Trend

Trend Professional Jigsaw Blade - Upcut for clean face finish, pack of 5 100mm long blade with 10TPI (Teeth Per Inch) upcut profile for the cleanest of finishes on the face of the work. Suitable for materials from 4mm to 30mm thick, ideal for crosscu...

Trend Professional Jigsaw Blade - Down cut for fine finish, pack of 5 100mm long blade with 10TPI (Teeth Per Inch) down cut profile for fine cuts on timber and sheet materials. Suitable for materials from 4mm to 30mm thick, ideal for crosscutting and...

Trend Professional jigsaw blades five pack. Universal T-shank. Manufactured to the highest standards from high alloyed Chrome-Vanadium Steel (CV), perfect for use on softer materials. Up-cut, milled, alternate set. The wood grain is ripped and the sa...

Trend Professional Jigsaw Blade - For plastics and acrylics, pack of 5 75mm long blade with 12TPI (Teeth Per Inch) wavy set profile for sheet materials 55mm cut length, suitable for materials from 4mm to 30mm thick. Suitable for hard and soft woods a...

Trend Professional jigsaw blades five pack. Universal T-shank. Manufactured to the highest standards from high alloyed Chrome-Vanadium Steel (CV), perfect for use on softer materials. Up-cut, cross-ground set. The angular sloped tooth cuts the wood g...

Reinforced plastic. Has brass insert. Suitable when a strong clamping action is required. Dimensions: Thread=M10 Thread Length=25 mm H=32 mm D=50 mm Diameter Metric: 50 Diameter 2 Metric: M10 Cut Length Metric: 32...

Reinforced plastic lift and lock ratchet system. Has steel stud. Suitable when lever turning angle is limited. Dimensions: Thread=M6 Thread Length=30 mm H=28 mm D=42 mm Diameter Metric: 42 Diameter 2 Metric: M6 Cut Length Metric: 30...

Reinforced plastic lift and lock ratchet system. Has steel stud. Suitable when lever turning angle is limited. Dimensions: Thread=M8 Thread Length=35 mm H=36 mm D=63 mm Diameter Metric: 63 Diameter 2 Metric: M8 Cut Length Metric: 36...

Reinforced plastic lift and lock ratchet system. Has steel stud. Suitable when lever turning angle is limited. Dimensions: Thread=M10 Thread length=40 mm H=45 mm D=80 mm Diameter Metric: 80 Diameter 2 Metric: M10 Cut Length Metric: 40...

Reinforced plastic. Has steel stud. Suitable when a strong clamping action is required. Dimensions: Thread=M6 Thread length=20 mm H=23 mm D=32 mm Pack of 2 Diameter Metric: 32 Diameter 2 Metric: M6 Cut Length Metric: 20...

Reinforced plastic. Has steel stud. Suitable when a strong clamping action is required. Dimensions: Thread=M8 Thread length=35 mm H=27 mm D=40 mm Diameter Metric: 40 Diameter 2 Metric: M8 Cut Length Metric: 35...

Trend Kitchen Fitters Pack - 3 X 50mm x 12.7mm worktop cutters 12.7mm diameter X 50mm cutting depth; the essential cutter for routing post formed joints with worktop jigs in tops up to 40mm thick. Cut crisp and clean precision fit joints every time; ...

Five piece cutter pack aimed at kitchen fitters. Cutters have TC centre tip. TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Ideal for cutting kitchen worktops. ...

Worktop Jig Accessory for making fast, accurate angled worktop joints to accommodate out of square walls ADAPTABLE ANGLE RANGE Can be used for acute and obtuse wall angles up to 25 degrees out of square COMPATABILITY Works with Trend KWJ 750P Pro, ...

Trend Location Pins - For Trend KWJ700 and KWJ900 Worktop Jigs. Pack of 4. Set of four accurately machined replacement plastic location pins for the Trend KWJ700, KWJ900, KWJ700/PRO and KWJ950/PRO jigs. Replacement pins to ensure the Trend Jigs conti...

Trade work top jig for up to 700mm worktops. Hard wearing CNC machined Compact Grade High Pressure Laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. Left hand and right hand corners, 400mm radius peninsula...

Tradesman ALL IN ONE work top jig for up to 900mm worktops. Hard wearing CNC machined Compact Grade High Pressure Laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. Left hand and right hand corners, 400mm ra...

Cutter for use with the Leigh Dovetail Jig. These cutters have extra long shanks. Dimensions: D=20.5 mm C=32 mm OL=83 mm A=98 degrees Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Metric: 20.5 Cut Length Metric: 32 Overall Length Metri...

Cutter for use with the Leigh Dovetail Jig. These cutters have extra long shanks. Ref. L120 can calso be used with Trend Jig DJ300 and DeWalt DE6251 jigs. Dimensions: D=1/2 inch D=12.7 mm C=12 mm OL=62 mm A=104 degrees Shank Diameter=1/4 inch Sh...

For use with the Leigh Dovetail Jig. This cutter has an extra long shank for cutting dovetail pins. Dimensions: D=8 mm C=26 mm OL=70 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 8 Cut Length Metric: 26 Overall Length Metric: 7...

For use with the Leigh Dovetail Jig. This cutter has an extra long shank for cutting dovetail pins. Dimensions: D=8 mm C=26 mm OL=70 mm Shank Diameter=8 mm Shank Diameter: 8 mm Diameter Metric: 8 Cut Length Metric: 26 Overall Length Metric: 70...

Cutter for use with the Leigh Dovetail Jig. These cutters have extra long shanks. Dimensions: D=12.7 mm C=21 mm OL=67 mm A=98 degrees Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperial: 1/2 Diameter Metric: 12.7 Cut Length Metric: ...

Pack of four interlocking gripping blocks that lock together to allow workpiece to be held in place when sanding, drilling and finishing. No need to use clamps. Set-up in seconds. Grips both workpiece and bench. Lifts workpiece from bench, to allow ...

Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate recess for popular door locks. For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate....

Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate for larger locks quickly & accurately. Suitable for DDA (Disabilty Discrimination Act) lock size. 20mm x 235mm radius end face plate, 24mm x 2...

Trend Lock Jig for mortice locks and latches - for faceplates up to 250 long Infinitely adjustable sliding plates and stops for mortice and faceplates from 30mm up to 250mm long, ideal for use with obscure sized locks as well as all standard locks an...