|
|
Trend |
| TREND C159X1/4TC DOVETAIL 12.7MM DIA X 104 DEG SPURS |
Product Code: C159X1/4TC To suit user preference, the table shows angles from the horizontal and the profiles show angles from the vertical.
Dimensions:
D=14.3 mm
D2=12.7 mm
C=1/2 inch
C=12.7 mm
OL=55 mm
A=104 degrees
Shank Diameter=1/4 inch
For Elu/DeWalt & Titan 11 mm com...
|
| TREND C160AX1/4TC DOVETAIL 15.9MM DIA X 104 DEG |
Product Code: C160AX1/4TC To suit user preference, the table shows angles from the horizontal and the profiles show angles from the vertical.
Dimensions:
D=5/8 inch
D=15.9 mm
C=14 mm
OL=54 mm
A=104 degrees
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 5/8
...
|
| TREND C160X1/4TC DOVETAIL 17.7MM DIA X 104 DEG SPURS |
Product Code: C160X1/4TC To suit user preference, the table shows angles from the horizontal and the profiles show angles from the vertical.
Dimensions:
D=17.7 mm
D2=15.9 mm
C=35/64 inch
C=14 mm
OL=54 mm
A=104 degrees
Shank Diameter=1/4 inch
For Titan 12 mm comb
Shank Diam...
|
| TREND C161AX1/4TC DOVETAIL 18MM DIA X 104 DEG |
Product Code: C161AX1/4TC To suit user preference, the table shows angles from the horizontal and the profiles show angles from the vertical.
Dimensions:
D=45/64 inch
D=18 mm
C=16 mm
OL=56 mm
A=104 degrees
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 45/6...
|
| TREND C161X1/4TC DOVETAIL 20MM DIA X 104 DEG SPURS |
Product Code: C161X1/4TC To suit user preference, the table shows angles from the horizontal and the profiles show angles from the vertical.
Dimensions:
D=19.7 mm
D2=17.5 mm
C=5/8 inch
C=16 mm
OL=56 mm
A=104 degrees
Shank Diameter=1/4 inch
For Titan 14 mm comb
Shank Diamet...
|
| TREND C162AX1/4TC DOVETAIL 15MM DIA X 104 DEG GUIDED |
Product Code: C162AX1/4TC These cutters are for use with the Nutool and Axminster Power Tool Centre Dovetail Jigs.
Dimensions:
D=15 mm
C=13.5 mm
OL=63 mm
B=12.7 mm
A=104 degrees
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 19/32
Diameter Metric: 15
Cut ...
|
| TREND C162X1/4TC DOVETAIL 12.7MM DIA X 104DEG GUIDED |
Product Code: C162X1/4TC These cutters are for use with the Nutool and Axminster Power Tool Centre Dovetail Jigs.
Dimensions:
D=12.7 mm
C=12.7 mm
OL=63 mm
B=12.7 mm
A=104 degrees
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 1/2
Diameter Metric: 12.7
Cu...
|
| TREND C163X1/4TC DOVETAIL 15MM DIA X 104 DEG SPURS |
Product Code: C163X1/4TC To suit user preference, the table shows angles from the horizontal and the profiles show angles from the vertical.
Dimensions:
D=15.1 mm
D2=14.5 mm
C=13.7 mm
OL=55 mm
A=104 degrees
Shank Diameter=1/4 inch
For Nu-tool 12 mm comb
Shank Diameter: 1/4...
|
| TREND C165BX1/2TC PROFILER 19.05MM DIA X 63MM CUT |
Product Code: C165BX1/2TC Shank mounted bearing profilers are ideal for template guidance.
Use for rebating and trimming edges only.
Extra care must be taken to avoid cutter breakage.
Dimensions:
D=19.05 mm
C=63 mm
C=2 inch
Ol=106 mm
B=19.1 mm
Shank Diameter=1/2 inch
Sh...
|
| TREND C165X1/2TC PROFILER 19.1MM DIA X19.1MM CUT C/T |
Product Code: C165X1/2TC Trend Craft Pro 1/2in shank bearing guided flush trimming cutter - 19.1mm diameter Two Flute Carbide tips.
