Trend

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always che...

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always che...

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always che...

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always che...

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always che...

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always che...

Can be used with a majority of routers on the market. The bar fits into one of the holes for the router side fence. They have a pivot point which is adjustable in height. Dimensions: Size=8 mm x 500 mm Trend T5, T4 Dewalt DW613, DW615 Elu MOF96 ...

Can be used with a majority of routers on the market. The bar fits into one of the the holes for the router side fence. They have a pivot point which is adjustable in height. Dimensions: Size=10 mm x 500 mm Smallest dia. with T10 & 12.7 mm cutte...

The point attaches to one of the router fixed rods. The pivot point is adjustable in height and this trammel can be used on most 8mm rods. For 8 mm diameter fence rods. Dimensions: To suit rod diameter=8 mm Trend T5 Dewalt DW613, DW615 Elu MOF96...

Plastic sleeved for Corian cutters. Refs. BNT/2 & BNT/5 are tapered. Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cau...

Plastic sleeved for Corian cutters. Refs. BNT/2 & BNT/5 are tapered. Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cau...

Plastic sleeved for Corian cutters. Refs. BNT/2 & BNT/5 are tapered. Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cau...

Plastic sleeved for Corian cutters. Refs. BNT/2 & BNT/5 are tapered. Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cau...

Plastic sleeved for Corian cutters. Refs. BNT/2 & BNT/5 are tapered. Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cau...

Complete Routing by Alan Holtham New Revised Edition. An essential read for the amateur or the experienced router user. Revised edition includes four new step by step projects for all abilities. Full of easy to read routing techniques and step by st...

A variety of alloy bearing rings to give various rebate sizes. Rings are secured between the two bearings on the large rebater Ref. 46/390. Dimensions: D=5/8 inch D=15.9 mm E=17.45 mm Bore=12.7 mm Diameter Imperial: 5/8 Diameter Metric: 15.9...

A variety of alloy bearing rings to give various rebate sizes. Rings are secured between the two bearings on the large rebater Ref. 46/390. Dimensions: D=19.1 mm E=15.9 mm Bore=12.7 mm Diameter Imperial: 3/4 Diameter Metric: 19.1...

A variety of alloy bearing rings to give various rebate sizes. Rings are secured between the two bearings on the large rebater Ref. 46/390. Dimensions: D=20.6 mm E=15.1 mm Bore=12.7 mm Diameter Imperial: 13/16 Diameter Metric: 20.6...

A variety of alloy bearing rings to give various rebate sizes. Rings are secured between the two bearings on the large rebater Ref. 46/390. Dimensions: D=22.2 mm E=14.3 mm Bore=12.7 mm Diameter Imperial: 7/8 Diameter Metric: 22.2...

A variety of alloy bearing rings to give various rebate sizes. Rings are secured between the two bearings on the large rebater Ref. 46/390. Dimensions: D=1 inch D=25.4 mm E=12.7 mm Bore=12.7 mm Diameter Imperial: 1 Diameter Metric: 25.4...

A variety of alloy bearing rings to give various rebate sizes. Rings are secured between the two bearings on the large rebater Ref. 46/390. Dimensions: D=31.7 mm E=9.5 mm Bore=12.7 mm Diameter Imperial: 1 1/4 Diameter Metric: 31.7...

A variety of alloy bearing rings to give various rebate sizes. Rings are secured between the two bearings on the large rebater Ref. 46/390. Dimensions: D=38.1 mm E=6.35 mm Bore=12.7 mm Diameter Imperial: 1 1/2 Diameter Metric: 38.1...

A variety of alloy bearing rings to give various rebate sizes. Rings are secured between the two bearings on the large rebater Ref. 46/390. Dimensions: D=41.3 mm E=4.75 mm Bore=12.7 mm Diameter Imperial: 1 5/8 Diameter Metric: 41.3...

A variety of alloy bearing rings to give various rebate sizes. Rings are secured between the two bearings on the large rebater Ref. 46/390. Dimensions: D=44.4 mm E=3.2 mm Bore=12.7 mm Diameter Imperial: 1 3/4 Diameter Metric: 44.4...

Ideal for general purpose trimming & mortising, and for use with Trend Worktop Jigs for cutting worktop joints, bolt recesses and sink/hob apertures in laminated chipboard and solid timber. Tungsten Carbide Tipped 1.5mm micro-granular tips for long c...

For routing Belfast /Butler sinks. Made from 12mm hardwearing CNC machined Compact Grade High Pressure Laminate. Will also allow drip channel groove to be routed on the underside of the worktop. Corner radius of 25mm. Maximum distance 630mm or 1030mm...