Trend

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before...

Trend Professional 1/4in shank bearing guided trimming cutter - 15mm diameter for laminate and template work 15mm diameter X 25mm cutting depth bearing guided profiling cutter, perfect for templating and trimming work in timber, laminate and wood bas...

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before...

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before...

Trend Professional 1/4in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 12.7mm diameter X 12.7mm cutting depth bearing guided profiling cutter, perfect for templating and trimming work in timber, laminate and wo...

Trend Professional 1/4in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 12.7mm diameter X 9.5mm cutting depth bearing guided profiling cutter, perfect for templating and trimming work in timber, laminate and woo...

Trend Professional 1/4in shank bearing guided trimming cutter - 15.9mm diameter for laminate and template work 15.9mm diameter X 19.1mm cutting depth bearing guided profiling cutter, perfect for templating and trimming work in timber, laminate and wo...

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair tre...

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair tre...

Trend Professional 1/2in shank bearing guided trimming cutter - 19.1mm diameter for laminate and template work 19.1mm diameter X 25.4mm cutting depth bearing guided profiling cutter, perfect for templating and trimming work in timber, laminate and wo...

Trend Professional 1/4in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 12.7mm diameter X 25.4mm cutting depth bearing guided profiling cutter, perfect for templating and trimming work in timber, laminate and wo...

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before...

Trend Professional 1/4in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 12.7mm diameter X 32mm cutting depth bearing guided profiling cutter, perfect for templating and trimming work in timber, laminate and wood...

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair tre...

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair tre...

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair tre...

For trimming the lipping of plastic overlay, and for rebating and machining wood, Duralium and plastics. Tungsten Carbide Tipped. Use at speed 12000 - 24000 RPM. Dimensions: D=18 mm C=12 mm A=90 degrees OL=45 mm Shank Diameter=1/4 inch Shank Diam...

Trend Professional 1/2in shank bearing guided pierce and trim cutter - 12.7mm diameter for laminate work 12.7mm diameter X 30mm cutting length pierce and trim cutter for flush cutting apertures in worktops cleanly. 1/2in shank cutter perfect for heav...

Trend Professional 1/4in shank bearing guided pierce and trim cutter - 6.3mm diameter for laminate work 6.3mm diameter X 18mm cutting length pierce and trim cutter for flush cutting laminated apertures cleanly. 1/4in shank and 18mm cutting range; ide...

Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Specially designed for the caravan building industry, used for cutting apertures in windows, doors & the floor pan...

For trimming top & lip. Economical cutters, perform 3 functions: 1. To top trim the overlay at 90 degrees. 2. To trim the overlay at 45 degrees or 60 degrees. 3. The base of the cutter can trim the vertical lipping at 90 degrees. Requires side fenc...

These countersinks are produced in High Speed Steel (HSS) and should not be confused with carbon steel types. They are designed for countersinking mild steel, iron and plastics. Multi flute design. Ground shank for greater running accuracy. Dimens...

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. Dimensions: D=1/2 inch D=12.7 mm C=19 mm OL=51 mm Sh...

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. Dimensions: D=3/4 inch D=19.1 mm C=19 mm OL=51 mm Sh...

TCT cutter with staggered cutting surfaces. Deep mortising and grooving giving good chip clearance. For lock mortising, two width cuts will be needed to achieve the standard 19mm mortise. Dimensions: D=1/2 inch D=12.7 mm C=50 mm OL=108 mm Shank D...

Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. ...