|
|
Trend |
| TREND 3/0X1/2TC TWO FLUTE 4.7MM DIA X 11MM CUT |
Product Code: 3/0X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=3/16 inch
D=4.7 mm
C=11 mm
OL=56 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Imper...
|
| TREND 3/0X1/4TC TWO FLUTE 4.7MM DIA X 11MM CUT |
Product Code: 3/0X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=3/16 inch
D=4.7 mm
C=11 mm
OL=51 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imper...
|
| TREND 3/10X1/2TC TWO FLUTE 3.2MM DIA X 11MM CUT |
Product Code: 3/10X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=1/8 inch
D=3.2 mm
C=11 mm
OL=56 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Imperi...
|
| TREND 3/10X1/4TC TWO FLUTE 3.2MM DIA X 11MM CUT |
Product Code: 3/10X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=1/8 inch
D=3.2 mm
C=11 mm
OL=59 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperi...
|
| TREND 3/11X1/4TC TWO FLUTE 3.4MM DIA X 11MM CUT |
Product Code: 3/11X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=3.4 mm
C=11 mm
OL=51 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 3.4
Cut ...
|
| TREND 3/12X1/4TC TWO FLUTE 6.3MM DIA X 11MM 257018 |
Product Code: 3/12X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=1/4 inch
D=6.3 mm
C=11 mm
OL=44 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperi...
|
| TREND 3/13X1/4TC TWO FLUTE 5.5MM DIA X 19MM |
Product Code: 3/13X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=7/32 inch
D=5.5 mm
C=19 mm
OL=51 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imper...
|
| TREND 3/1X1/2TC TWO FLUTE 5MM DIA X 16MM |
Product Code: 3/1X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=13/64 inch
D=5 mm
C=16 mm
OL=64.5 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Impe...
|
| TREND 3/1X1/4TC TWO FLUTE 5MM DIA X 16MM 257016 |
Product Code: 3/1X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=13/64 inch
D=5 mm
C=16 mm
OL=69 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperi...
|
| TREND 3/20LX1/4TC POCKET 6.3MM DIA X 19MM CUT |
Product Code: 3/20LX1/4TC A two flute cutters with extra long shanks.
Deep grooving, rebating and mortising.
Useful for template work when thickness of template restricts depth.
Extra care must be taken to avoid breakage.
Take more passes than usual, and only cut up to...
|
| TREND 3/20X1/2TC TWO FLUTE 6.3MM DIA X 16MM CUT |
Product Code: 3/20X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=1/4 inch
D=6.3 mm
C=16 mm
OL=69 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter...
|
| TREND 3/20X1/4TC TWO FLUTE 6.3MM DIA X 16MM 257019 |
Product Code: 3/20X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=1/4 inch
D=6.3 mm
C=16 mm
OL=59 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperi...
|
| TREND 3/21X1/4HSS TWO FLUTE 6.3 DIA X28MM 253306 |
Product Code: 3/21X1/4HSS These are made from a single piece of High Speed Steel, ground with a very fine edge.
They are only suitable for non abrasive materials, but will give a superior finish in soft timbers.
Generally HSS cutters are slightly less expensive than their...
|
| TREND 3/22X1/2TC TWO FLUTE 6.3MM DIA X 25MM CUT |
Product Code: 3/22X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=1/4 inch
D=6.3 mm
C=25 mm
OL=70 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Imperi...
|
| TREND 3/22X1/4TC TWO FLUTE 6.3MM DIA X 25MM 257021 |
Product Code: 3/22X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=1/4 inch
D=6.3 mm
C=25 mm
OL=69 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperi...
|
| TREND 3/23X1/4TC TWO FLUTE 6.5MM DIA X 25MM CUT |
Product Code: 3/23X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=6.5 mm
C=25 mm
OL=57 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 6.5
Cut ...
|
| TREND 3/24X1/2TC TWO FLUTE 6MM DIA X 25MM CUT |
Product Code: 3/24X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D1=6 mm
Cut length=25 mm
OL=65 mm
Shank Diameter=1/2
Shank Diameter: 1/2
Diameter Metric: 6
Cut...
|
| TREND 3/24X1/4TC TWO FLUTE 6MM DIA X 25MM CUT |
Product Code: 3/24X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D1=6 mm
Cut length=25 mm
OL=57 mm
Shank Diameter=1/4
Shank Diameter: 1/4
Diameter Metric: 6
Cut...
|
| TREND 3/2X1/2TC TWO FLUTE 6MM DIA X 16MM CUT |
Product Code: 3/2X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=15/64 inch
D=6 mm
C=16 mm
OL=69 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Imperi...
|
| TREND 3/2X1/4TC TWO FLUTE 6MM DIA X 16MM 253335 |
Product Code: 3/2X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=15/64 inch
D=6 mm
C=16 mm
OL=59 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperi...
|
| TREND 3/30X1/4TC TWO FLUTE 7.5MM DIA X 19MM |
Product Code: 3/30X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=19/64 inch
D=7.5 mm
C=19 mm
OL=51 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Impe...
|
| TREND 3/31X1/2TC TWO FLUTE 7MM DIA X 25MM |
Product Code: 3/31X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=9/32 inch
D=7 mm
C=25 mm
OL=63 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Imperia...
|
| TREND 3/3X1/2TC TWO FLUTE 7MM DIA X 19MM |
Product Code: 3/3X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=9/32 inch
D=7 mm
C=19 mm
OL=63 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Imperia...
|
| TREND 3/3X1/4TC TWO FLUTE 7MM DIA X 19MM 257023 |
Product Code: 3/3X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=9/32 inch
D=7 mm
C=19 mm
OL=50 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperia...
|
| TREND 3/41X1/2TC TWO FLUTE 8MM DIA X 25MM CUT |
Product Code: 3/41X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=5/16 inch
D=8 mm
C=25 mm
OL=69 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Imperia...
|
| TREND 3/41X1/4TC TWO FLUTE 8MM DIA X 25MM CUT |
Product Code: 3/41X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=5/16 inch
D=8 mm
C=25 mm
OL=57 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperia...
|
|
|
Basket 0 items - £0.00
