|
|
Trend |
| TREND 11/2X1/4TC V GROOVE 45 DEG X 9.5MM DIA |
Product Code: 11/2X1/4TC Use for bevelling, chamfering and for producing mortar grooves.
Approximately 1.0mm flat will be found on the nose.
Dimensions:
D=11 mm
C=5.0 mm
C2=7.7 mm
OL=52.5 mm
A=45 degrees
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 11
...
|
| TREND 11/30X1/2TC CHAMFER V GROOVE A=45* X 25.4MM |
Product Code: 11/30X1/2TC Use for bevelling, chamfering and for producing mortar grooves.
Approximately 1.0mm flat will be found on the nose.
Dimensions:
D=27.5 mm
C=13 mm
C2=18.38 mm
A=45 degrees
OL=59 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Imperial: 1
...
|
| TREND 11/30X1/4TC CHAMFER V GROOVE A=45¡ X 25.4MM |
Product Code: 11/30X1/4TC Use for bevelling, chamfering and for producing mortar grooves.
Approximately 1.0mm flat will be found on the nose.
Dimensions:
D=27.5 mm
C=13 mm
C2=18.38 mm
A=45 degrees
OL=59 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 1
...
|
| TREND 11/31X1/2TC V GROOVE 45 DEG X 12.7MM DIA |
Product Code: 11/31X1/2TC Use for bevelling, chamfering and for producing mortar grooves.
Approximately 1.0mm flat will be found on the nose.
Dimensions:
D=12.7 mm
C=6.5 mm
C2=9 mm
OL=54 mm
A=45 degrees
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Imperial: 1/2
...
|
| TREND 11/31X1/4TC V GROOVE 45 DEG X 12.7MM DIA |
Product Code: 11/31X1/4TC Use for bevelling, chamfering and for producing mortar grooves.
Approximately 1.0mm flat will be found on the nose.
Dimensions:
D=12.7 mm
C=6.5 mm
C2=9 mm
OL=52.7 mm
A=45 degrees
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Imperial: 1/...
|
| TREND 11/32X1/2TC V GROOVE 45 DEG X 16MM DIA |
Product Code: 11/32X1/2TC Use for bevelling, chamfering and for producing mortar grooves.
Approximately 1.0mm flat will be found on the nose.
Dimensions:
D=17.5 mm
C=8 mm
C2=11.31 mm
OL=52.7 mm
A=45 degrees
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Metric: 17...
|
| TREND 11/32X1/4TC V GROOVE 45 DEG X 16MM DIA |
Product Code: 11/32X1/4TC Use for bevelling, chamfering and for producing mortar grooves.
Approximately 1.0mm flat will be found on the nose.
Dimensions:
D=17.5 mm
C=8 mm
C2=11.31 mm
OL=52.7 mm
A=45 degrees
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 17...
|
| TREND 11/3X1/2TC CHAMFER CUTTER 45DEG X19.1MM DIA |
Product Code: 11/3X1/2TC Use for bevelling, chamfering and for producing mortar grooves.
Approximately 1.0mm flat will be found on the nose.
Is ideal for imitating 'V' jointed tongue and groove on man-made board.
Dimensions:
D=3/4 inch
D=19.4 mm
C=9.2 mm
C2=13 mm
A=45 deg...
|
| TREND 11/3X1/4TC CHAMFER V GROOVE 8MM 253349 |
Product Code: 11/3X1/4TC Use for bevelling, chamfering and for producing mortar grooves.
Approximately 1.0mm flat will be found on the nose.
Is ideal for imitating 'V' jointed tongue and groove on man-made board.
Dimensions:
D=3/4 inch
D=19.4 mm
C=9.2 mm
C2=13 mm
OL=56 mm...
|
| TREND 11/3X8MMTC CHAMFER 'V' GROOVE A=45 |
Product Code: 11/3X8MMTC Use for bevelling, chamfering and for producing mortar grooves.
Approximately 1.0mm flat will be found on the nose.
Is ideal for imitating 'V' jointed tongue and groove on man-made board.
Dimensions:
D=3/4 inch
D=19.4 mm
C=9.2 mm
C2=13 mm
A=45 deg...
|
| TREND 11/40X1/4TC PANEL MOULD A=45 |
Product Code: 11/40X1/4TC Template thickness should be at least 5mm thicker than cutter cut length of cutter.
Approximately 1.0mm flat will be found on the nose.
Dimensions:
D=1/2 inch
D=12.7 mm
C=12.7 mm
B=12.7 mm
A=45 degrees
OL=63.31 mm
Shank Diameter=1/4 inch
Shank Dia...
|
| TREND 11/50X1/4TC PANEL MOULD 4.0 RADX13MM DIA 257109 |
Product Code: 11/50X1/4TC Ideal for edge of drawer fronts and cabinet doors.
Dimensions:
D=13 mm
D2=1.2 mm
C=12 mm
R=4 mm
OL=52 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 13
Diameter 2 Metric: 1.2
Cut Length Metric: 12
Overall Length Metric: 52...
|
| TREND 11/5X1/4TC CHAMFER 'V' GROOVE A=60¡ 257084 |
Product Code: 11/5X1/4TC Use for bevelling, chamfering and for producing mortar grooves.
