|
|
Trend |
| TREND C056X1/2TC RADIUS 9.5MM RAD X 19.1MM DIA |
Product Code: C056X1/2TC These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.
For deep channels, take a series of passes.
Dimensions:
D=3/4 inch
D=19.1 mm
C=1/2 inch
C=12.7 mm
R=9.5 mm
OL=51 mm
Shank Diameter=1/2 i...
|
| TREND C056X1/4TC RADIUS 9.5MM RAD X 19.1MM DIA |
Product Code: C056X1/4TC These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.
For deep channels, take a series of passes.
Dimensions:
D=3/4 inch
D=19.1 mm
C=1/2 inch
C=12.7 mm
R=9.5 mm
OL=53 mm
Shank Diameter=1/4 i...
|
| TREND C056X8MMTC RADIUS 9.5MM RAD X 19.1MM DIA |
Product Code: C056X8MMTC These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.
For deep channels, take a series of passes.
Dimensions:
D=3/4 inch
D=19.1 mm
C=1/2 inch
C=12.7 mm
R=9.5 mm
OL=53 mm
Shank Diameter=8 mm
...
|
| TREND C057X1/4TC RADIUS 11.1MM RAD X 22.2MM DIA |
Product Code: C057X1/4TC These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.
For deep channels, take a series of passes.
Dimensions:
D=7/8 inch
D=22.2 mm
C=5/8 inch
C=15.9 mm
R=11.1 mm
OL=56 mm
Shank Diameter=1/4 ...
|
| TREND C058X1/2TC RADIUS 12.7MM RAD X 25.4MM DIA |
Product Code: C058X1/2TC These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.
For deep channels, take a series of passes.
Dimensions:
D=1 inch
D=25.4 mm
C=5/8 inch
C=15.9 mm
R=12.7 mm
OL=54.5 mm
Shank Diameter=1/2 ...
|
| TREND C058X1/4TC RADIUS 12.7MM RAD X 25.4MM DIA |
Product Code: C058X1/4TC These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.
For deep channels, take a series of passes.
Dimensions:
D=1 inch
D=25.4 mm
C=5/8 inch
C=15.9 mm
OL=56.5 mm
R=12.7 mm
Shank Diameter=1/4 ...
|
| TREND C058X8MMTC RADIUS 12.7MM RAD X 25.4MM DIA |
Product Code: C058X8MMTC These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.
For deep channels, take a series of passes.
Dimensions:
D=1 inch
D=25.4 mm
C=5/8 inch
C=15.9 mm
R=12.7 mm
OL=56 mm
Shank Diameter=8 mm
...
|
| TREND C059X1/4TC S/GUIDED RAD 4.8MM RAD |
Product Code: C059X1/4TC Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.
The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow radius.
Dimensions:
C=9/16 inch
C=14.3 mm
D=19.1 mm...
|
| TREND C060X1/4TC S/GUIDED RAD 6.3MM RAD |
Product Code: C060X1/4TC Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.
The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow radius.
Dimensions:
C=9/16 inch
C=14.3 mm
D=22.2 mm...
|
| TREND C061X1/4TC S/GUIDED RAD 7.9MM RAD |
Product Code: C061X1/4TC Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.
The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow radius.
Dimensions:
C=9/16 inch
C=14.3 mm
D=25.3 mm...
|
| TREND C062X1/4TC S/GUIDED RAD 9.5MM RAD |
Product Code: C062X1/4TC Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.
The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow radius.
Dimensions:
C=9/16 inch
C=14.3 mm
D=28.5
B=...
|
| TREND C063AX1/2TC TWO FLUTE GUIDED COVE 16.0MM RAD |
Product Code: C063AX1/2TC Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.
The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow radius.
Dimensions:
D1=41.3 mm
C=3/4 inches
C=19.1 ...
|
| TREND C063BX1/2TC TWO FLUTE GUIDED COVE 19.1MM RAD |
Product Code: C063BX1/2TC Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.
The guide bearing follows the vertical edge or template.
Dimensions:
D1=50.8 mm
C=1 inches
C=25.4 mm
B=12.7 mm
R1=3/4 inches
R1=19.1 mm
OL=75 mm
Shank Diamete...
|
| TREND C063CX1/2TC TWO FLUTE GUIDED COVE 25.4MM RAD |
Product Code: C063CX1/2TC Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.
The guide bearing follows the vertical edge or template.
Dimensions:
D1=63.5 mm
C=1 inches
C=25.4 mm
B=12.7 mm
R1=1 inches
R1=25.4 mm
OL=75 mm
Shank Diameter=...
|
| TREND C063X1/2TC B/GUIDED COVE 12.7MM RAD |
Product Code: C063X1/2TC Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.
