPLATE/PROFILE 19.1MM DIA |
Product Code: C123X1/4TC Shank mounted bearing profilers are ideal for template guidance.
Use for rebating and trimming edges only.
Extra care must be taken to avoid cutter breakage.
Dimensions:
D=3/4 inch
D=19.1 mm
C=1 inch
C=25.4 mm
OL=65.5 mm
Shank Diameter=1/4 inch
...
|
| TREND C124X1/4TC STRAIGHT 12.7MM DIA X 12.7MM CUT |
Product Code: C124X1/4TC Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.
Use on softwoods, hardwoods, MDF, plywood and chipboard.
Cutter has a bottom cut feature.
Dimensions:
D=1/2 inch
D=12.7 mm
C=1/2 inch
C=12.7 m...
|
| TREND C125X1/4TC STRAIGHT 15.9MM DIA X 12.7MM CUT |
Product Code: C125X1/4TC Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.
Use on softwoods, hardwoods, MDF, plywood and chipboard.
Cutter has a bottom cut feature.
Dimensions:
D=5/8 inch
D=15.9 mm
C=1/2 inch
C=12.7 m...
|
| TREND C126X1/4TC ROUND/OVER 4.8MM RAD X 12.7MM CUT |
Product Code: C126X1/4TC For producing ovolo and rounding over edge moulds, using a side fence or back fence.
Dimensions:
D=1/2 inch
D=12.7 mm
C=23/64 inch
C=9 mm
R=4.8 mm
OL=51.5 mm
Flat tip width=3.5 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 1/2
...
|
| TREND C127X1/4TC ROUND/OVER 6.3MM RAD X 15.9MM CUT |
Product Code: C127X1/4TC For producing ovolo and rounding over edge moulds, using a side fence or back fence.
Dimensions:
D=5/8 inch
D=15.9 mm
C=13.5 mm
R=6.3 mm
OL=57 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 5/8
Diameter Metric: 15.9
Cut Length...
|
| TREND C128X1/4TC ROUND/OVER 9.5MM RAD X 22.2MM CUT |
Product Code: C128X1/4TC For producing ovolo and rounding over edge moulds, using a side fence or back fence.
Dimensions:
D=7/8 inch
D=22.2 mm
C=19/32 inch
C=15 mm
R=9.5 mm
OL=58.5 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 7/8
Diameter Metric: 22....
|
| TREND C130X1/4TC CORNER BEAD 4.8MM RAD X 26MM DIA |
Product Code: C130X1/4TC Attractive edge moulds.
A full corner bead can be produced by making a second pass at 90 degrees.
Dimensions:
D=1 1/32 inch
D=26 mm
D2=22 mm
C=5/8 inch
C=16 mm
B=15.9 mm
R=4.8 mm
OL=70.5 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imp...
|
|
|
Basket 0 items - £0.00
