|
|
Trend |
| TREND TR09X1/4TC TWO FLUTE 10MM DIA X 19MM CUT |
Product Code: TR09X1/4TC Trend Trade Straight Cutter - 10mm diameter
10mm diameter for rebating and grooving applications.
1/4in shank ideal for smaller routers allowing easy hand held control with guidebushes and side fences.
PTFE coating on the bodies minimises heat and...
|
| TREND TR09X12MMTC TWO FLUTE 10MM DIA X 19MM CUT |
Product Code: TR09X12MMTC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR09X8MMTC TWO FLUTE 10MM DIA X 19MM CUT |
Product Code: TR09X8MMTC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR10X1/2TC TWO FLUTE 10MM DIA X 35MM CUT |
Product Code: TR10X1/2TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR11X1/4TC TWO FLUTE 12MM DIA X 19MM CUT |
Product Code: TR11X1/4TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR12X1/4TC TWO FLUTE 12MM X 19MM EX LONG C/T |
Product Code: TR12X1/4TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR12X8MMTC TWO FLUTE 12MM X 19MM EX LONG C/T |
Product Code: TR12X8MMTC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR13X1/4TC TWO FLUTE 12.7MM DIA X 19MM CUT |
Product Code: TR13X1/4TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR14X1/2TC TWO FLUTE 12.7MM DIA X 25MM CUT |
Product Code: TR14X1/2TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR14X1/4TC TWO FLUTE 12.7MM DIA X 25MM CUT |
Product Code: TR14X1/4TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR14X8MMTC TWO FLUTE 12.7MM DIA X 25MM CUT |
Product Code: TR14X8MMTC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR16X1/2TC TWO FLUTE 12.7MM DIA X 38MM CUT |
Product Code: TR16X1/2TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR17DX1/2TC TWO FLUTE 12.7MMX50MM CUT WITH C/T |
Product Code: TR17DX1/2TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR17DX12MMTC TWO FLUTE 12.7MMX50MM CUT WITH C/T |
Product Code: TR17DX12MMTC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR17MX1/2TC TWO FLUTE 12.7 DIA X 50MM CUT X83MM |
Product Code: TR17MX1/2TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR17X1/2TC TWO FLUTE 12.7 DIA X 50MM CUT |
Product Code: TR17X1/2TC Trend Trade Cutter for Worktop Joints - 1/2in diameter 50mm cut length
1/2in diameter cutter for kitchen worktop jointing, cutting the joints and bolt recesses.
High quality micro-granular tungsten carbide cutting edges for maximum performance and d...
|
| TREND TR17X12MMTC TWO FLUTE 12.7 DIA X 50MM CUT |
Product Code: TR17X12MMTC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR18DX1/2TC TWO FLUTE 12.7MM DIA X 63MM C/T |
Product Code: TR18DX1/2TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR18X1/2TC TWO FLUTE 12.7MM DIA X 63MM CUT |
Product Code: TR18X1/2TC Trend Trade Cutter for Worktop Joints - 1/2in diameter 63mm cut length
1/2in diameter cutter for kitchen worktop jointing, cutting the joints and bolt recesses.
Extra long cutter for making the worktop joints on deeper 50mm thick worktops.
PTFE coa...
|
| TREND TR18X12MMTC TWO FLUTE 12.7MM DIA X 63MM CUT |
Product Code: TR18X12MMTC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR19X1/4TC TWO FLUTE 15.9MM X 19MM CUT |
Product Code: TR19X1/4TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR19X8MMTC TWO FLUTE 15.9MM X 19MM CUT |
Product Code: TR19X8MMTC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR20DX1/2TC TWO FLUTE 20MM DIA X 20MM CUT |
Product Code: TR20DX1/2TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR20DX1/4TC TWO FLUTE 20MM DIA X 20MM CUT |
Product Code: TR20DX1/4TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR20X1/4TC TWO FLUTE 19.1MM DIA X 25MM CUT |
Product Code: TR20X1/4TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR20X8MMTC TWO FLUTE 19.1MM DIA X 25MM CUT |
Product Code: TR20X8MMTC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
|
|
Basket 0 items - £0.00
