|
|
Trend |
| TREND 4/30X1/2TC TWO FLUTE 18MM DIA X 50MM 257052 |
Product Code: 4/30X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=45/64 inch
D=18 mm
C=50 mm
OL=92 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/40X1/2TC TWO FLUTE 18.2MM DIA X 32MM CUT |
Product Code: 4/40X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=23/32 inch
D=18.2 mm
C=32 mm
OL=74 mm
Shank Diameter=1/2 inch
Shan...
|
| TREND 4/4X1/2TC TWO FLUTE 18.2MM DIA X 19MM CUT |
Product Code: 4/4X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=23/32 inch
D=18.2 mm
C=21 mm
OL=62 mm
Shank Diameter=1/2 inch
Shan...
|
| TREND 4/4X1/4TC TWO FLUTE 18.2MM DIA X 21MM 257037 |
Product Code: 4/4X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=23/32 inch
D=18.2 mm
C=21 mm
OL=53 mm
Shank Diameter=1/4 inch
Shan...
|
| TREND 4/50X1/2TC TWO FLUTE 19MM DIA X 37MM CUT |
Product Code: 4/50X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=3/4 inch
D=19.1 mm
C=37 mm
OL=79 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/51X1/2TC TWO FLUTE 19MM DIA X 50MM CUT |
Product Code: 4/51X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=3/4 inch
D=19.1 mm
C=50 mm
OL=92 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/52X1/2TC TWO FLUTE 19.1MM DIA X 63MM CUT |
Product Code: 4/52X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=19.1 mm
C=63 mm
OL=105 mm
Shank Diameter=1/2 inch
Shank Diameter: ...
|
| TREND 4/5X1/2TC TWO FLUTE 19MM DIA X 25MM 257053 |
Product Code: 4/5X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=3/4 inch
D=19.1 mm
C=25 mm
OL=67 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/5X1/4TC TWO FLUTE 19MM DIA X 25MM 253340 |
Product Code: 4/5X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=3/4 inch
D=19.1 mm
C=25 mm
OL=58 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 4/60X1/2TC TWO FLUTE 22MM DIA X 19MM CUT |
Product Code: 4/60X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=55/64 inch
D=22 mm
C=19 mm
OL=57 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/60X1/4TC TWO FLUTE 22MM DIA X 19MM CUT |
Product Code: 4/60X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=55/64 inch
D=22 mm
C=19 mm
OL=50 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 4/62X1/2TC TWO FLUTE 21MM DIA X 19MM CUT |
Product Code: 4/62X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=53/64 inch
D=21 mm
C=19 mm
OL=59 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/62X1/4TC TWO FLUTE 21MM DIA X 19MM CUT |
Product Code: 4/62X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=53/64 inch
D=21 mm
C=19 mm
OL=50 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 4/63X1/4TC TWO FLUTE 20MM DIA X 20MM CUT |
Product Code: 4/63X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=25/32 inch
D=20 mm
C=20 mm
OL=53 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 4/66X1/2TC TWO FLUTE 22MM DIA X 25MM CUT |
Product Code: 4/66X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=22 mm
C=25 mm
OL=66 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2...
|
| TREND 4/6X1/2TC TWO FLUTE 20MM DIA X 25MM 257054 |
Product Code: 4/6X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=25/32 inch
D=20 mm
C=25 mm
OL=66 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/6X1/4TC TWO FLUTE 20MM DIA X 25MM 257038 |
Product Code: 4/6X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=25/32 inch
D=20 mm
C=25 mm
OL=57 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 4/70X1/2TC TWO FLUTE 25 MM DIA X 25MM CUT |
Product Code: 4/70X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=63/64 inch
D=25 mm
C=25 mm
OL=65 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/70X1/4TC TWO FLUTE 25MM DIA X 25MM CUT |
Product Code: 4/70X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=63/64 inch
D=25 mm
C=25 mm
OL=56 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 4/71X1/2TC TWO FLUTE 23MM DIA X 19MM CUT |
Product Code: 4/71X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=29/32 inch
D=23 mm
C=19 mm
OL=57 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/71X1/4TC TWO FLUTE 23MM DIA X 19MM CUT |
Product Code: 4/71X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=29/32 inch
D=23 mm
C=19 mm
OL=50 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 4/72X1/4TC TWO FLUTE 24MM DIA X 19MM CUT |
Product Code: 4/72X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=61/64 inch
D=24 mm
C=19 mm
OL=50 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 4/7X1/2TC TWO FLUTE 22.2MM DIA X 31MM 257055 |
Product Code: 4/7X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=7/8 inch
D=22.2 mm
C=31 mm
OL=73 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/80X1/2TC TWO FLUTE 25.4MM DIA X 37MM CUT |
Product Code: 4/80X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=1 inch
D=25.4 mm
C=37 mm
OL=79 mm
Shank Diameter=1/2 inch
Shank Di...
|
| TREND 4/83X1/2TC TWO FLUTE 27MM DIA X 32MM CUT |
Product Code: 4/83X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=1 1/16 inch
D=27 mm
C=32 mm
OL=72 mm
Shank Diameter=1/2 inch
Shank...
|
| TREND 4/85X1/2TC TWO FLUTE 28MM DIA X 25MM CUT |
Product Code: 4/85X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=1 7/64 inch
D=28 mm
C=25 mm
OL=66 mm
Shank Diameter=1/2 inch
Shank...
|
|
|
Basket 0 items - £0.00
