|
|
Trend |
| TREND CIRC/2 CIRCLIP 15MM DIN 471-15 |
Product Code: CIRC/2 Sprung steel fasteners to hold bearings in position onto grooved shanks.
Dimensions:
D=1/2 inch
D=12.7 mm
Diameter Imperial: 1/2
Diameter Metric: 12.7...
|
| TREND CLEAN/500 TOOL & BIT CLEANER 532ML |
Product Code: CLEAN/500 Spray-on resin and pitch remover.
Simply spray on wipe off.
Ideal for sawblades, router cutters, planer blades, files, wrenches and drill bits etc.
Excellent lubricant. Provides rust and corrosion protection.
Has unique properties which break the m...
|
| TREND CLT/NUT/T4 COLLET NUT T4 |
Product Code: CLT/NUT/T4 Replacement collet nut.
Dimensions:
D=17 (A/F) mm
Thread=M15x1.0mm
Diameter Metric: 17 (A/F)...
|
| TREND CLT/SLV/1012 COLLET SLEEVE 10MM TO 12MM |
Product Code: CLT/SLV/1012 Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensive periods or heavy work.
Dimensions:
D1=12 mm
...
|
| TREND CLT/SLV/10127 COLLET SLEEVE 10MM TO 12.7MM |
Product Code: CLT/SLV/10127 Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensive periods or heavy work.
Dimensions:
D=1/2 inc...
|
| TREND CLT/SLV/3263 COLLET SLEEVE 3.2MM TO 6.35MM |
Product Code: CLT/SLV/3263 Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensive periods or heavy work.
Dimensions:
D=1/4 inc...
|
| TREND CLT/SLV/363 COLLET SLEEVE 3MM TO 6.35MM |
Product Code: CLT/SLV/363 Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensive periods or heavy work.
Dimensions:
D=1/4 mm
...
|
| TREND CLT/SLV/612 COLLET SLEEVE 6MM TO 12MM |
Product Code: CLT/SLV/612 Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensive periods or heavy work.
Dimensions:
D=12 mm
O...
|
| TREND CLT/SLV/6127 COLLET SLEEVE 6MM TO 12.7MM |
Product Code: CLT/SLV/6127 Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensive periods or heavy work.
Dimensions:
D=1/2 inc...
|
| TREND CLT/SLV/6312 COLLET SLEEVE 6.35MM TO 12MM |
Product Code: CLT/SLV/6312 Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensive periods or heavy work.
Dimensions:
D=12 mm
O...
|
| TREND CLT/SLV/63127 COLLET SLEEVE 6.35MM TO 12.7MM |
Product Code: CLT/SLV/63127 Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensive periods or heavy work.
Dimensions:
D=1/2 inc...
|
| TREND CLT/SLV/638 COLLET SLEEVE 6.35MM TO 8MM |
Product Code: CLT/SLV/638 Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensive periods or heavy work.
Dimensions:
D=8 mm
OL...
|
| TREND CLT/SLV/6395 COLLET SLEEVE 6.35MM TO 9.5MM |
Product Code: CLT/SLV/6395 Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensive periods or heavy work.
Dimensions:
D=3/8 inc...
|
| TREND CLT/SLV/68 COLLET SLEEVE 6MM TO 8MM |
Product Code: CLT/SLV/68 Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensive periods or heavy work.
Dimensions:
D=8 mm
OL...
|
| TREND CLT/SLV/810 COLLET SLEEVE 8MM TO 10MM |
Product Code: CLT/SLV/810 Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensive periods or heavy work.
Dimensions:
D1=10 mm
...
|
| TREND CLT/SLV/812 COLLET SLEEVE 8MM TO 12MM |
Product Code: CLT/SLV/812 Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensive periods or heavy work.
Dimensions:
D=12 mm
O...
|
| TREND CLT/SLV/8127 COLLET SLEEVE 8MM TO 12.7MM |
Product Code: CLT/SLV/8127 Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensive periods or heavy work.
Dimensions:
D=1/2 inc...
|
| TREND CLT/SLV/895 COLLET SLEEVE 8MM TO 9.5MM |
Product Code: CLT/SLV/895 Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensive periods or heavy work.
Dimensions:
D1=3/8 in...
|
| TREND CLT/SLV/95127 COLLET SLEEVE 9.5MM TO 12.7MM |
Product Code: CLT/SLV/95127 Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensive periods or heavy work.
Dimensions:
D=1/2 inc...
|
| TREND CLT/T10/12 COLLET T10 ROUTER 12MM |
Product Code: CLT/T10/12 A precision multi-slit one piece collet.
Does not include the collet nut.
For Trend T10, T11, T12 and T14 routers.
Dimensions:
d=12 mm...
|
| TREND CLT/T10/8 COLLET T10 ROUTER 8MM |
Product Code: CLT/T10/8 A precision multi-slit one piece collet.
Does not include the collet nut.
For Trend T10, T11, T12 and T14 routers.
Dimensions:
d=8 mm...
|
| TREND CLT/T3/3 COLLET 3MM T3 |
Product Code: CLT/T3/3 One piece collet for the T3EK.
Does not include the collet nut.
Dimensions:
d=3 mm
Body length=20 mm
Body dia mouth.=12.2 mm
Body dia base.=10 mm...
|
|
|
Basket 0 items - £0.00
