|
|
Trend |
| TREND TR37X1/2TC TWO FLUTE 12MM DIA X 63MM X115MM OL |
Product Code: TR37X1/2TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR37X12MMTC STRAIGHT 12MM DIA X 63MM X 115MM OL |
Product Code: TR37X12MMTC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR38X8MMTC GUIDED 3 DEG UNDERCUT 38MM CUT |
Product Code: TR38X8MMTC 3 degree undercut router bits for routing a leading edge on doors to allow a tight fit against jamb.
Shank mounted bearing self guides the cutter along door edge.
8mm shank for medium or heavy duty routers only.
Dimensions:
D=19.3 mm
C=38.1 mm
OL=...
|
| TREND TR39AX1/2TC GUIDED 2 DEG UNDERCUT 50MM CUT |
Product Code: TR39AX1/2TC 2 degree undercut router bits for routing a leading edge on doors to allow a tight fit against jamb.
Shank mounted bearing self guides the cutter along door edge.
Dimensions:
D=22.5 mm
C=50 mm
OL=100 mm
B=19 mm
A=2 degrees
Shank Diameter=1/2 inch
Id...
|
| TREND TR39X1/2TC GUIDED 3 DEG UNDERCUT 50MM CUT |
Product Code: TR39X1/2TC 3 degree undercut router bits for routing a leading edge on doors to allow a tight fit against jamb.
Shank mounted bearing self guides the cutter along door edge.
Dimensions:
D=24.3 mm
C=50 mm
OL=101 mm
B=19 mm
A=3 degrees
Shank Diameter=1/...
|
| TREND TR39X12MMTC GUIDED 3 DEG UNDERCUT 50MM CUT |
Product Code: TR39X12MMTC 3 degree undercut router bits for routing a leading edge on doors to allow a tight fit against jamb.
Shank mounted bearing self guides the cutter along door edge.
Dimensions:
D=24.3 mm
C=50 mm
OL=101 mm
B=19 mm
A=3 degrees
Shank Diameter=12 mm
Sh...
|
| TREND TR40DX1/2TC TWO FLUTE 15MM DIA X 25MM CUT |
Product Code: TR40DX1/2TC Trend Trade Straight Cutter - 15mm diameter
15mm diameter x 25mm cut length for heavy duty slotting grooving and rebating with templates, side fences or in a router table using a 1/2in shank router.
Centre tip design for drilling and stopped cut appl...
|
| TREND TR40DX1/4TC TWO FLUTE 15MM DIA X 25MM CUT |
Product Code: TR40DX1/4TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR41X1/2TC INTUMESCENT CUTTER SET 10MM X 40MM |
Product Code: TR41X1/2TC For 4.0mm thick strip. For 10.0mm wide intumescent strip.
Dimensions:
D=40 mm
C=10 mm
B=32 mm
E=4 mm
Shank Diameter=1/2 inch
OL=62 mm
Fire check=30 minutes
Shank Diameter: 1/2
Diameter Metric: 40
Cut Length Metric: 10
Overall Length Metric: 62
...
|
| TREND TR42X1/2TC INTUMESCENT CUTTER SET 15MM X 40MM |
Product Code: TR42X1/2TC For 4.0mm thick strip. For 15.0mm wide intumescent strip.
Dimensions:
D=40 mm
C=15 mm
B=32 mm
E=4 mm
OL=68 mm
Shank Diameter=1/2 inch
Fire check=30 minutes
Shank Diameter: 1/2
Diameter Metric: 40
Cut Length Metric: 15
Overall Length Metric: 68
...
|
| TREND TR44DX1/2TC TWO FLUTE 14MM DIA X 70MM CUT |
Product Code: TR44DX1/2TC Extra long two flute cutter for routing hollow honey-comb work top boards only.
Use only in professional routers with an 80mm deep plunge and suitable one piece multi-slit collet to ensure safe cutter retraction into the router base.
TC tips are conv...
|
| TREND TR45DX1/2TC TWO FLUTE 19.1MM DIA X 51MM CUT C/T |
Product Code: TR45DX1/2TC Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTF...
|
| TREND TR46X1/2TC INTUMESCENT RECESSER 20MM CUTX40MM |
Product Code: TR46X1/2TC For 4.0mm thick strip. For 20.0mm wide intumescent strip.
