Trend

Popular rebate sets which include different size bearings for a choice of rebates. Ease of setting-up and accurate depth of cut. Ideal for rebating straight and shaped work pieces. Ideal with delicate applications such as musical instrument productio...

Popular rebate sets which include different size bearings for a choice of rebates. Ease of setting-up and accurate depth of cut. Ideal for rebating straight and shaped work pieces. Ideal with delicate applications such as musical instrument product...

Four fluted TCT trimmer/profiler. Super fine finish. Ball bearings fitted to both nose and shank. Allows templates to be placed either on top or the bottom of the material, for ease of routing. Allows for irregular grained timber to be profiled m...

Two bearings are supplied for an optional lower quirk. Larger bearing removes the quirk. Dimensions: D=30 mm C=13 mm B=12.7 mm B2=16 mm R=5 mm OL=52 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 30 Cut Length Metr...

Two fluted for clean finish, nose bearing to rout a rebate, and shank bearing to profile edge flush. Ideal to remove damaged trim on tops to allow new trim to be added. Tungsten carbide tipped for abrasive materials and is ideal for use on timber and...

Ideal for producing nosings and attractive edges. Dimensions: D=35.2 mm C=35 mm B=16 mm R=9.5 mm OL=83 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Metric: 35.2 Cut Length Metric: 35 Overall Length Metric: 83 Bearing Diameter Metric...

Ideal for producing nosings and attractive edges. Dimensions: D=44.8 mm C=41 mm B=19 mm R=12.7 mm OL=91 mm Shank Diameter=1/2 inch For stationary machines at max. recommended speed 18,000 RPM Shank Diameter: 1/2 Diameter Metric: 44.8 Cut Length ...

Self-guiding cutter with facility to change profile by fitting larger bearing & varying the depth. Supplied with two bearings. The larger bearing removes the bottom quirk. Dimensions: D=1 5/8 inches D=41.3 mm C=17.5 mm B=9.5 mm B2=12.7 mm R=6.3 m...

Self-guiding cutter with facility to change profile by fitting larger bearing & varying the depth. Supplied with two bearings. The larger bearing removes the bottom quirk. Dimensions: D=57 mm C=25.5 mm B=9.5 mm B2=12.7 mm R=9.5 mm OL=75 mm Shank ...

Supplied with two bearings. The larger bearing removes the bottom quirk. Dimensions: D=63 mm C=20 mm B=9.5 mm B2=12.7 mm R=9.5 mm R2=9.5 mm OL=79 mm Shank Diameter=1/2 inch For stationary machines at max. recommended speed 18,000 RPM Shank Diamet...

Cut a wider edge line, at an angle of 60 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges. Dimensions: D=29 mm C=13 mm A=60 degrees B=16 mm OL=55 mm Shank Diameter=1/4 inch Shank Diam...

Cut a wider edge line, at an angle of 45 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges. Dimensions: D=27 mm C=9 mm A=45 degrees OL=51.5 mm Shank Diameter=1/4 inch Shank Diameter: 1...

Gives a smooth bevel finish for laminates and other materials. Bearing follows the board beneath. Dimensions: D1=5/8 inches D1=15.9 mm C=1/4 inches C=6.3 mm OL=53 mm B=1/2 inches B=12.7 mm A=75 degrees Shank Diameter=1/4 Shank Diameter: 1/4 Diame...

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Dimensions: D=28 mm C=19 mm B=12.7 mm R=10 mm OL=61 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 28 Cut Length Metric...

Trimming top and bottom surfaces simultaneously with bearing following the board. Two fluted. Increased productivity. Dimensions: D=18 mm C=15 mm C2=9 mm A=90 degrees OL=65 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 18 Cu...

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Dimensions: D=27 mm C=17 mm C2=13 mm B=9.5 mm R=17 mm OL=65.6 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Metric: 27 Cut Le...

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Dimensions: D=27 mm C=17 mm B=9.5 mm R=17 mm OL=56.1 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 27 Cut Length Metri...

Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc. Dimensions: D=1/2 inch D=12.7 mm C=25.4 mm B=12.7 mm A=90 degrees OL=66 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Di...

Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc. Has twin bearings for stability by increasing the bearing surface and is an industrial profiling tool for longer runs of wor...

Two flute. For trimming of laminate and solid lipping. 1.6mm deep 'V' groove to hide glue line. Dimensions: D=16 mm D2=12.7 mm C=1 inch C=25.4 mm B=12.7 mm OL=67 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 16 Diameter 2 Me...

For window boards 25mm thick. Two passes create shallow nosing. Dimensions: D=15/16 inch D=23.7 mm C=3/4 inch C=19.0 mm OL=50.1 mm B=12.7 mm R=42 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 23.7 Cut Length Metric: 19 Overal...

For window boards 25mm thick. Two passes create shallow nosing. Dimensions: D=30 mm C=16 mm B=12.7 mm R=16 mm OL=62.8 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 30 Cut Length Metric: 16 Overall Length Metric: 62.8 Bearing...

Trend Professional 1/4in shank bearing guided trimming cutter - 9.5mm diameter for laminate and template work 9.5mm diameter X 6.35mm cutting depth bearing guided trimmer for flush trimming of laminate and veneer work. Extra long shank allows the cut...

Trend Professional 1/4in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 9.5mm diameter X 12.7mm cutting depth bearing guided trimmer for flush trimming of laminate and veneer work. Double shank mounted bearings ...

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before...

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before...