The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow radius.
Dimensions:
D1=34.9 mm
C=3/4 inches
C=19.1 ...
|
| TREND C063X1/4TC S/GUIDED RAD 12.7MM RAD |
Product Code: C063X1/4TC Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.
The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow radius.
Dimensions:
D1=34.9 mm
C=3/4 inches
C=19.1 ...
|
| TREND C065X1/4TC CAVETTO 4.8MM RAD |
Product Code: C065X1/4TC Self guiding cavetto style cutter, which follow the board edges for straight or curved work radius.
Dimensions:
C=1/2 inch
C=12.7 mm
D=31 mm
B=12.7 mm
R=4.8 mm
OL=65 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 31
Cut Length Im...
|
| TREND C066X1/4TC CAVETTO 7.9MM RAD |
Product Code: C066X1/4TC Self guiding cavetto style cutter, which follow the board edges for straight or curved work radius.
Dimensions:
C=5/8 inch
C=15.9 mm
D=38.6 mm
B=12.7 mm
R=7.9 mm
OL=68 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 38.6
Cut Lengt...
|
| TREND C067X1/4TC STAFF BEAD 2MM RAD X 12.7MM CUT |
Product Code: C067X1/4TC These staff bead are ideal for producing nosings and attractive edges. Edge cut only.
Dimensions:
D=13.5 mm
C=1/2 inch
C=12.7 mm
R=2 mm
OL=53 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 13.5
Cut Length Imperial: 1/2
Cut Le...
|
| TREND C068X1/4TC STAFF BEAD 2.8MM RAD X 12.7MM CUT |
Product Code: C068X1/4TC These staff bead are ideal for producing nosings and attractive edges. Edge cut only.
Dimensions:
D=15 mm
C=1/2 inch
C=12.7 mm
R=2.8 mm
OL=53 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 15
Cut Length Imperial: 1/2
Cut Length...
|
| TREND C069X1/4TC STAFF BEAD 3.6MM RAD X 19.1MM CUT |
Product Code: C069X1/4TC These staff bead are ideal for producing nosings and attractive edges. Edge cut only.
Dimensions:
D=17 mm
C=3/4 inch
C=19.1 mm
R=3.6 mm
OL=68 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 17
Cut Length Imperial: 3/4
Cut Leng...
|
| TREND C070BX1/2TC STAFF BEAD/NOSING 8MM RAD |
Product Code: C070BX1/2TC These staff bead are ideal for producing nosings and attractive edges. Edge cut only.
Dimensions:
D=27 mm
C=30 mm
OL=2 19/32inch
OL=68 mm
R=8 mm
Shank Dia.=1/2 inch
Shank Diameter: 1/2
Diameter Imperial: 1 1/16
Diameter Metric: 27
Cut Length ...
|
| TREND C070CX1/2TC STAFF BEAD/NOSING 10MM RAD |
Product Code: C070CX1/2TC These staff bead are ideal for producing nosings and attractive edges. Edge cut only.
Dimensions:
D=33 mm
C=35 mm
OL=2 7/8 inch
OL=73 mm
R=10 mm
Shank Dia.=1/2 inch
Shank Diameter: 1/2
Diameter Metric: 33
Cut Length Metric: 35
Overall Length ...
|
| TREND C070EX1/2TC STAFF BEAD/NOSING 12.7MM RAD |
Product Code: C070EX1/2TC These staff bead are ideal for producing nosings and attractive edges. Edge cut only.
Dimensions:
D=43 mm
C=40 mm
OL=3 5/64 inch
OL=78 mm
R=12.7 mm
Shank Dia.=1/2 inch
Shank Diameter: 1/2
Diameter Metric: 42.9
Cut Length Metric: 40
Overall Le...
|
| TREND C070X1/4TC STAFF BEAD 5.2MM RAD X 19.1MM CUT |
Product Code: C070X1/4TC These staff bead are ideal for producing nosings and attractive edges. Edge cut only.
Dimensions:
D=20 mm
C=3/4 inch
C=19.1 mm
OL=2 1/4 inch
OL=59 mm
R=5.2 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 25/32
Diameter Metric...
|
| TREND C071X1/4TC SASH BAR 6.3MM RAD X 19.1MM CUT |
Product Code: C071X1/4TC Ovolo cutter designed for sash bars but useful for decorative edging.
Dimensions:
D=3/4 inch
D=19.1 mm
C=1/2 inch
C=12.7 mm
R=6.3 mm
OL=53 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 3/4
Diameter Metric: 19.1
Cut Length Imp...
|
|
|
Basket 0 items - £0.00
