Trend

Trend Snappy Magnetic Screwdriver Bit Holder - With sliding barrel Rubberised sliding barrel helps retain the screws onto the bit; ideal for use with slotted screw driver bits Sliding barrel design slides over the screw to hold it in place; perfect f...

A larger size Trend Snappy Magnetic Bit Holder for 25mm insert bits with retractable barrel. For use with screw sizes up to No 12. Internal diameter 12mm. Dimensions: Overall length=120 mm Internal dia.=12 mm Shank Diameter=1/4 inch hex Shank Dia...

Trend Snappy Nut Driver - 10mm Metric Nut Size The ideal accessory for assembling frames with nuts and bolts using a battery driver. For 10mm Metric head nuts and bolts. Magnetic fixing retention for hands free positioning. High quality single piece ...

Trend Snappy Nut Driver - 13mm Metric Nut Size The ideal accessory for assembling frames with nuts and bolts using a battery driver. For 13mm Metric head nuts and bolts. Magnetic fixing retention for hands free positioning. High quality single piece ...

A high quality magnetic nut driver. Ideal for bolts. Suitable for use with sheet metal screws and landscaping screws and sleeper fasteners. Dimensions: OL=65 mm Shank Diameter=1/4 inch hex A/F=5/16 inch A/F=7.9 mm Shank Diameter: 1/4 hex ...

A high quality magnetic nut driver. Ideal for bolts. Dimensions: OL=65 mm Shank Diameter=1/4 inch hex A/F=7 mm To suit hex bolt thread size=M4 Shank Diameter: 1/4 hex Diameter Metric: 7 Overall Length Metric: 65...

Trend Snappy Nut Driver - 8mm Metric Nut Size The ideal accessory for assembling frames with nuts and bolts using a battery driver. For 8mm Metric head nuts and bolts. Magnetic fixing retention for hands free positioning. High quality single piece co...

Use drill next to walls. Drill and fixes in tight spaces. Outer sleeve rotates allowing secure positioning. Shaft swivels to 15 degree angle. Accepts both insert bits and direct drive bits. Dimensions: Shank Diameter=1/4 inch hex Shank Diam...

Trend Snappy Tubular Plug Cutter - 10mm Diameter Made from Tool Steel for durable performance in hard and softwoods. Cuts parallel, clean, smooth and consistent 10mm diameter plugs for plugging matching diameter screw holes in matching or contrasting...

Trend Snappy Standard Plug Cutter - 12.7mm Diameter Made from Tool Steel for durable performance in hard and softwoods. Fast cutting four prong design. Plugs easily snap out using a screwdriver. Cuts tapered plugs that tighten as they are driven for ...

...

Trend Snappy Tubular Plug Cutter - 12mm Diameter Made from Tool Steel for durable performance in hard and softwoods. Cuts parallel, clean, smooth and consistent 12mm diameter plugs for plugging matching diameter screw holes in matching or contrasting...

Trend Snappy Standard Plug Cutter - 9.5mm (3/8in) Diameter Made from Tool Steel for durable performance in hard and softwoods. Compatible with Trend Snappy countersink and counterbores Ref.SNAP/CS/4, SNAP/CS/6, SNAP/CS/8, SNAP/CS/10, SNAP/CS/10H, SNA...

Made from Tool Steel. Plugs are very slightly tapered. Recommended for use with a pillar drill. Use on timber to make plugs/pellets to plug screw holes Dimensions: Shank Diameter=1/4 inch hex Plug size=5/8 inch Plug size=15.9 mm Taper range approx....

...

This set incorporates two drill countersinks and matching plug cutters. Plugs cutters are made from Tool Steel and are very slightly tapered. Use on timber to drill a countersunk hole for a screw which is then plugged uses a plug/pellet made using th...

Extra long Phillips screwdriver bits For use with Trend Snappy Quick Chuck. Dimensions: OL=150 mm Size=Phillips No.2 Shank Diameter=1/4 inch hex Shank Diameter: 1/4 hex Overall Length Metric: 150...

High grade tool steel bits, hardened for ultimate wear resistance. The bits have 1/4 inch hex shanks to fit the Quick Chuck. Dimensions: OL=50 mm Size=Phillips No.3 Shank Diameter=1/4 inch hex Shank Diameter: 1/4 hex Overall Length Metric: 50...

Extra long Phillips screwdriver bits For use with Trend Snappy Quick Chuck. Dimensions: OL=150 mm Size=Phillips No.3 Shank Diameter=1/4 inch hex Shank Diameter: 1/4 hex Overall Length Metric: 150...

A 9.5mm (3/8 inch) diameter stepped High Speed Steel drill for use with Pocket Hole Jigs. Supplied with depth setting collar. Can be fitted to the Quick Chuck or directly into the drill chuck. Dimensions: D=3/8 inch D=9.5 mm Shank Diameter=1/4 inc...

High grade tool steel bits, hardened for ultimate wear resistance. The bits have 1/4 inch hex shanks to fit the Quick Chuck. Dimensions: Overall length=50 mm Size=Pozi No.2 Shank Diameter=1/4 inch hex Shank Diameter: 1/4 hex Overall Length Metric:...

High grade tool steel bits. Round torsion body for increased life. Ideal for use in high grade screws and in impact drivers. The bits have 1/4 inch hex shanks to fit the Quick Chuck. Dimensions: Shank Diameter=1/4 inch hex Shank Diamete...

Trend Snappy Extra Long Screwdriver Bit - No2 Pozi Extended length bit for driving and removing screws in deep recesses or inaccessible areas. 150mm long overall length ideal for fixing and adjusting kitchen cabinets. Pozi No2 compatible with most po...

High grade tool steel bits, hardened for ultimate wear resistance. The bits have 1/4 inch hex shanks to fit the Quick Chuck. No. 4 Pozi screwdriver bits are ideal for No. 10 window anchors and frame fixers. Dimensions: OL=50 mm Size=Pozi No.4 Shank...

Trend Snappy Quick Chuck - With 3/8in hex Shank The heart of the Trend Snappy System, the chuck takes all of the Snappy accessories for quick swapping between tasks and applications. Fits into a standard 3 jaw drill/driver chuck to convert it to a ...

Step drill with hardened cutting edges for Confirmat furniture construction screws. Used to stepped drill hole for Confirmat style screws for carcass assembly where a right angled joint is required. Supplied with HSS slow spiral drill. Dimensions: ...