Trend

Torx key....

Replacement dome screw for Ref. RT/331 and RT/391. Dimensions: Head type=dome Thread=M3 Thread length=4 mm Driver type=slot Diameter Metric: M3...

Replacement dome screw. Dimensions: Head type=dome Thread=M4 Thread length=10 mm Driver type=socket Diameter Metric: M4...

A large rigid router table insert plate for incorporation into user-made router tables. Thermoset phenolic. Two concentric snap-in rings. Three hole sizes of 98mm, 68mm & 32mm dia. Concentric rings and radial lines on underside for easy centri...

A large 1 metre long bladed T-square for use with a router. Blade has two parallel edges to allow a router to run on both edges. Allows a router to rout an edge square. The butt has two M5 tapped holes for fitting of a false fence. Ideal for groovi...

Solid Carbide for long life. Ideal for engraving and veining work. Dimensions: D=5 mm C=15 mm C2=16 mm A=82.5 degrees Shank Diameter=1/4 inch OL=64mm Shank Diameter: 1/4 Diameter Metric: 5 Cut Length Metric: 15 Bearing Diameter Metric: 64 Ang...

Cuts cleanly without feather edging. Solid Carbide for long life. Cuts to a fine' V' groove point. Ideal for sign writing. Dimensions: D=14.5 mm C=12.5 mm C2=14 mm A=60 degrees OL=57 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Met...

Cuts cleanly without feather edging. Solid Carbide for long life. Cuts to a fine ' V' groove point. Ideal for sign writing. Dimensions: D=14.5 mm C=12.5 mm C2=14 mm A=60 degrees OL=57 mm Shank Diameter=8 mm Shank Diameter: 8 mm Diameter Metri...

Cutter is turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions. Offers better plunge cutting characteristics than TCT. Many more re-sharpenings can be obtained fro...

Cutter is turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions. Offers better plunge cutting characteristics than TCT. Many more re-sharpenings can be obtained fro...

Cutter is turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions. Offers better plunge cutting characteristics than TCT. Many more re-sharpenings can be obtained fro...

Solid Tungsten Carbide economy cutter. Self-guiding 90 degree trimming only with Dimensions: D=1/4 inch D=6.3 mm C=5 mm C2=4.5 mm OL=38 mm A=83 degrees A2=90 degrees Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperial: 1/4 Diameter M...

Trend 6.3mm diameter Solid Tungsten Carbide Trimming Cutter - 1/4in shank, 10mm cut depth. Economy cutter made from Ultra-durable Solid Tungsten Carbide construction for increased performance and strength. Self guided designed nose the run against th...

Solid Tungsten Carbide economy cutter. Self-guiding 90 degree trimming only. The guide length is 3mm. Ref. S48/39 is a shorter version of Ref. S48/40. Dimensions: D=1/4 inch D=6.3 mm C=10 mm OL=52 mm A=90 degrees Shank Diameter=1/4 inch Shank ...

Solid Tungsten Carbide economy cutter. Self guiding at 83 degrees with Ref. S48/41. The guide length is 3mm. Dimensions: D=1/4 inch D=6.3 mm C=6 mm OL=38 mm A=83 degrees Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperial: 1/4 Dia...

Solid Tungsten Carbide economy cutter. Self-guiding 90 degree trimming only with This is for trimming on a rebate. The guide length is 3mm. Dimensions: D=1/4 inch D=6.3 mm C=6 mm OL=35 mm A=90 degrees Shank Diameter=1/4 inch Shank Diameter: ...

Solid Carbide rasp/burr. Coarse cut. For grinding, carving and shaping of glass reinforced plastics (GRP). Not suitable for plunge cutting. Use at speed 10000 -30000 RPM. Dimensions: D=1/4 inch D=6.3 mm C=20 mm OL=51 mm Shank Diameter=1/4 inch Shan...

Solid Carbide rasp/burr. Fne cut. For grinding, carving and shaping of glass reinforced plastics (GRP). For plunge cutting. Use at speed 10000 -30000 RPM. Dimensions: D=1/4 inch D=6.3 mm C=20 mm OL=51 mm Shank Diameter=1/4 inch Shank Diameter: 1/4...

Tooling for metal, glass reinforced plastic (GRP). plastic and wood. Carving, weld removal and drilling hole enlarging. Solid carbide head. For removing welds and burrs in metal, also hand engraving and sculpting wood and metal. Dimensions: D=6 ...

Tooling for metal, glass reinforced plastic (GRP). plastic and wood. Carving, weld removal and drilling hole enlarging. Solid carbide head. For removing welds and burrs in metal, also hand engraving and sculpting wood and metal. Dimensions: D=3 ...

Tooling for metal, glass reinforced plastic (GRP). plastic and wood. Carving, weld removal and drilling hole enlarging. Solid carbide head. For removing welds and burrs in metal, also hand engraving and sculpting wood and metal. Dimensions: D=6 ...

Tooling for metal, glass reinforced plastic (GRP). plastic and wood. Carving, weld removal and drilling hole enlarging. Solid carbide head. For removing welds and burrs in metal, also hand engraving and sculpting wood and metal. Dimensions: D=3 ...

Solid carbide spiral roughing tool to rout composite materials including phenolics, carbon fibre, fibreglass and Trespa. Unique grinding and multi-flute design. Suitable for roughing cuts in hard and abrasive material. Roughing cuts are for bulk remo...

Tooling for metal, glass reinforced plastic (GRP). plastic and wood. Carving, weld removal and drilling hole enlarging. Solid carbide head. For removing welds and burrs in metal, also hand engraving and sculpting wood and metal. Dimensions: D=16...

Tooling for metal, glass reinforced plastic (GRP). plastic and wood. Carving, weld removal and drilling hole enlarging. Solid carbide head. For removing welds and burrs in metal, also hand engraving and sculpting wood and metal. Dimensions: D=10...

Down-cut spirals are ideal for routing small workpieces or for holding workpieces secure in vacuum jigs. Down-cut pushes woodchips below the work. Two flute. Dimensions: D=1/8 inch D=3.2 mm C=1/2 inch C=12.7 mm OL=50.8 mm Shank Diameter=1/4 inch ...