Trend

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Dimensions: D=1 1/32 inch D=26 mm D2=22 mm C=5/8 inch C=16 mm B=15.9 mm R=4.8 mm OL=70.5 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imp...

Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Dimensions: D=22 mm C=25/64 inch C=10 mm B=22 mm R=2.4 mm OL=61.5 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Met...

Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Dimensions: D=22 mm C=25/64 inch C=10 mm B=22 mm R=2.4 mm OL=61 mm Shank Diameter=8 mm Shank Diameter: 8 mm Diameter Metric: ...

This 'roughing' trimmer, leaves an overhang of 3mm, for secondary final trim. Dimensions: D=1/2 inch D=12.7 mm C=1 inch C=25.4 mm B=19.1 mm E=3.2 mm A=90 degrees OL=81.5 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperial: 1/2 Diamet...

Three flute self-guiding for extra fine trimming of laminate or plywood overlay. Dimensions: D=1/2 inch D=12.7 mm C=1/2 inch C=12.7 mm B=12.7 mm A=90 degrees OL=67 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperial: 1/2 Diameter Met...

Cuts out apertures in laminate worktops. The nose of the cutter acts as a guide follower. Dimensions: D=1/4 inch D=6.3 mm C=45/64 inch C=18 mm OL=77 mm Shank Diameter=8 mm Shank Diameter: 8 mm Diameter Imperial: 1/4 Diameter Metric: 6.3 Cut Le...

Ideal for posts and newel caps for stairs. Dimensions: D1=34.9 mm C=20.6 mm B=12.7 mm A=60 degrees OL=74.5 mm Shank Diameter=1/4 inches Shank Diameter: 1/4 Diameter Metric: 34.9 Cut Length Metric: 20.6 Overall Length Metric: 74.5 Bearing Diamet...

Ideal for posts and newel caps for stairs. Dimensions: D1=30.9 mm C=22 mm B=12.7 mm A=67.5 degrees OL=74.5 mm Shank Diameter=1/4 inches Shank Diameter: 1/4 Diameter Metric: 30.9 Cut Length Metric: 22.2 Overall Length Metric: 74.5 Bearing Diamet...

Ideal for posts and newel caps for stairs. Dimensions: D1=25.4 mm C=1/2 inches C=12.7 mm B=9.5 mm A=60 degrees OL=64 mm Shank Diameter=1/4 inches Shank Diameter: 1/4 Diameter Imperial: 1 Diameter Metric: 25.4 Cut Length Imperial: 1/2 Cut Length...

Ideal for posts and newel caps for stairs. Dimensions: D1=35.1 mm C=9/32 inches C=7 mm B=9.5 mm A=30 degrees Shank Diameter=1/4 inches Shank Diameter=1/4 OL=61.5 mm Shank Diameter: 1/4 Diameter Metric: 35.1 Cut Length Imperial: 9/32 Cut Length M...

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Dimensions: D=7/8 inch D=22.3 mm D2=20 mm C=35/64 inch C=14 mm B=12.7 mm R=3.2 mm OL=65.5 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imp...

For decorative panel and veining work. Ideal for carving with the Routerlathe. Dimensions: D=3/8 inch D=9.5 mm C=7.5 mm R=4.8 mm OL=47.5 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperial: 3/8 Diameter Metric: 9.5 Cut Length Metri...

For panel and veining work. Ideal for barley twists using the Routerlathe. Dimensions: D=1 1/16 inch D=27 mm C=5/8 inch C=16 mm R=7.5 mm OL=56 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperial: 1 1/16 Diameter Metric: 27 Cut Lengt...

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with every cutter giving a 9.5mm groove depth. Depth of cut can be changed by purchasing alternative beari...

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with every cutter giving a 9.5mm groove depth. Depth of cut can be changed by purchasing alternative beari...

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with every cutter giving a 9.5mm groove depth. Depth of cut can be changed by purchasing alternative beari...

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with every cutter giving a 9.5mm groove depth. Depth of cut can be changed by purchasing alternative beari...

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with every cutter giving a 9.5mm groove depth. Depth of cut can be changed by purchasing alternative beari...

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with every cutter giving a 9.5mm groove depth. Depth of cut can be changed by purchasing alternative beari...

Trend Craft Pro 1/4in shank bearing guided slotting cutter - 31.8mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. The fast, easy and accura...

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with every cutter giving a 9.5mm groove depth. Depth of cut can be changed by purchasing alternative beari...

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with every cutter giving a 9.5mm groove depth. Depth of cut can be changed by purchasing alternative beari...

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with every cutter giving a 9.5mm groove depth. Depth of cut can be changed by purchasing alternative beari...

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe. Cuts both parts of the joint b...

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe. Cuts both parts of the joint b...

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take several passes, increasing the depth with each pas...