|
|
Trend |
| TREND C242X1/2TC STAIR TRENCHING 95 DEG X 19MM DIA |
Product Code: C242X1/2TC Purpose made for stair housing jigs.
Ensures tight fit of tread in string.
Dimensions:
D1=3/4 inch
D1=19 mm
C=25.5 mm
OL=65 mm
A=95 degrees
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Imperial: 3/4
Diameter Metric: 19
Cut Length Metr...
|
| TREND C243X1/2TC STAIR TRENCHING 95 DEG X 22MM DIA |
Product Code: C243X1/2TC Purpose made for stair housing jigs.
Ensures tight fit of tread in string.
Dimensions:
D=7/8 inch
D=22 mm
C=26 mm
OL=65 mm
A=95 degrees
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Imperial: 7/8
Diameter Metric: 22
Cut Length Metric: ...
|
| TREND C250X1/2TC ROUTER MACHINE BIT 35MM DIA HINGE |
Product Code: C250X1/2TC These specially designed machine bits have a specially designed form of scriber to allow use at high speeds. For recessing circular hinges. For accurate repetitive routing, a template and guide bush fitted to the router base should be used.
Dimens...
|
| TREND C255X1/2TC MATCHLINING SET 1/2 X 6MM TONGUE |
Product Code: C255X1/2TC A complete cutter set for producing matchlining.
Jointing parts are interchanged on the arbor to change the mode of the cutter.
Set Ref. C255 can be converted to Ref. 256, and vice-versa, by purchasing the respective groover.
Dimensions:
D=47 mm
C=...
|
| TREND C256X1/2TC MATCHLINING SET 1/2 X 4MM TONGUE |
Product Code: C256X1/2TC A complete cutter set for producing matchlining.
Jointing parts are interchanged on the arbor to change the mode of the cutter.
Set Ref. C255 can be converted to Ref. C256, and vice-versa, by purchasing the respective groover.
Dimensions:
D2=34 mm
...
|
| TREND C260X1/2TC TRADITIONAL TORUS 13.5MM RAD |
Product Code: C260X1/2TC Classic skirting board mould.
Dimensions:
D=37 mm
C=40 mm
B=16 mm
R=13.5 mm
OL=88.5 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Metric: 37
Cut Length Metric: 40
Overall Length Metric: 88.5
Bearing Diameter Metric: 16...
|
| TREND C265X1/4TC B/GUIDED GLAZING BAR 10MM RAD |
Product Code: C265X1/4TC The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded.
Dimensions:
D=28 mm
C=19 mm
B=12.7 mm
R=10 mm
OL=70.5 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 28
Cut Length Metr...
|
| TREND C266X1/2TC B/GUIDED GLAZING BAR 17MM RAD |
Product Code: C266X1/2TC The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded.
Dimensions:
D=27 mm
C=17 mm
C2=13 mm
B=9.5 mm
R=17 mm
OL=65 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Metric: 27
Cut Leng...
|
| TREND C266X1/4TC B/GUIDED GLAZING BAR 17MM RAD |
Product Code: C266X1/4TC The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded.
Dimensions:
D=27 mm
C=17 mm
B=9.5 mm
R=17 mm
OL=66.5 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 27
Cut Length Metri...
|
| TREND C270X1/4TC SASH BAR OVOLO JOINT 10MM RAD |
Product Code: C270X1/4TC Designed for sash bar window construction.
Dimensions:
D=25 mm
C=20 mm
R=10 mm
OL=60 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 25
Cut Length Metric: 20
Overall Length Metric: 60...
|
| TREND C271X1/2TC SASH BAR OVOLO JOINT 17MM RAD |
Product Code: C271X1/2TC Enables curved frames to be moulded.
Dimensions:
D=28.5 mm
C=20 mm
R=17 mm
OL=58.5 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Metric: 28.5
Cut Length Metric: 20
Overall Length Metric: 58.5...
|
| TREND C272X1/4TC SHOULDER SCRIBE 9MM RAD |
Product Code: C272X1/4TC For door and window construction, decorative panelling and many other joinery applications.
Designed for 35mm and 44mm timber thicknesses.
Dimensions:
D=36.7 mm
C=9 mm
B=12.7 mm
R=9 mm
OL=52 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diamete...
|
| TREND C273X1/4TC SHOULDER SCRIBE 17MM RAD |
Product Code: C273X1/4TC For door and window construction, decorative panelling and many other joinery applications.
