|
|
Trend |
| TREND S55/02LHX1/4STC SPIRAL 3.2MM DIA X 12.7MM DOWNCUT |
Product Code: S55/02LHX1/4STC Down-cut spirals are ideal for routing small workpieces or for holding workpieces secure in vacuum jigs.
Down-cut pushes woodchips below the work.
Two flute.
Dimensions:
D=1/8 inch
D=3.2 mm
C=1/2 inch
C=12.7 mm
OL=50.8 mm
Shank Diameter=1/4 inch
...
|
| TREND S55/02X1/4STC SPIRAL 3.2MM DIA X 12.7MM UPCUT |
Product Code: S55/02X1/4STC Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers.
Feed rates range from 5- 10m/min of 18000 - 24000 RPM.
Ideal for hardwoods and abrasive material.
Fine finish.
Up-cut prevents burning in plu...
|
| TREND S55/03LHX1/4STC SPIRAL 3.96MM DIA X 16MM DOWNCUT |
Product Code: S55/03LHX1/4STC Down-cut spirals are ideal for routing small workpieces or for holding workpieces secure in vacuum jigs.
Down-cut pushes woodchips below the work.
Two flute.
Dimensions:
D=5/32 inch
D=3.96 mm
C=5/8 inch
C=15.9 mm
OL=63.5 mm
Diameter Imperial: 5/3...
|
| TREND S55/03X1/4STC SPIRAL 3.96MM DIA X 16MM UPCUT |
Product Code: S55/03X1/4STC Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers.
Feed rates range from 5- 10m/min of 18000 - 24000 RPM.
Ideal for hardwoods and abrasive material.
Fine finish.
Up-cut prevents burning in plu...
|
| TREND S55/04LHX1/4STC SPIRAL 4.75MM DIA X 19MM DOWNCUT |
Product Code: S55/04LHX1/4STC Down-cut spirals are ideal for routing small workpieces or for holding workpieces secure in vacuum jigs.
Down-cut pushes woodchips below the work.
Two flute.
Dimensions:
D=3/16 inch
D=4.76 mm
C=19.1 mm
OL=63.5 mm
Shank Diameter=1/4 inch
Shank Dia...
|
| TREND S55/04X1/4STC SPIRAL 4.75MMDIA X 19MM UPCUT |
Product Code: S55/04X1/4STC Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers.
Feed rates range from 5- 10m/min of 18000 - 24000 RPM.
Ideal for hardwoods and abrasive material.
Fine finish.
Up-cut prevents burning in plu...
|
| TREND S55/06LHX8MMSTC SPIRAL 8MM DIA X 25MM DOWN CUT |
Product Code: S55/06LHX8MMSTC Trend 8mm diameter down cut spiral cutter - 8mm shank, 25mm cut length.
Spiral downcutting configuration offers the cleanest finish on the top surface of the workpiece when used in hand held or overhead CNC routing applications.
Two flute design is i...
|
| TREND S55/06X8MMSTC SPIRAL 8MM DIA X 25MM UPCUT |
Product Code: S55/06X8MMSTC Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers.
Feed rates range from 5- 10m/min of 18000 - 24000 RPM.
Ideal for hardwoods and abrasive material.
Fine finish.
Up-cut prevents burning in plu...
|
| TREND S55/08X8MMSTC ALUMINIUM SPIRAL UPCUT 8MMX 20MM |
Product Code: S55/08X8MMSTC Two flute helical cutters suitable for non-ferous metals with long shank, fine finish & up-cut.
Cutter are designed to plunge and machine or mill lateral slots.
All aluminium tooling should be used with a coolant, wax stick or lubricant.
Material ...
|
| TREND S55/10X1/4STC ALUMINIUM SPIRAL UPCUT 6.3MMX20MM |
Product Code: S55/10X1/4STC Two flute helical cutters suitable for non-ferous metals with long shank, fine finish & up-cut.
Cutter are designed to plunge and machine or mill lateral slots.
All aluminium tooling should be used with a coolant, wax stick or lubricant.
Material ...
|
| TREND S55/22X1/4STC S/E SPIRAL 6.3X15.9 UPCUT ALLOY |
Product Code: S55/22X1/4STC Special high grade sub-micrograin carbide with very high tolerance grinding for smooth clean cut in aluminium.
Single O flute design for fast cutting. Increased feed rates allowing for more linear metres in less time.
Super high polished cutting edge...
|
| TREND S55/2LHX14STC SPIRAL 6.35MM DIA X 25MM DWNCUT |
Product Code: S55/2LHX14STC Trend 6.35mm diameter down cut spiral cutter - 8mm shank, 25.4mm cut length.
Spiral downcutting configuration offers the cleanest finish on the top surface of the workpiece when used in hand held or overhead CNC routing applications.
Two flute design...
|
| TREND S55/2X1/4STC SPIRAL 6.35MM DIA X 25MM CUT |
Product Code: S55/2X1/4STC Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers.
Feed rates range from 5- 10m/min of 18000 - 24000 RPM.
Ideal for hardwoods and abrasive material.
Fine finish.
Up-cut prevents burning in plu...
|
| TREND S55/3LHX12STC SPIRAL 9.5MM DIA X 32MM CUT DWNCUT |
Product Code: S55/3LHX12STC Down-cut spirals are ideal for routing small workpieces or for holding workpieces secure in vacuum jigs.
