Trend

Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters. Dimensions: D=26 mm C=14.3 mm R=5/16 inch R=8 mm P=9 mm OL=51.4 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 26 Cut Length Metric: 14...

Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters. Dimensions: D=29.0 mm C=15.8 mm P=9 mm R=3/8 inch R=9.5 mm OL=52.9 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 29 Cut Length Metric:...

Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters. Dimensions: D=34.4 mm C=19 mm P=9 mm R=1/2 inch R=12.7 mm OL=56.1 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 34.4 Cut Length Metric...

Cutters with guide bearing reduce setting up time for curved workpieces. Dimensions: D=20.7 mm B=12.7 mm R=4 mm OL=47 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 20.7 Overall Length Metric: 47 Bearing Diameter Metric: 12.7...

Cutters with guide bearing reduce setting up time for curved workpieces. Dimensions: D=24.7 mm B=12.7 mm R=6 mm OL=51 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 24.7 Overall Length Metric: 51 Bearing Diameter Metric: 12.7...

For creating a concave radius or cove in the edge of furniture and columns. Dimensions: D=3/4 inch D=19.1 mm C=6.4 mm B=12.7 mm OL=61.0 mm R=3.2 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperial: 3/4 Diameter Metric: 19.1 Cut Leng...

For creating a concave radius or cove in the edge of furniture and columns. Dimensions: D=57/64 inch D=22.7 mm C=25/64 inch C=10 mm B=12.7 mm OL=61 mm R=5 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Imperial: 57/64 Diameter Metric: 22...

Gives a narrow appearance to a board edge. Dimensions: D=22 mm C=10 mm R=3 mm OL=39 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 22 Cut Length Metric: 10 Overall Length Metric: 39...

This quarter radius can produce a sunk bead or a nosing mould. Requires a side fence for guidance. Dimensions: D=25 mm C=20 mm R=13 mm OL=58.5 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Metric: 25 Cut Length Metric: 20 Overall Leng...

The long cut depth of these cutters allows them to produce under-cut finger grooves. Dimensions: D=25 mm C=32 mm R=12.5 mm OL=70 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Metric: 25 Cut Length Metric: 32 Overall Length Metric: 70...

An initial cut with a straight cutter is required to produce the drawer pull profile. Dimensions: D=44.8 mm D2=24 mm C=25.4 mm R=8 mm R2=2 mm OL=64 mm Shank Diameter=1/2 inch For stationary machines at max. recommended speed 18,000 RPM Shank Diamet...

An initial cut with a straight cutter is required to produce the drawer pull profile. Dimensions: D=45 mm D2=24 mm C=17 mm R=4 mm R2=2 mm OL=60 mm Shank Diameter=1/2 inch For stationary machines at max. recommended speed 18,000 RPM Shank Diameter: ...

An initial cut with a straight cutter is required to produce the drawer pull profile. Dimensions: D=19 mm C=13 mm R=4 mm OL=48 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 19 Cut Length Metric: 13 Overall Length Metric: 48...

An initial cut with a straight cutter is required to produce the drawer pull profile. Dimensions: D=38 mm D2=22 mm C=17 mm R=6 mm OL=61 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Metric: 38 Diameter 2 Metric: 22 Cut Length Metric: 1...

Use in two passes from left & right to cut a protruding grip handle. Dimensions: D=22 mm C=17 mm R=1.5 mm R2=2 mm OL=60 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Metric: 22 Cut Length Metric: 17 Overall Length Metric: 60...

A bearing guided reversible finger jointer, to increase the gluing area for edge to edge joints. Dimensions: D=24.6 mm C=18.5 mm OL=58 mm B=12.7 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 24.6 Cut Length Metric: 18.5 Overall...

Finger Jointer combines an assembley of five TCT slotting cutters with an abutting-edge cutter to produce a profile that extends the glue line threefold, resulting in an extremely strong joint. The Finger Jointer fits into any portable or stationar...

A large version of a classic moulding for glazing bars, also popular for table and dresser top edge finishes. Dimensions: D=36 mm D2=16 mm C=33 mm R=20 mm OL=71.1 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Metric: 36 Cut Length Metri...

The guide pin follows the work edge to give a preset width of rebate. Ref. 8D/4 can be used to create a counterbore for a slot to accept M5 and M6 pan head screws. Dimensions: C=14 mm P=4.8 mm E=9.5 mm OL=52 mm Shank Diameter=1/4 inch S...

Ideal for producing nosings and attractive edge moulds. Beads Ref. 9/10 has a matching cutter Ref. 8/10 for jointing & hinging. Dimensions: D=19 mm C=6 mm C2=22 mm R=3 mm OL=54 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 19 C...

Ideal for producing nosings and attractive edge moulds. Beads Ref. 9/11 has a matching cutter Ref. 8/11 for jointing & hinging. Dimensions: D=24 mm C=10 mm C2=28 mm R=5 mm OL=60 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 24 ...

Ideal for producing nosings and attractive edge moulds. Dimensions: D=60.2 mm C=38 mm C2=50.8 mm R=19 mm OL=98 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Metric: 60.2 Cut Length Metric: 38 Overall Length Metric: 98...

Ideal for producing nosings and attractive edge moulds. Dimensions: D=25 mm C=12 mm C2=26 mm R=6 mm OL=66.5 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Metric: 25 Cut Length Metric: 12 Overall Length Metric: 66.5...

Ideal for producing nosings and attractive edge moulds. Dimensions: D=25 mm C=12 mm C2=26 mm R=6 mm OL=57.5 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Diameter Metric: 25 Cut Length Metric: 12 Overall Length Metric: 57.5...

Ideal for producing nosings and attractive edge moulds. Dimensions: D=42.9 mm C=25.4 mm C2=40 mm R=12.7 mm OL=78 mm Shank Diameter=1/2 inch For stationary machines at max. recommended speed 18,000 RPM Shank Diameter: 1/2 Diameter Metric: 42.9 Cut...

Creates a corner bead with a step. By making a second pass at 90 degrees a full corner bead can be cut. Two flutes give a clean finish to cut edges. Dimensions: D=23 mm D2=20 mm B=16 mm R=2 mm OL=50 mm Shank Diameter=1/4 inch Shank Diameter: 1/4...