Approximately 1.0mm flat will be found on the nose.
Dimensions:
D=1/2 inch
D=12.7 mm
C=10.3 mm
C2=11.9 mm
A=60 degrees
OL=44.5 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diamete...
|
| TREND 11/60X1/2TC BEVEL 32MM DIA X 25MM CUT |
Product Code: 11/60X1/2TC Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens.
Designed to trim surface to an undermount bowl.
Dimensions:
D=32 mm
C=25 mm
B=21.8 mm
A=78 degrees
OL=76.87...
|
| TREND 12/03X1/4TC RADIUS CUTTER 1.6MM RAD |
Product Code: 12/03X1/4TC For coves and part of a rule joint.
Dimensions:
D=1/8 inch
D=3.2 mm
C=9.5 mm
R=1/16 inch
R=1.6 mm
OL=45 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 1/8
Diameter Metric: 3.2
Cut Length Imperial: 3/8
Cut Length Metric: 9.5
...
|
| TREND 12/05X1/4TC RADIUS CUTTER 2.4MM RAD X 11MM CUT |
Product Code: 12/05X1/4TC For coves and part of a rule joint.
Dimensions:
D=4.8 mm
C=7/16 inch
C=11 mm
R=3/32 inch
R=2.4 mm
OL=60 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 4.8
Cut Length Metric: 11
Overall Length Metric: 60...
|
| TREND 12/31X1/4TC RADIUS CUTTER 3.2MM RAD X 11MM CUT |
Product Code: 12/31X1/4TC For coves and part of a rule joint.
Dimensions:
D=6.4 mm
C=7/16 inch
C=11.0 mm
R=1/8 inch
R=3.2 mm
OL=60.5 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 6.4
Cut Length Metric: 11.0
Overall Length Metric: 60.5...
|
| TREND 12/3X1/4TC RADIUS CUTTER 3MM RAD 257090 |
Product Code: 12/3X1/4TC For coves and part of a rule joint.
Dimensions:
D=6 mm
C=15 mm
R=3 mm
OL=58.5 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 6
Cut Length Metric: 15
Overall Length Metric: 58.5...
|
| TREND 12/4X1/4TC RADIUS CUTTER 4.0MM RAD X 12.7MM C |
Product Code: 12/4X1/4TC For coves and part of a rule joint.
Dimensions:
D=8 mm
C=1/2 inch
C=12.7 mm
R=4 mm
OL=56.7 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 8
Cut Length Imperial: 1/2
Cut Length Metric: 12.7
Overall Length Metric: 56.7...
|
| TREND 12/5X1/4TC RADIUS 5MM RAD & 18MM CUT 253350 |
Product Code: 12/5X1/4TC For coves and part of a rule joint.
Dimensions:
D=10 mm
C=18 mm
R=5 mm
OL=58 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 10
Cut Length Metric: 18
Overall Length Metric: 58...
|
| TREND 12/6X1/2TC RADIUS 6.3MM RAD X 19MM CUT |
Product Code: 12/6X1/2TC For coves and part of a rule joint.
Dimensions:
D=12.7 mm
C=19 mm
R=1/4 inch
R=6.3 mm
OL=56 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Imperial: 1/2
Diameter Metric: 12.7
Cut Length Metric: 19
Overall Length Metric: 56...
|
| TREND 12/6X1/4TC RADIUS 6.3MM RAD X 19MM CUT 257091 |
Product Code: 12/6X1/4TC For coves and part of a rule joint.
Dimensions:
D=1/2 inch
D=12.7 mm
C=19 mm
OL=59 mm
R=1/4 inch
R=6.3 mm
OL=47 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 1/2
Diameter Metric: 12.7
Cut Length Metric: 19
Overall Length Met...
|
| TREND 12/7X1/2TC RADIUS 7MM RAD X 18MM CUT |
Product Code: 12/7X1/2TC For coves and part of a rule joint.
Dimensions:
D=14 mm
C=18 mm
R=7 mm
OL=60 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Metric: 14
Cut Length Metric: 18
Overall Length Metric: 60...
|
| TREND 13/1X1/2TC RADIUS 8MM RAD X 19.5MM CUT |
Product Code: 13/1X1/2TC For coves and part of a rule joint.
Dimensions:
D=16 mm
C=19.5 mm
R=5/16 inch
R=8 mm
OL=57.5 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Metric: 16
Cut Length Metric: 19.5
Overall Length Metric: 57.5...
|
| TREND 13/1X1/4TC RADIUS 8MM RAD & 16MM DIA 257092 |
Product Code: 13/1X1/4TC For coves and part of a rule joint.
Dimensions:
D=16 mm
C=19.5 mm
R=5/16 inch
R=8 mm
OL=51 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 16
Cut Length Metric: 19.5
Overall Length Metric: 51...
|
| TREND 13/20X1/2TC COVE 9.5MM RAD X 19.1MM DIA |
Product Code: 13/20X1/2TC For coves and part of a rule joint.
Dimensions:
D=19.1 mm
C=31.7 mm
R=3/8 inch
R=9.5 mm
OL=71 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Imperial: 3/4
Diameter Metric: 19.1
Cut Length Metric: 31.7
Overall Length Metric: 71...
|
|
|
Basket 0 items - £0.00
