|
|
Trend |
| TREND TR/KFP/2 KITCHEN FITTERS PACK TWO |
Product Code: TR/KFP/2 Four piece cutter pack aimed at kitchen fitters.
Pack includes two 1/2 inch x 50mm cut length worktop cutters, one laminate trimmer and a biscuit jointing cutter.
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain ...
|
| TREND TR/KFP/3 KITCHEN FITTERS PACK TR17 X 5 PCS |
Product Code: TR/KFP/3 Trend Trade Kitchen Fitters Pack - 5x straight cutters
The perfect set for the trade for fitting kitchen worktops, with cutters to make the jointing cuts and bolt recesses.
Pack of five 50mm long cutters are perfect for the busy tradesman who needs h...
|
| TREND TR/KFP/5 KITCHEN FITTERS PK TR17DX2 & TR35 |
Product Code: TR/KFP/5 Three piece cutter pack aimed at kitchen fitters.
Pack includes two 1/2 inch x 50mm cut length worktop cutters with TC centre tips and a biscuit jointing cutter.
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain h...
|
| TREND TR/PACK/1 TRADE PACK TR09X1/4TC X 3 OFF |
Product Code: TR/PACK/1 Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTFE coated, indicated by distinctive black colouring.
Can be used on hardwood & softwood, fibreboard, plywood and particle board.
Etched...
|
| TREND TR/PACK/1X8MM TRADE PACK TR09X8MMTC X 3 OFF |
Product Code: TR/PACK/1X8MM Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTFE coated, indicated by distinctive black colouring.
Can be used on hardwood & softwood, fibreboard, plywood and particle board.
Etched...
|
| TREND TR/PACK/2 TRADE PACK TR17X1/2TC X 3 OFF |
Product Code: TR/PACK/2 Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTFE coated, indicated by distinctive black colouring.
Can be used on hardwood & softwood, fibreboard, plywood and particle board.
Etched...
|
| TREND TR/PACK/3 TRADE PACK TR17DX1/2TC X 3 OFF |
Product Code: TR/PACK/3 Trend Trade Kitchen Fitters Pack - 3x straight cutters with centre tip
Three 1/2in diameter cutters for kitchen worktop jointing, cutting the joints and bolt recesses.
PTFE coating on the bodies minimises heat and resin build up for increased perfo...
|
| TREND TR/PACK/3X12M TRADE PACK TR17DX12MMTC X 3 OFF |
Product Code: TR/PACK/3X12M Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTFE coated, indicated by distinctive black colouring.
Can be used on hardwood & softwood, fibreboard, plywood and particle board.
Etched...
|
| TREND TR01X1/4TC TWO FLUTE 3.2MM DIA X 12.7MM CUT |
Product Code: TR01X1/4TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR01X8MMTC TWO FLUTE 3.2MM DIA X 12.7MM CUT |
Product Code: TR01X8MMTC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR02X1/4TC TWO FLUTE 4MM DIA X 11MM CUT |
Product Code: TR02X1/4TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR02X8MMTC TWO FLUTE 4MM DIA X 11MM CUT |
Product Code: TR02X8MMTC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR03X1/4TC TWO FLUTE 5MM DIA X 16MM CUT |
Product Code: TR03X1/4TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR04X1/4TC TWO FLUTE 6MM DIA X 16MM CUT |
Product Code: TR04X1/4TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR04X8MMTC TWO FLUTE 6MM DIA X 16MM CUT |
Product Code: TR04X8MMTC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR05X1/4TC TWO FLUTE 6.35MM DIA X 16MM CUT |
Product Code: TR05X1/4TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR05X8MMTC TWO FLUTE 6.35MM DIA X 16MM CUT |
Product Code: TR05X8MMTC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR06X1/4TC TWO FLUTE 6.35MM DIA X 25MM CUT |
Product Code: TR06X1/4TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR07X1/4TC TWO FLUTE 8MM DIA X 19MM CUT |
Product Code: TR07X1/4TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR07X8MMTC TWO FLUTE 8MM DIA X 19MM CUT |
Product Code: TR07X8MMTC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR08X1/4TC TWO FLUTE 9.5MM DIA X 25MM CUT |
Product Code: TR08X1/4TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR09X1/2TC TWO FLUTE 10MM DIA X 19MM CUT |
Product Code: TR09X1/2TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR09X1/4TC TWO FLUTE 10MM DIA X 19MM CUT |
Product Code: TR09X1/4TC Trend Trade Straight Cutter - 10mm diameter
10mm diameter for rebating and grooving applications.
1/4in shank ideal for smaller routers allowing easy hand held control with guidebushes and side fences.
PTFE coating on the bodies minimises heat and...
|
|
|
Basket 0 items - £0.00
