Trend

These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners. When using bearing Ref. B95A make two passes when a full depth of cut is required. Dimensions: D=31.8 mm C=15.9 mm B=9.5 mm B2=12.7 mm E=9.5...

These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners. When using bearing Ref. B95A make two passes when a full depth of cut is required. Dimensions: D=31.8 mm C=15.9 mm B=9.5 mm B=12.7 mm E=9.5 ...

TCT cutter with staggered cutting surfaces. Deep mortising and grooving giving good chip clearance. For lock mortising, two width cuts will be needed to achieve the standard 19mm mortise. Will plunge and clear chips to a depth of 70mm in a number of...

Trend Craft Pro 1/2in shank bearing guided flush trimming cutter - 12.7mm diameter Two Flute Carbide tips. 50mm cutting depth for replicating thicker components with templates; ideal for heavier joinery and furniture work. Bottom bearing guide for fo...

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Dimensions: D=1/2 inch D=12.7 mm C=38 mm B=12.7 mm A=90 degrees OL=92 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Imperial: 1/2 Diameter Metric: 1...

Trend Craft Pro 1/2in shank bearing guided chamfer cutter - 51mm diameter Two Flute Carbide tips. 1/2in shank with 19.1mm cutting depth for heavy duty work, architectural joinery and general chamfering work. 45¡ bearing guided chamfer profile follows...

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be pro...

Trend Craft Pro 1/2in shank double bearing guided trimmer cutter - 12.7mm diameter Two Flute Carbide tips. Top and bottom bearings allows the work to be fed with bottom or top template to prevent tear out on short grain for a premium finish. 50mm cut...

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Dimensions: D=12 mm D=15/32 inch C=50 mm C=2 inch OL...

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Dimensions: D=12 mm D=15/32 inch C=50 mm C=2 inches ...

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Dimensions: D=12 mm D=15/32 inch C=50 mm C=2 inch OL...

Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Dimensions: D=35 mm C=14 mm B=35 mm R=5.2 mm OL=65 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Imperial: 1 3/8 D...

Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Dimensions: D=35 mm C=14.3 mm B=35.0 mm R=6.3 mm R2=10.3 mm OL=65 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Imp...

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe. Cuts both parts of the joint b...

Trend Craft Pro 1/4in shank bearing guided trimmer cutter - 12.7mm diameter Triple Flute Carbide tips. Triple flute carbide TCT tips ensure the cleanest of finishes on timber, plastic laminates and veneers. 25mm cutting depth, ideal for replicating ...

Recessing cutter will accommodate the Schlegel Aquamac 63 or Exitex Aquatex P6 weather strip system and allows for a particularly small gap between sash and frame. The slot can be positioned part way down the side of the rebate, or at the bottom of ...

Trend Craft Pro 1/2in shank Aquamac cutter - 46.3mm diameter Two Flute Carbide tips. Speeds up the fitting of specialist weather seals Schlegel Aquamac 21 or Exitex Aquatex A10 seal. Cuts the correct sized groove and recess in a single pass for incr...

Trend Craft Pro 1/2in shank Intumescent strip cutter - 10mm width Two Flute Carbide tips. Cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. Bearing guide ensures the correct depth an...

Trend Craft Pro 1/4in shank Intumescent strip cutter - 10mm width Two Flute Carbide tips. Cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. Bearing guide ensures the correct 4mm depth ...

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. For use with smaller routers where application allows. Neatly cuts grooves on doors or frames to ...

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. Neatly cuts grooves on doors or frames to accept a weatherseal. Dimensions: D=36 mm C=2 mm OL=80...

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. For use with smaller routers where application allows. Neatly cuts grooves on doors or frames to ...

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. Neatly cuts grooves on doors or frames to accept a weatherseal. Dimensions: D=36 mm C=2.5 mm OL=...

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. For use with smaller routers where application allows. Neatly cuts grooves on doors or frames to ...

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. Neatly cuts grooves on doors or frames to accept a weatherseal. Dimensions: D=36 mm C=2.8 mm OL=...

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. For use with smaller routers where application allows. Neatly cuts grooves on doors or frames to ...