Dimensions:
D=40 mm
C=20 mm
B=32 mm
E=4 mm
OL=73 mm
Shank Diameter=1/2 inch
Fire check=60 minutes
Shank Diameter: 1/2
Diameter Metric: 40
Cut Length Metric: 20
Overall Length Metric: 73
...
|
| TREND TR47X1/2TC GUIDED ROMAN OGEE 4MMRAD X 15.9 CUT |
Product Code: TR47X1/2TC Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTFE coated, indicated by distinctive black colouring.
Can be used on hardwood & softwood, fibreboard, plywood and particle board.
Etched...
|
| TREND TRENDIWAX LUBRICANT WAX STICK |
Product Code: NDIWAX Extends sawblade life by keeping blade cool at cutting points.
For use when sawing aluminium.
Use at regular intervals.
Apply directly onto the teeth of a stationary blade.
Trendiwax is a low melting point solid lubricant for direct application...
|
| TREND TSQ T SQUARE T/SQ |
Product Code: TSQ Made from solid laminate provides an instant means of squaring off, marking out, setting up jigs etc.
Blade guiding edge bevelled for ease of use.
Tapered blade.
Dimensions:
Overall length=703 mm
Blade length=645 mm
Blade thickness=3 mm
Blade width ...
|
| TREND UNI/CS UNIVERSAL COUNTERSINK |
Product Code: UNI/CS This TCT countersink clamps onto any drill between 3.0mm and 7.2mm in diameter.
Recommended for wood and man-made boards
By reversing the countersink on the drill, it can be used as a non-cutting depth stop.
Ensure flutes of drill are aligned w...
|
| TREND UNI/GB16 UNIBASE GUIDE BUSH 16MM OD |
Product Code: UNI/GB16 Replacement 16mm plastic line-up guide bush for the UNIBASE.
Dimensions:
Outside diameter=16 mm
Plate diameter=60 mm
Csk screw hole centres=50 mm
Diameter Metric: 16
Diameter 2 Metric: 60
Cut Length Metric: 6...
|
| TREND VARIJIG VARIJIG SYSTEM ADJUSTABLE FRAME 700 |
Product Code: VARIJIG Adjustable frame and guide for use with a router.
Adjustable frame for rectangles and squares.
Allows a router to cut recesses, slots, face panel moulds etc. Can also be used to create panel doors for kitchens etc.
Four lengths of 700mm extrusion wi...
|
| TREND VJS/AG/36 VARIJIG VARIABLE ANGLE GUIDE 36 |
Product Code: VJS/AG/36 Variable angle guide for the router or saw.
Adjustable angle guide to allow grooving with the router, or crosscutting with a circular saw.
Adjustable angle range from 25 degree to 155 degree.
Preset angle for 30, 45, 60, 90, 120, 135 and 150 degree.
...
|
| TREND VJS/CG/24 VARIJIG CLAMP GUIDE 24 INCH |
Product Code: VJS/CG/24 For accurate guiding of router, saws and jigsaws.
Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten.
Ideal for holding and clamping work pieces.
Aluminium extrusion incorporating T-slots.
The clamps are fit...
|
| TREND VJS/CG/36 VARIJIG CLAMP GUIDE 36 INCH |
Product Code: VJS/CG/36 For accurate guiding of router, saws and jigsaws.
Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten.
Ideal for holding and clamping work pieces.
Aluminium extrusion incorporating T-slots.
The clamps are fit...
|
| TREND VJS/CG/50 VARIJIG CLAMP GUIDE 50 INCH |
Product Code: VJS/CG/50 For accurate guiding of router, saws and jigsaws.
Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten.
Ideal for holding and clamping work pieces.
Aluminium extrusion incorporating T-slots.
The clamps are fit...
|
| TREND VJS/CG/BBC VJS/CG BACK TO BACK CLIPS (8PCS) |
Product Code: VJS/CG/BBC Varijig clamp guide back to back clips.
Clips comprise of alloy brackets and knobs.
Allows two Varijig clamp guides to be joined back to back.
Clamp one clamp guide to the bench and use the clips to attach another clamp guide upside down.
Raises comp...
|
|
|
Basket 0 items - £0.00