Designed for 44mm timber thicknesses.
Dimensions:
D=31 mm
C=13 mm
B=12.7 mm
R=17 mm
OL=56 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric:...
|
| TREND C306X1/2TC FLAT BOTTOM DRAINING GROOVE CUTTER |
Product Code: C306X1/2TC A gently radiused, flat-bottomed cutter for producing sleek modern draining grooves with effective water disposal. Especially suited to compact laminate worktops.
Gentle 2.5mm Radius produces flat bottomed draining grooves for sleek aesthetics and ef...
|
| TREND CAB/JIG/A CABINET HARDWARE DRILLING JIG |
Product Code: CAB/JIG/A A versatile drilling/marking jig that assists in the accurate and repetitive installation of cabinetry handles and knobs on a wide variety of door and drawer fronts.
Self-Centering Scales with both imperial and metric options, remove the need for mea...
|
| TREND CAB/JIG/B 35MM CONCEALED HINGE JIG |
Product Code: CAB/JIG/B A precision drilling jig for installing concealed cabinet (Ôeuro-styleÕ) hinges accurately and quickly. Features tool-free inset positioning for rapid setup and pilot hole guides to ensure perfect hinge alignment. For use with a standard Combi Drill....
|
| TREND CASE/1001 CARRY CASE COMBI1001 & 1002 |
Product Code: CASE/1001 Hard wearing carry cases to protect and allow for ease of carrying of the Trend COMBI1001, COMBI1002, KWJ700, KWJ900 & HR/JIG
Hand carry strap.
Tool not included.
Dimensions:
Length outside=1250 mm
Height outside=415 mm...
|
| TREND CASE/DAR/200 CARRY CASE DAR/200 |
Product Code: CASE/DAR/200 Hard wearing carry case for the DAR/200 digital angle rule.
Belt loop, hanging loop/carry strap with quick release buckle.
Spare battery pocket.
Pen/pencil elasticated loops.
Contents not included.
Dimensions:
Size closed=242 mm x 70 mm
Material=Pol...
|
| TREND CASE/DLB CARRY CASE DLB |
Product Code: CASE/DLB Carry case for the DLB digital level box.
Belt loop.
Contents not included.
Dimensions:
Size closed=72 mm x 72 mm x 30 mm...
|
| TREND CASE/HJ/A FABRIC CARRY CASE FOR H/JIG/A |
Product Code: CASE/HJ/A Fabric case for the H/JIG/A hinge jig.
Adjustable shoulder strap.
Padded with inside accessory pocket.
Hook and loop flap closure.
Hand carry strap.
Contents not included.
Dimensions:
Length outside=1250 mm
Material=420D PVC-Nylon
Liner material=Spo...
|
| TREND CASE/T10 CARRY CASE T10 ROUTER |
Product Code: CASE/T10 Storage case for safely transporting and storing T10 & T11 router.
Ideal for storage of a router on-site or in the workshop.
Contents not included.
Dimensions:
Size=390 mm x 295 mm x 240 mm...
|
| TREND CB/KIT COLLET BRUSH KIT 4 BRUSH SIZES |
Product Code: CB/KIT Pack of four brushes, used to remove deposits of resin, dust and corrosion from the inside of collets.
Made from brass to prevent score damage.
Brush diameters 1/4 inch, 8mm, 3/8 inch and 1/2 inch.
Dimensions:
1/4 inch
8 mm
3/8 inch
1/2 inch...
|
| TREND CB12-14TC COUNTERBORE 1/4 DIA X 1/2 DC/S |
Product Code: CB12-14TC The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, particle boards and plastics (abrasive). Use a drill...
|
| TREND CB12-316TC COUNTERBORE 3/16 DIA X 1/2 DC/S |
Product Code: CB12-316TC The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, particle boards and plastics (abrasive). Use a drill...
|
| TREND CB34-14TC COUNTERBORE 1/4 DIA X 3/4 DC/S |
Product Code: CB34-14TC The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, particle boards and plastics (abrasive). Use a drill...
|
| TREND CB38-316TC COUNTERBORE 3/16 DIA X 3/8 DC/S |
Product Code: CB38-316TC The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, particle boards and plastics (abrasive). Use a drill...
|
|
|
Basket 0 items - £0.00
