Trend

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=50 mm Bore=M12 Kerf=2 mm No. of Teeth=4 Diameter Metric: 50...

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=50 mm Bore=M12 Kerf=3 mm No. of Teeth=4 Diameter Metric: 50...

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=50 mm Bore=M12 Kerf=5 mm No. of Teeth=4 Diameter Metric: 50...

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=50 mm Bore=M12 Kerf=4 mm No. of Teeth=4 Diameter Metric: 50...

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=50 mm Bore=M12 Kerf=6 mm No. of Teeth=4 Diameter Metric: 50...

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=50 mm Bore=M12 Kerf=8 mm No. of Teeth=4 Diameter Metric: 50...

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=50 mm Bore=M12 Kerf=11 mm No. of Teeth=4 Diameter Metric: 50...

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=40 mm Bore=M12 Kerf=10 mm No. of Teeth=2 Diameter Metric: 40...

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing. Dimensions: D=50 mm Bore=12 mm Kerf=4 mm No. of Teeth=4 Diameter Metric: 50...

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Dimensions: D=41.3 mm Kerf=6.0 mm No. of Teeth=2 Diameter Imperial: 1 5/8 Diameter Metric: 41.3...

Allows decorative cuts in panels and frames to disguise glue lines. Dimensions: D=36 mm C=6 mm R=3 mm Bore=1/4 inch Diameter Metric: 36...

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing. Dimensions: D=50 mm Bore=12 mm Kerf=6 mm No. of Teeth=4 Diameter Metric: 50...

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Dimensions: D=41.3 mm Kerf=8.0 mm No. of Teeth=2 Diameter Imperial: 1 5/8 Diameter Metric: 41.3...

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing. Dimensions: D=50 mm Bore=12 mm Kerf=8 mm No. of Teeth=4 Diameter Metric: 50...

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing. Dimensions: D=50 mm Bore=12 mm Kerf=10 mm No. of Teeth=4 Diameter Metric: 50...

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Dimensions: D=41.3 mm Kerf=10 mm No. of Teeth=2 Diameter Imperial: 1 5/8 Diameter Metric: 41.3...

Bearing guided tool to rout stepped groove for espagnolette lock recess. Two flute for clean finish. Dimensions: D1=40.05 mm Cut length=16.3/12.3 mm Step=2 mm Groove depth=2/8.5 mm OL=85 mm B=19.1 mm Shank Diameter=1/2 Shank Diameter: 1/2 Diameter...

Bearing guided tool to rout multi-point lock systems in wooden doors. Two flute for clean finish. Use in conjunction with multi-point lock system cutter ref. 4/09X1/2TC. Dimensions: D1=43.45/25.05 mm Cut length=20.5/14.2 mm OL=85 mm B=19.1 mm Shank ...

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=50 mm Bore=M12 Kerf=9.5 mm No. of Teeth=4 Diameter Metric: 50...

Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. Two sizes available to suit 4mm thick strip of 10mm or 15mm width. Intumescent strip is used to create an effective barrier to both fire and smok...

Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. Two sizes available to suit 4mm thick strip of 10mm or 15mm width. Intumescent strip is used to create an effective barrier to both fire and smok...

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=50 mm Bore=M12 Kerf=7 mm No. of Teeth=4 Diameter Metric: 50...

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Dimensions: D=40 mm Kerf=7.0 mm No. of Teeth=4 Diameter Metric: 40...

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=50 mm Bore=M12 Kerf=2.5 mm No. of Teeth=4 Diameter Metric: 50...

For biscuit jointing of timber, man-made fibre and particle board with the router. The set includes three sizes of bearing which set the correct depth of cut for the three sizes available. A slightly longer cut than the length of the biscuit is req...

For biscuit jointing of timber, man-made fibre and particle board with the router. The set includes three sizes of bearing which set the correct depth of cut for the three sizes available. A slightly longer cut than the length of the biscuit is req...