|
|
Trend |
| TREND C173X1/2TC LARGE PANEL RAISER R12MM |
Product Code: C173X1/2TC Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF.
For use in a router table only.
Take several passes, increasing the depth with each pas...
|
| TREND C174X1/4TC DOWEL DRILL 5MM X 35MM CUT |
Product Code: C174X1/4TC Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template.
Ref. C174 can be used with the Trend Shelf Support Template.
For drilling machines or routers.
Dimensions:
D=5 mm
C=35 mm
OL=57 mm
Shank Diameter=1/4 inch
S...
|
| TREND C174X8MMTC DOWEL DRILL 5MM X 35MM CUT |
Product Code: C174X8MMTC Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template.
Ref. C174 can be used with the Trend Shelf Support Template.
For drilling machines or routers.
Dimensions:
D=5 mm
C=35 mm
OL=57 mm
Shank Diameter=8 mm
Shank...
|
| TREND C175X1/4TC DOWEL DRILL 6MM X 35MM CUT |
Product Code: C175X1/4TC Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template.
Ref. C174 can be used with the Trend Shelf Support Template.
For drilling machines or routers.
Dimensions:
D=6 mm
C=35 mm
OL=70 mm
Shank length=30 mm
Shank D...
|
| TREND C175X8MMTC DOWEL DRILL 6MM X 35MM CUT |
Product Code: C175X8MMTC Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template.
Can be used for 6mm dowels.
For drilling machines or routers.
Dimensions:
D=6 mm
C=35 mm
OL=70 mm
Shank length=23 mm
Shank Diameter=8 mm
Shank Diameter: 8 mm
...
|
| TREND C176X1/4TC DOWEL DRILL 8MM X 35MM CUT |
Product Code: C176X1/4TC Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template.
Can be used for 8mm dowels.
For drilling machines or routers.
Dimensions:
D=8 mm
C=35 mm
OL=70 mm
Shank length=23 mm
Shank Diameter=1/4 inch
Shank Diameter: 1...
|
| TREND C176X8MMTC DOWEL DRILL 8MM X 35MM CUT |
Product Code: C176X8MMTC Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template.
Can be used for 8mm dowels.
For drilling machines or routers.
Dimensions:
D=8 mm
C=35 mm
OL=70 mm
Shank length=23 mm
Shank Diameter=8 mm
Shank Diameter: 8 mm
...
|
| TREND C177X1/4TC DOWEL DRILL 10MM X 35MM CUT |
Product Code: C177X1/4TC Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template.
Can be used for 10mm dowels.
For drilling machines or routers.
Dimensions:
D=10 mm
C=35 mm
OL=70 mm
Shank length=30 mm
Shank Diameter=1/4 inch
Shank Diameter:...
|
| TREND C177X8MMTC DOWEL DRILL 10MM X 35MM CUT |
Product Code: C177X8MMTC Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template.
For drilling machines or routers.
Dimensions:
D=10 mm
C=35 mm
OL=70 mm
Shank length=23 mm
Shank Diameter=8 mm
Shank Diameter: 8 mm
Diameter Metric: 10
Cut L...
|
| TREND C178X1/4TC DOVETAIL 12.7MM X 98 DEG X 20MM CUT |
Product Code: C178X1/4TC These cutters are for Trend Craft Dovetail Jigs.
Dimensions:
D=12.7 mm
C=20 mm
OL=60 mm
A=98 degrees
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 1/2
Diameter Metric: 12.7
Cut Length Metric: 20
Overall Length Metric: 60
Angle...
|
| TREND C178X8MMTC DOVETAIL 12.7MM X 98 DEG X 20MM CUT |
Product Code: C178X8MMTC These cutters are for Trend Craft Dovetail Jigs.
Dimensions:
D=12.7 mm
C=20 mm
OL=60 mm
A=98 degrees
Shank Diameter=8 mm
Shank Diameter: 8 mm
Diameter Imperial: 1/2
Diameter Metric: 12.7
Cut Length Metric: 20
Overall Length Metric: 60
Angle: 9...
|
| TREND C179X1/2TC DOVETAIL 19MM X 97 DEG X 25MM CUT |
Product Code: C179X1/2TC These cutters are for Trend Craft Dovetail Jigs.
Dimensions:
D=19.1 mm
C=25 mm
OL=65 mm
A=97 degrees
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Imperial: 3/4
Diameter Metric: 19.1
Cut Length Metric: 25
Overall Length Metric: 65
Angle...
|
| TREND C179X12MMTC DOVETAIL 19MM X 97 DEG X 25MM CUT |
Product Code: C179X12MMTC These cutters are for Trend Craft Dovetail Jigs.