Two flute carbide TCT tips for clean, professional finish on timber, plastic laminates and veneers.
Shank mounted bearing allows good vision o...
|
| TREND C166X1/2TC PROFILER 19.1MM DIA X 50MM CUT |
Product Code: C166X1/2TC Trend Craft Pro 1/2in shank bearing guided flush trimming cutter - 19.1mm diameter Two Flute Carbide tips.
Two flute carbide TCT tips for clean, professional finish on timber, plastic laminates and veneers.
Shank mounted bearing allows good vision o...
|
| TREND C166X12MMTC PROFILER 19.1MM DIA X 50MM CUT |
Product Code: C166X12MMTC Shank mounted bearing profilers are ideal for template guidance.
Use for rebating and trimming edges only.
Extra care must be taken to avoid cutter breakage.
Dimensions:
D=3/4 inch
D=19.1 mm
C=1 31/32 inch
C=50 mm
OL=94.5 mm
Shank Diameter=12 mm...
|
| TREND C168X8MMTC GUIDED TRIMMER 6.35MM DIA X 25.4MM |
Product Code: C168X8MMTC Used for trimming plastic or plywood overlays.
Also for copy profiling with a template.
Dimensions:
D=1/4 inch
D=6.35 mm
C=1 inch
C=25.4 mm
B=6.35 mm
A=90 degrees
OL=76.5 mm
Shank Diameter=8 mm
Shank Diameter: 8 mm
Diameter Imperial: 1/4
Diameter...
|
| TREND C169X1/2TC B/GUIDED OGEE PANEL 17.5MM RAD |
Product Code: C169X1/2TC Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF.
For use in a router table only.
Take several passes, increasing the depth with each pas...
|
| TREND C170X1/2TC B/GUIDED BEVEL PANEL RAISER 15 DEG |
Product Code: C170X1/2TC Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF.
For use in a router table only.
Take several passes, increasing the depth with each pas...
|
| TREND C171AX1/2TC TWO FLUTE 12MM DIA X 38MM CUT |
Product Code: C171AX1/2TC Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.
Use on softwoods, hardwoods, MDF, plywood and chipboard.
Cutter has a bottom cut feature.
Dimensions:
D=15/32 inch
D=12 mm
C=1 1/2 inches
C=3...
|
| TREND C171X1/4TC TWO FLUTE 12MM DIA X 32MM CUT |
Product Code: C171X1/4TC Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.
Use on softwoods, hardwoods, MDF, plywood and chipboard.
Cutter has a bottom cut feature.
Dimensions:
D=15/32 inch
D=12 mm
C=1 1/4 inches
C=32...
|
| TREND C171X8MMTC TWO FLUTE 12MM DIA X 32MM CUT |
Product Code: C171X8MMTC Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.
Use on softwoods, hardwoods, MDF, plywood and chipboard.
Cutter has a bottom cut feature.
Dimensions:
D=15/32 inch
D=12 mm
C=1 1/4 inches
C=32...
|
| TREND C172DX1/2TC TWO FLUTE 12MM DIA X 63MM CUT C/T |
Product Code: C172DX1/2TC Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.
Use on softwoods, hardwoods, MDF, plywood and chipboard.
Carbide centre tip profile, ideal for plunging work on abrasive materials with jigs.
...
|
| TREND C172MX1/2TC TWO FLUTE 12MM DIA X 63MM 100MM OL |
Product Code: C172MX1/2TC Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.
Use on softwoods, hardwoods, MDF, plywood and chipboard.
Cutter has a bottom cut feature.
Dimensions:
D=15/32 inch
D=12 mm
C=2 1/2 inches
C=63...
|
| TREND C172X12MMTC TWO FLUTE 12MM DIA X 63MM CUT |
Product Code: C172X12MMTC Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising.
Use on softwoods, hardwoods, MDF, plywood and chipboard.
Cutter has a bottom cut feature.
Dimensions:
D1=15/32 inches
D1=12 mm
C=2 1/2 inches
...
|
| TREND C173X1/2TC LARGE PANEL RAISER R12MM |
Product Code: C173X1/2TC Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF.
For use in a router table only.
Take several passes, increasing the depth with each pas...
|
|
|
Basket 0 items - £0.00
