Trend

Step drill with hardened cutting edges for Confirmat furniture construction screws. Used to stepped drill hole for Confirmat style screws for carcass assembly where a right angled joint is required. Supplied with HSS slow spiral drill. Dimensions: ...

Comprises magnetic holder and 30 assorted 25mm screwdriver bits in a plastic case with belt clip. Dimensions: Shank Diameter=1/4 inch hex Shank Diameter: 1/4 hex ...

Trend Snappy Screwdriver bit and holder set - 15pc set Multi-profile bit set covering a wide range of screwdriving applications and screw head types. Ideal for the workshop or toolkit. Colour coded rings on each bit shank ensures correct, quick and e...

Trend Snappy Square Drive Adapter - 1/4inch The perfect accessory for use with socket sets when driving or removing nuts and bolts. Allows any 1/4in AF socket to be used with a drill or impact driver. Speeds up any applications where nuts and bolts a...

Trend Snappy Square Drive Adapter - 3/8inch The perfect accessory for use with socket sets when driving or removing nuts and bolts. Allows any 3/8in AF socket to be used with a drill or impact driver. Speeds up any applications where nuts and bolts a...

Trend Snappy Square Drive Adapter - 1/2inch The perfect accessory for use with socket sets when driving or removing nuts and bolts. Allows any 1/2in AF socket to be used with a drill or impact driver. Speeds up any applications where nuts and bolt...

Square Robertson screwdriver bits. Dimensions: D=3/32 inch D=2.38 mm OL=50 mm Shank Diameter=1/4 inch hex Shank Diameter: 1/4 hex Diameter Imperial: 3/32 Diameter Metric: 2.38 Overall Length Metric: 50...

...

...

No 2 Robertson square drive bits. Dimensions: Overall length=75 mm Overall length=3 inch D=1/8 inch D=3.2mm Shank Diameter=1/4 inch hex Shank Diameter: 1/4 hex Diameter Imperial: 1/8 Diameter Metric: 3.2 Overall Length Metric: 75...

...

Square Robertson screwdriver bits. Dimensions: OL=50 mm D=9/64 nch D=3.6mm Shank Diameter=1/4 inch hex Shank Diameter: 1/4 hex Diameter Imperial: 9/64 Diameter Metric: 3.6 Overall Length Metric: 50...

A Trend Snappy shank lip and spur 5mm HSS drill bit guide, which when used with a template will allow 5mm diameter blind holes to be drilled for 5mm shelf supports. Dimensions: Shank Diameter=1/4 inch hex D=9.5 mm d=5 mm Drilling depth=12.7 mm Sha...

Heavy duty fabric tool holder. With elastic pockets to hold Trend Snappy shanks. Supplied with a Trend Snappy pencil. Tool holders have a belt strap and are hook & loop fastening. Tool contents not included. Dimensions: Holding capacity=30 pieces ...

Trend Snappy Heavy Duty Fabric Tool Holder - 60 piece High quality heavy duty fabric holder with elastic pockets to hold Trend Snappy shanks. The easy way to mix and match your favourite or most used Snappy accessories to built a set that suits your ...

Trend Snappy Quick Change Tool Set - 60 Piece Supplied with the Trend Snappy Quick Change Chuck for fast, efficient bit swaps ensuring increased productivity and performance. Massive selection of accessories for drilling in wood, masonry and steel, ...

Power socket for the T11ELK router. Dimensions: 32A BS4343...

Replacement blade for cutter set 349WS. Dimensions: Min.=25 mm Max.=45 mm ...

Replacement screw for the rota-tip cutters. Diameter Metric: M3...

Replacement screw for the rota-tip cutters. Dimensions: 8 mm head diameter Diameter Metric: M4...

Spare part packs make ordering spares easier. Packs include, hex key (if required), screw, washer and shield (if required). Dimensions: Hex key=3 mm Screw=M4X6 mm Washer ID=4.0 mm...

Spare part packs make ordering spares easier. Packs include, hex key (if required), screw, washer and shield (if required). Dimensions: Hex key=3 mm Screw=M4X6 mm Washer ID=4.0 mm Shield OD=5/8 inch ID=1/4 inch...

Spare part packs make ordering spares easier. Packs include, hex key (if required), screw, washer and shield (if required). Dimensions: Hex key=3/32 inch Screw=NC5 X 3/8 inch Washer ID=3.5 mm Shield OD=1/2 inch ID=3/16 inch Washer ID=5.0mm...

Replacement groover for the C149. Dimensions: D=41 mm Kerf=6.35 mm Bore=8 mm Diameter Metric: 41...

Replacement block for the C156. Dimensions: D=41 mm R=3.5 mm Bore=8 mm Diameter Metric: 41...

Replacement block for the C157. Dimensions: D=41 mm A=10 degrees Bore=8 mm Diameter Metric: 41 Angle: 10...