|
|
Trend |
| TREND 3/73X1/2TC TWO FLUTE 12MM DIA X 50MM 257045 |
Product Code: 3/73X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=15/32 inch
D=12 mm
C=50 mm
OL=109 mm
Shank Diameter=1/2 inch
Shank...
|
| TREND 3/74X1/2TC TWO FLUTE 12MM DIA X 32MM CUT |
Product Code: 3/74X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=15/32 inch
D=12 mm
C=1 1/4 inch
C=32 mm
OL=73 mm
Shank Diameter=1/2...
|
| TREND 3/74X1/4TC TWO FLUTE 12MM DIA X 32MM CUT |
Product Code: 3/74X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=15/32 inch
D=12 mm
C=1 1/4 inch
C=32 mm
OL=65 mm
Shank Diameter=1/4...
|
| TREND 3/75MX1/2TC TWO FLUTE 12MM DIA X 63MM X 100 OL |
Product Code: 3/75MX1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Short shank for Makita 3600B & 3612BR, Ryobi and Hitachi routers.
Dimensions:
D=1...
|
| TREND 3/75X1/2TC TWO FLUTE 12MM DIA X 63MM CUT |
Product Code: 3/75X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=15/32 inch
D=12 mm
C=2 1/2 inch
C=63 mm
OL=114 mm
Shank Diameter=1/...
|
| TREND 3/76X1/4TC TWO FLUTE 12.55MM DIA X 25.MM CUT |
Product Code: 3/76X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=31/64 inch
D=12.55 mm
C=25.4 mm
OL=67 mm
Shank Diameter=1/4 inch
S...
|
| TREND 3/7X1/2TC TWO FLUTE 11MM DIA X 25MM CUT |
Product Code: 3/7X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=7/16 inch
D=11 mm
C=25 mm
OL=69 mm
Shank Diameter=1/2 inch
Shank D...
|
| TREND 3/7X1/4TC TWO FLUTE 11MM DIA X 25MM 257030 |
Product Code: 3/7X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=7/16 inch
D=11 mm
C=25 mm
OL=57 mm
Shank Diameter=1/4 inch
Shank D...
|
| TREND 3/80X1/4TC TWO FLUTE 12.7MM DIA X 19MM 253338 |
Product Code: 3/80X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=1/2 inch
D=12.7 mm
C=19 mm
OL=51 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 3/81DCX1/2TC TWO FLUTE 12.7MM DIAX32MM CLEARANCE |
Product Code: 3/81DCX1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
TC tips are ground with greater clearance for routing of resinous material.
Dimen...
|
| TREND 3/81X1/2TC TWO FLUTE 12.7MM DIA X 32MM 257047 |
Product Code: 3/81X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=1/2 inch
D=12.7 mm
C=32 mm
OL=77 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 3/81X1/4TC TWO FLUTE 12.7MM DIA X 32MM CUT |
Product Code: 3/81X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=1/2 inch
D=12.7 mm
C=32 mm
OL=64 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 3/82X1/2TC TWO FLUTE 12.7MM DIA X 37MM 257048 |
Product Code: 3/82X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=1/2 inch
D=12.7 mm
C=37 mm
OL=79 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 3/83DCX1/2TC D/E 12.7MM DIA X 50MM CUT CLEARANCE |
Product Code: 3/83DCX1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Ideal for cutting kitchen worktops.
TC tips are ground with greater clearance for ...
|
| TREND 3/83DX1/2TC D/E 12.7MM DIA X 50MM CUT 99MM OL |
Product Code: 3/83DX1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Ideal for cutting kitchen worktops
Dimensions:
D=1/2 inch
D=12.7 mm
C=50 mm
OL=99...
|
| TREND 3/83MX1/2TC D/E 12.7MM DIA X 50MM CUT 83MM OL |
Product Code: 3/83MX1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Short shank for Makita 3600B & 3612BR, Ryobi and Hitachi routers.
Ideal for cutting kitchen worktops.
Dimensio...
|
| TREND 3/83X1/2TC D/E 12.7 DIA X 50MM 108MM OL 257049 |
Product Code: 3/83X1/2TC TCT extra long cutter.
Two flutes give a clean finish to cut edges.
Use only on professional routers with 80mm deep plunge and suitable one piece multi-slit collet to ensure safe cutter retraction into base.
Dimensions:
D=1/2 inch
D=12.7 mm
C=50 mm
...
|
| TREND 3/84LX1/2TC POCKET 12.7MM DIA X 22MM CUT |
Product Code: 3/84LX1/2TC A two flute cutters with extra long shanks.
Deep grooving, rebating and mortising.
Useful for template work when thickness of template restricts depth.
Extra care must be taken to avoid breakage.
Dimensions:
D=1/2 inch
D=12.7 mm
C=32/22 mm
C2...
|
| TREND 3/85X1/2TC TWO FLUTE 12.7MM DIA X 63MM CUT |
Product Code: 3/85X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Ideal for cutting kitchen worktops.
Dimensions:
D=1/2 inch
D=12.7 mm
C=63 mm
OL=115 mm
Shank Diameter=1/2 inch...
|
| TREND 3/86CX1/2TC TWO FLUTE 12.7MM DIA X 75MM CUT |
Product Code: 3/86CX1/2TC Extra long two flute cutter for routing hollow honey-comb work top boards only.
Use only in professional routers with an 80mm deep plunge and suitable one piece multi-slit collet to ensure safe cutter retraction into the router base.
TC tips are conv...
|
| TREND 3/8LX1/4TC TWO FLUTE 12MM DIA X 19MM CUT |
Product Code: 3/8LX1/4TC Two flute TC cutter giving good chip clearance.
Ideal for shallow lateral routing cuts such as recessing hinges.
Corners will require final trimming square with a hand chisel or a corner chisel.
Suitable for Trend Hinge & Lock Jigs.
Dimensions:
...
|
| TREND 3/8X1/4TC TWO FLUTE 12MM DIA X 19MM 253334 |
Product Code: 3/8X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=15/32 inch
D=12 mm
C=19 mm
OL=59 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 3/9X1/4TC TWO FLUTE 13MM DIA X 20MM 257034 |
Product Code: 3/9X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=33/64 inch
D=13 mm
C=20 mm
OL=52 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 30/2X1/4TC UNDERCUT ROUTER 3.2MM C X 19.1MM D |
Product Code: 30/2X1/4TC To produce an undercut on relief lettering to create a more aesthetic appearance, as well as for edge grooving.
Dimensions:
D=3/4 inch
D=19.1 mm
C=1/8 inch
C=3.2 mm
B=12.7 mm
E=3.2 mm
OL=53 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter I...
|
| TREND 30/4X1/4TC UNDERCUT ROUTER 6.35MM C X 19.1MM D |
Product Code: 30/4X1/4TC To produce an undercut on relief lettering to create a more aesthetic appearance, as well as for edge grooving.
Dimensions:
D=3/4 inch
D=19.1 mm
C=1/4 inch
C=6.3 mm
B=12.7 mm
E=3.2 mm
OL=60 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4...
|
| TREND 30/6X1/4TC UNDERCUT ROUTER 6.35MM C X 25.4MM D |
Product Code: 30/6X1/4TC To produce an undercut on relief lettering to create a more aesthetic appearance, as well as for edge grooving.
Dimensions:
D=1 inch
D=25.4 mm
C=1/4 inch
C=6.3 mm
B=12.7 mm
OL=55 mm
E=6.35 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Im...
|
|
|
Basket 0 items - £0.00
