Trend

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair tre...

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair tre...

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair tre...

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair tre...

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair tre...

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair tre...

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair tre...

Roughing cutter which leaves an overhang of 3mm, for secondary final trimming. Life can be extended by varying height of cutter. Dimensions: D=12.7 mm C=1 inch C=25.4 mm B=19 mm A=90 degrees OL=67 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Dia...

Self guided with low profile ball bearing guide and bearing fixing screw. For use in restrictive applications or within rebates of minimum 8mm. Down cut to prevent breakout on veneers. Dimensions: D=3/4 inch D=19.1 mm C=5/8 inch C=16 mm B=19.1 m...

Self guided with low profile ball bearing guide and bearing fixing screw. For use in restrictive applications or within rebates of minimum 8mm. Down cut to prevent breakout on veneers. Dimensions: D=3/4 inch D=19.1 mm C=1 inch C=25.0 mm B=19.1 m...

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profili...

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profili...

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profilin...

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profili...

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profili...

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profili...

With bearing guided ogees, change profile by using a larger bearing and vary the depth. Dimensions: D=1 inch D=25.4 mm C=5/8 inch C=15.9 mm B=9.5 mm B2=12.7 mm R=4 mm OL=63 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Imperial: 1 Diame...

With bearing guided ogees, change profile by using a larger bearing and vary the depth. Dimensions: D=1 inch D=25.4 mm C=5/8 inch C=15.9 mm B=9.5 mm B2=12.7 mm R=4 mm OL=54 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperial: 1 Diame...

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. A maximum of 3mm overlap should be left before copy profiling....

With bearing guided ogees, change profile by using a larger bearing and vary the depth. Dimensions: D=34.9 mm C=20 mm B=9.5 mm, B2=12.7 mm R=6.3 mm OL=67.5 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Metric: 34.9 Cut Length Metric: 2...

With bearing guided ogees, change profile by using a larger bearing and vary the depth. Dimensions: D=34.9 mm C=20 mm B=9.5 mm B2=12.7 mm R=6.3 mm OL=58 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 34.9 Cut Length Metric: 20 O...

The two bearings supplied offer the means of cutting different depths of mouldings. Dimensions: D=22.2 mm C=14.3 mm B=9.5 mm B2=12.7 mm R=1/4 inch R=6.3 mm OL=51 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperial: 7/8 Diameter Metri...

The two bearings supplied offer the means of cutting different depths of mouldings. Dimensions: D=1 1/8 inch D=28.5 mm C=14 mm B=9.5 mm B2=12.7 mm R=3/8 inch R=9.5 mm OL=60.5 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Imperial: 1 1/8 ...

The two bearings supplied offer the means of cutting different depths of mouldings. Dimensions: D=1 1/8 inch D=28.5 mm C=14 mm B=9.5 mm B2=12.7 mm R=3/8 inch R=9.5 mm OL=52 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperial: 1 1/8 D...

The two bearings supplied offer the means of cutting different depths of mouldings. Dimensions: D=34.9 mm C=16 mm B=9.5 mm B2=12.7 mm R=1/2 inch R=12.7 mm OL=64 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Metric: 34.9 Cut Length Metri...

The two bearings supplied offer the means of cutting different depths of mouldings. Dimensions: D=34.9 mm C=16 mm B=9.5 mm B2=12.7 mm R=1/2 inch R=12.7 mm OL=55 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 34.9 Cut Length Metri...