Down-cut pushes woodchips below the work.
Two flute.
Dimensions:
D=3/8 inch
D=9.5 mm
C=31.8 mm
OL=76 mm
Shank Diameter=1/2 inch
Shank Diamete...
|
| TREND S55/3X1/2STC SPIRAL 9.5MM DIA X 32MM CUT |
Product Code: S55/3X1/2STC Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers.
Feed rates range from 5- 10m/min of 18000 - 24000 RPM.
Ideal for hardwoods and abrasive material.
Fine finish.
Up-cut prevents burning in plu...
|
| TREND S55/4X1/2STC SPIRAL 12.7MM DIA X 32MM CUT |
Product Code: S55/4X1/2STC Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers.
Feed rates range from 5- 10m/min of 18000 - 24000 RPM.
Ideal for hardwoods and abrasive material.
Fine finish.
Up-cut prevents burning in plu...
|
| TREND S55/5LHX1/2STC SPIRAL 12.7MM DIA X 38MM DOWNCUT |
Product Code: S55/5LHX1/2STC Down-cut spirals are ideal for routing small workpieces or for holding workpieces secure in vacuum jigs.
Down-cut pushes woodchips below the work.
Two flute.
Dimensions:
D=1/2 inch
D=12.7 mm
C=38 mm
OL=89 mm
Shank Diameter=1/2 inch
Shank Diameter...
|
| TREND S55/5X1/2STC SPIRAL 12.7MM DIA X 38MM UPCUT |
Product Code: S55/5X1/2STC Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers.
Feed rates range from 5- 10m/min of 18000 - 24000 RPM.
Ideal for hardwoods and abrasive material.
Fine finish.
Up-cut prevents burning in plu...
|
| TREND S55/6LHX1/2STC SPIRAL 12.7MM DIA X 50MM DOWNCUT |
Product Code: S55/6LHX1/2STC Down-cut spirals are ideal for routing small workpieces or for holding workpieces secure in vacuum jigs.
Down-cut pushes woodchips below the work.
Two flute.
Dimensions:
D=1/2 inch
D=12.7 mm
C=50.8 mm
OL=101 mm
Shank Diameter=1/2 inch
Shank Diame...
|
| TREND S55/6X1/2STC SPIRAL 12.7MM DIA X 50MM UPCUT |
Product Code: S55/6X1/2STC Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers.
Feed rates range from 5- 10m/min of 18000 - 24000 RPM.
Ideal for hardwoods and abrasive material.
Fine finish.
Up-cut prevents burning in plu...
|
| TREND S57/01X1/4STC SPIRAL 6.35MM DIAX 19MM UP-DOWN CUT |
Product Code: S57/01X1/4STC Fine finish on both sides of solid timber.
Ideal for edge trimming.
For use on 16mm boards.
Single fluted compression spirals.
Dimensions:
D=1/4 inch
D=6.35 mm
C=3/4 inch
C=19 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 1/4...
|
| TREND S58/1LHX3MMSTC MINI SPIRAL 1.5MM DIA X5MM DOWNCUT |
Product Code: S58/1LHX3MMSTC Range of small diameter shank cutters for CNC routers.
Used for specialised applications including signmaking & PRB machining.
Down-cut prevents feathered edges.
Two flute.
Dimensions:
D=1.5 mm
C=16/64 inch
C=5 mm
OL=38 mm
Shank Diameter=3 mm
S...
|
| TREND S58/1X3MMSTC MINI SPIRAL 1.5MM DIA X5MM UPCUT |
Product Code: S58/1X3MMSTC Range of small diameter shank cutters for CNC routers.
Used for specialised applications including signmaking & PRB machining.
Up-cut prevents burning in plunge cuts.
Two flute.
Dimensions:
D=1.5 mm
C=5 mm
OL=38 mm
Shank Diameter=3 mm
Shank Dia...
|
| TREND S58/2LHX3MMSTC MINI SPIRAL 2MM DIA X 6MM DOWNCUT |
Product Code: S58/2LHX3MMSTC Range of small diameter shank cutters for CNC routers.
Used for specialised applications including signmaking & PRB machining.
Down-cut prevents feathered edges.
Two flute.
Dimensions:
D=5/64 inch
D=2 mm
C=15/64 inch
C=6 mm
OL=38 mm
Shank Diamet...
|
| TREND S58/2X3MMSTC MINI SPIRAL 2MM DIA X 6MM UPCUT |
Product Code: S58/2X3MMSTC Range of small diameter shank cutters for CNC routers.
Used for specialised applications including signmaking & PRB machining.
Up-cut prevents burning in plunge cuts.
Two flute.
Dimensions:
D=2 mm
C=6 mm
OL=38 mm
Shank Diameter=3 mm
Shank Diame...
|
| TREND S58/4LHX3MMSTC MINI SPIRAL 3.0MM DIA X 12MM DOWNCU |
Product Code: S58/4LHX3MMSTC Range of small diameter shank cutters for CNC routers.
Used for specialised applications including signmaking & PRB machining.
Down-cut prevents feathered edges.
Two flute.
Dimensions:
D=3 mm
C=15/32 inch
C=12 mm
OL=38 mm
Shank Diameter=3 mm
Sh...
|
|
|
Basket 0 items - £0.00
