|
|
Trend |
| TREND 4/07X1/4TC TWO FLUTE 22.2MM DIA X 19MM 257039 |
Product Code: 4/07X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=7/8 inch
D=22.2 mm
C=19 mm
OL=51 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 4/08X1/2TC TWO FLUTE 25.4MM DIA X 19MM CUT |
Product Code: 4/08X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=1 inch
D=25.4 mm
C=19 mm
OL=60 mm
Shank Diameter=1/2 inch
Shank Di...
|
| TREND 4/08X1/4TC TWO FLUTE 25.4MM DIA X 19MM 257040 |
Product Code: 4/08X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=1 inch
D=25.4 mm
C=19 mm
OL=51 mm
Shank Diameter=1/4 inch
Shank Di...
|
| TREND 4/09X1/2TC TWO FLUTE 15MM X 63MM |
Product Code: 4/09X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D1=15mm
Cut length=63 mm
OL=100 mm
Shank Diameter=1/2
Shank Diameter...
|
| TREND 4/0X1/2TC TWO FLUTE 13MM DIA X 26MM CUT |
Product Code: 4/0X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=33/64 inch
D=13 mm
C=26 mm
OL=72 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/0X1/4TC TWO FLUTE 13MM DIA X 26MM CUT |
Product Code: 4/0X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=33/64 inch
D=13 mm
C=26 mm
OL=57 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 4/10X1/2TC TWO FLUTE 35MM DIA X 25MM CUT |
Product Code: 4/10X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=1 3/8 inch
D=35 mm
C=25 mm
OL=67 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/12X1/2TC TWO FLUTE 38MM DIA X 25MM CUT |
Product Code: 4/12X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=1 1/2 inch
D=38.1 mm
C=25 mm
OL=66 mm
Shank Diameter=1/2 inch
Shan...
|
| TREND 4/15X1/2TC TWO FLUTE 50.8MM DIA X 25MM CUT |
Product Code: 4/15X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=2 inches
D=50.8 mm
C=25 mm
OL=66 mm
Shank Diameter=1/2 inch
For sta...
|
| TREND 4/1X1/2TC TWO FLUTE 15MM DIA X 25MM CUT |
Product Code: 4/1X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=19/32 inch
D=15 mm
C=25 mm
OL=67 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/1X1/4TC TWO FLUTE 15MM DIA X 25MM 257035 |
Product Code: 4/1X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=19/32 inch
D=15 mm
C=25 mm
OL=65 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 4/20X1/2TC TWO FLUTE 16MM DIA X 28MM 257050 |
Product Code: 4/20X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=5/8 inch
D=15.9 mm
C=32 mm
OL=74 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/21X1/2TC TWO FLUTE 16MM DIA X 37MM CUT |
Product Code: 4/21X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=5/8 inch
D=15.9 mm
C=37 mm
OL=79 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/22X1/2TC TWO FLUTE 15.9MM DIA X50MM 257051 |
Product Code: 4/22X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=5/8 inch
D=15.9 mm
C=50 mm
OL=96 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/24X1/2TC TWO FLUTE 16MM DIA X 63MM CUT |
Product Code: 4/24X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=5/8 inch
D=15.9 mm
C=63 mm
OL=105 mm
Shank Diameter=1/2 inch
Shank...
|
| TREND 4/25X1/2TC TWO FLUTE 17MM DIA X 25MM CUT |
Product Code: 4/25X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=43/64 inch
D=17 mm
C=25 mm
OL=65 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/25X1/4TC TWO FLUTE 17MM DIA X 25MM CUT |
Product Code: 4/25X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=43/64 inch
D=17 mm
C=25 mm
OL=54 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 4/26X1/2TC TWO FLUTE 15.9MM DIA X 25MM CUT |
Product Code: 4/26X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=5/8 inch
D=15.9 mm
C=25 mm
OL=66 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/26X1/4TC TWO FLUTE 15.9MM DIA X 25.4MM |
Product Code: 4/26X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=5/8 inch
D=15.9 mm
C=25 mm
OL=57 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 4/27X1/2TC TWO FLUTE 16MM DIA X 25MM CUT |
Product Code: 4/27X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D1=16 mm
C=25 mm
OL=67 mm
Shank Diameter=1/2
Shank Diameter: 1/2
Di...
|
| TREND 4/28X1/2TC TWO FLUTE 16MM DIA X 35MM CUT |
Product Code: 4/28X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D1=16 mm
C=35 mm
OL=67 mm
Shank Diameter=1/2
Shank Diameter: 1/2
Di...
|
| TREND 4/29X1/2TC TWO FLUTE 18MM DIA X 25MM CUT |
Product Code: 4/29X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=45/64 inch
D=18 mm
C=25 mm
OL=67 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 4/29X1/4TC TWO FLUTE 18MM DIA X 25MM 257036 |
Product Code: 4/29X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=45/64 inch
D=18 mm
C=25 mm
OL=57 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 4/2X1/2TC TWO FLUTE 16MM DIA X 19MM CUT |
Product Code: 4/2X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=5/8 inch
D=16 mm
C=19 mm
OL=60 mm
Shank Diameter=1/2 inch
Shank Di...
|
| TREND 4/2X1/4TC TWO FLUTE 16MM DIA X 19MM 253339 |
Product Code: 4/2X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=5/8 inch
D=16 mm
C=19 mm
OL=52 mm
Shank Diameter=1/4 inch
Shank Di...
|
| TREND 4/30X1/2TC TWO FLUTE 18MM DIA X 50MM 257052 |
Product Code: 4/30X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=45/64 inch
D=18 mm
C=50 mm
OL=92 mm
Shank Diameter=1/2 inch
Shank ...
|
|
|
Basket 0 items - £0.00