Dimensions:
D=19.1 mm
C=25 mm
OL=65 mm
A=97 degrees
Shank Diameter=12 mm
Shank Diameter: 12 mm
Diameter Imperial: 3/4
Diameter Metric: 19.1
Cut Length Metric: 25
Overall Length Metric: 65
Angle:...
|
| TREND C179X8MMTC DOVETAIL 19MM X 97 DEG X 25MM CUT |
Product Code: C179X8MMTC These cutters are for Trend Craft Dovetail Jigs.
Dimensions:
D=19.1 mm
C=25 mm
OL=65 mm
A=97 degrees
Shank Diameter=8 mm
Shank Diameter: 8 mm
Diameter Imperial: 3/4
Diameter Metric: 19.1
Cut Length Metric: 25
Overall Length Metric: 65
Angle: 9...
|
| TREND C180X1/4TC DOWEL DRILL 3MM X 14MM CUT |
Product Code: C180X1/4TC Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template.
For drilling machines or routers.
Dimensions:
D=3 mm
C=14 mm
OL=57 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 3
Cut Length Metric: 14
...
|
| TREND C180X8MMTC DOWEL DRILL 3MM X 14MM CUT |
Product Code: C180X8MMTC Lip and spur dowel drills for use with the Trend Craft Dovetail Jig dowelling template.
For drilling machines or routers.
Dimensions:
D=3 mm
C=14 mm
OL=57 mm
Shank Diameter=8 mm
Shank Diameter: 8 mm
Diameter Metric: 3
Cut Length Metric: 14
Ove...
|
| TREND C183X1/2TC B/GUIDED 40MM RAD P/RAISER 86MM DIA |
Product Code: C183X1/2TC Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF.
For use in a router table only.
Take several passes, increasing the depth with each pas...
|
| TREND C184X1/2TC OGEE PANEL MOULD 22MM RAD 86MM DIA |
Product Code: C184X1/2TC Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF.
For use in a router table only.
Take several passes, increasing the depth with each pas...
|
| TREND C186X1/2TC BEVEL PANEL RAISER 10 DEG 50MM DIA |
Product Code: C186X1/2TC Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF.
For use in a router table only.
Take several passes, increasing the depth with each pas...
|
| TREND C187X8MMTC BEVEL PANEL RAISER 10 DEG 41MM DIA |
Product Code: C187X8MMTC Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF.
For use in a router table only.
Take several passes, increasing the depth with each pas...
|
| TREND C188X1/2TC MITRE LOCK LARGE 15MM TO 25MM |
Product Code: C188X1/2TC Ideal for speaker cabinets and drawer construction.
Please note.
This tool cannot be re-sharpened.
Inverted use only.
Use on MDF and natural timbers.
Dimensions:
D=68 mm
C=30 mm
C2=12.5 mm
A=45 degrees
Shank Diameter=1/2 inch
OL=69.5 mm
Timber t...
|
| TREND C189X1/4TC MITRE LOCK SMALL 8MM TO 12MM |
Product Code: C189X1/4TC Ideal for speaker cabinets and drawer construction.
Please note.
This tool cannot be re-sharpened.
Inverted use only.
Use on MDF and natural timbers.
Dimensions:
D=42 mm
C=14.3
C2=4.0 mm
A=45 degrees
Shank Diameter=1/4 inch
OL=54.5 mm
Timber thi...
|
| TREND C190X1/2TC B/GUIDED THUMB MOULD RAD 44MM |
Product Code: C190X1/2TC A quarter ellipse cutter for architraves and mould finishes.
For stationary machines - 12000 RPM recommended speed.
Dimensions:
D=69.2 mm
C=16.0 mm
B=12.7 mm
R=44 mm
OL=78.5 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Metric: 69.2
Cut...
|
| TREND C191X1/2TC B/GUIDED HAND RAIL 51MM RAD |
Product Code: C191X1/2TC This cutter can be used to form the top portion of a handrail moulding when used in conjunction with Ref. C218X1/2TC.
For stationary machines - 12000 RPM recommended speed.
Dimensions:
D=82.7 mm
C=19 mm
B=12.7 mm
R=51 mm
OL=81.5 mm
Shank Diameter=1/...
|
| TREND C192X1/2TC OFFSET TONGUE AND GROOVER |
Product Code: C192X1/2TC A reversible finger jointer, to increase the gluing area for edge to edge joints.
Dimensions:
D=40.0 mm
D2=31 mm
C=32 mm
Shank Diameter=1/2 inch
OL=70 mm
Timber thickness min.=13 mm
Timber thickness max.=25 mm
Shank Diameter: 1/2
Diameter Metric: ...
|
| TREND C193X1/2TC B/GUIDED REBATER 31.8MM DIA X 15.9M |
Product Code: C193X1/2TC These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners.
When using bearing Ref. B95A make two passes when a full depth of cut is required.
Dimensions:
D=31.8 mm
C=15.9 mm
B=9.5 mm
B2=12.7 mm
E=9.5...
|
|
|
Basket 0 items - £0.00
