|
|
Trend |
| TREND C045BX1/2TC CHAMFER V GROOVE 45 DEG 38MM DIA |
Product Code: C045BX1/2TC For veining, panelling, 'V' grooving, bevelling & chamfering.
Dimensions:
D=1 1/2 inch
D=38 mm
C=27 mm
C2=19 mm
C3=27 mm
A=45 degrees
Shank Diameter=1/2 inch
OL=64 mm
Shank Diameter: 1/2
Diameter Imperial: 1 1/2
Diameter Metric: 38
Cut Length M...
|
| TREND C045X1/4TC CHAM V GROOV A=45 DEG X 25.4MM DIA |
Product Code: C045X1/4TC For veining, panelling, 'V' grooving, bevelling & chamfering.
Dimensions:
D=1 inch
D=25.4 mm
C=7/16 inch
C=20 mm
C2=11 mm
C3=18 mm
A=45 degrees
OL=60 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 1
Diameter Metric: 25.4
Cut L...
|
| TREND C047AX1/4TC COMBI TRIMMER A=60 12MM DIA |
Product Code: C047AX1/4TC For trimming top & lip.
1/4" shank 60¡ combination trimmer for 90¡ edge trimming and 60¡ bevel cuts.
Ideal for trimming laminates and veneers flush with a square edge or chamfer detail.
Can be used as a moulding cutter for unique edge design d...
|
| TREND C047X1/4TC CHAMFER A= 60 DEG X 25.4MM DIA |
Product Code: C047X1/4TC Two flute cutters for producing extra clean cut bevelled edges.
No plunge cut.
Dimensions:
D=1 inch
D=25.4 mm
C=25/64 inch
C=10 mm
A=60 degrees
OL=50 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 1
Diameter Metric: 25.4
Cut...
|
| TREND C048X1/4TC CHAMFER A= 45 DEG X 34.9MM DIA |
Product Code: C048X1/4TC Two flute cutters for producing extra clean cut bevelled edges.
No plunge cut.
Dimensions:
D=1 3/8 inch
D=34.9 mm
C=25/64 inch
C=10 mm
A=45 degrees
OL=50 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperial: 1 3/8
Diameter Metric: 3...
|
| TREND C049AX1/4TC PIN GUIDED CHAMF/BEVEL 45 DEG |
Product Code: C049AX1/4TC Ideal for fast chamfering.
Popular in the sign making trades.
For chamfering edges of plastic material .
Dimensions:
D=25.5 mm
C=10 mm
P=5.5 mm
A=45 degrees
Shank Diameter=1/4
OL=60 mm
Shank Diameter: 1/4
Diameter Metric: 25
Cut Length Metric...
|
| TREND C049X1/2TC S/GUIDED CHAM A=45 DEG X 12.7MM CUT |
Product Code: C049X1/2TC Self-guiding chamfer/bevel cutter.
Bearing follows the board beneath.
Dimensions:
D=32 mm
C=1/2 inch
C=12.7 mm
B=9.5 mm
A=45 degrees
OL=60 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Metric: 32
Cut Length Imperial: 1/2
Cut Length Met...
|
| TREND C049X8MMTC S/GUIDED CHAM A=45 DEG X 12.7MM CUT |
Product Code: C049X8MMTC Self-guiding chamfer/bevel cutter.
Bearing follows the board beneath.
Dimensions:
D=32 mm
C=1/2 inch
C=12.7 mm
B=9.5 mm
A=45 degrees
OL=62 mm
Shank Diameter=8 mm
Shank Diameter: 8 mm
Diameter Metric: 32
Cut Length Imperial: 1/2
Cut Length Metric...
|
| TREND C050X1/4TC RADIUS 1.6MM RAD X 3.2MM DIA |
Product Code: C050X1/4TC These are ideal for engraving and decorative panel work.
Made with Solid Tungsten Carbide inserts, with two flutes.
Dimensions:
D=1/8 inch
D=3.2 mm
C=3/8 inch
C=9.5 mm
R=1.6 mm
OL=61.5 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Impe...
|
| TREND C050X8MMTC RADIUS 1.6MM RAD X 3.2MM DIA |
Product Code: C050X8MMTC These are ideal for engraving and decorative panel work.
Made with Solid Tungsten Carbide inserts, with two flutes.
Dimensions:
D=1/8 inch
D=3.2 mm
C=3/8 inch
C=9.5 mm
R=1.6 mm
OL=59 mm
Shank Diameter=8 mm
Shank Diameter: 8 mm
Diameter Imperial:...
|
| TREND C051AX1/2TC RADIUS CUTTER R2.5MM RAD WATER DRIP |
Product Code: C051AX1/2TC These are ideal for engraving and decorative panel work.
Made with Solid Tungsten Carbide inserts, with two flutes.
Dimensions:
D1=5 mm
C=13 mm
OL=66 mm
R1=2.5 mm
Shank Diameter=1/2
Shank Diameter: 1/2
Diameter Metric: 5
Cut Length Imperial: 1/...
|
| TREND C051X1/4TC RADIUS 2.4MM RAD X 4.8MM DIA |
Product Code: C051X1/4TC These are ideal for engraving and decorative panel work.
Made with Solid Tungsten Carbide inserts, with two flutes.
Dimensions:
D=3/16 inch
D=4.8 mm
C=1/2 inch
C=12.7 mm
R=2.4 mm
OL=66 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Impe...
|
| TREND C052AX1/4TC RADIUS CUTTER 3MM RAD |
Product Code: C052AX1/4TC These are ideal for engraving and decorative panel work.
Made with Solid Tungsten Carbide inserts, with two flutes.
Dimensions:
D=6 mm
C=15 mm
R=3 mm
Shank Diameter=1/4 inch
OL=59 mm
Shank Diameter: 1/4
Diameter Metric: 6
Cut Length Metric: 15
...
|
| TREND C052X1/4TC RADIUS 3.2MM RAD X 6.3MM DIA |
Product Code: C052X1/4TC These are ideal for engraving and decorative panel work.
Made with Solid Tungsten Carbide inserts, with two flutes.
Dimensions:
D=1/4 inch
D=6.3 mm
C=1/2 inch
C=12.7 mm
OL=65 mm
R=3.2 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imper...
|
| TREND C052X8MMTC RADIUS 3.2MM RAD X 6.3MM DIA |
Product Code: C052X8MMTC These are ideal for engraving and decorative panel work.
Made with Solid Tungsten Carbide inserts, with two flutes.
Dimensions:
D=1/4 inch
D=6.3 mm
C=1/2 inch
C=12.7 mm
R=3.2 mm
OL=64.5 mm
Shank Diameter=8 mm
Shank Diameter: 8 mm
Diameter Imperi...
|
| TREND C053AX1/4TC RADIUS 5.0MM RAD X 18MM CUT |
Product Code: C053AX1/4TC These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.
For deep channels, take a series of passes.
Dimensions:
D=25/64 inch
D=10 mm
C=45/64 inch
C=18 mm
R=5 mm
OL=58 mm
Shank Diameter=1/4 i...
|
| TREND C053CX1/2TC RADIUS 6.0M RAD X 19MM CUT X 86MM |
Product Code: C053CX1/2TC
Tungsten Carbide Tipped 2.0mm micro-granular tips for extra-long cutter life.
Highly Ground Tip Face polished to 800-grit ensures accurate cutting, with a fine finish.
PTFE non-Stick Coating reduces friction, minimises resin build up and extends the...
|
| TREND C053X1/4TC RADIUS 4.8MM RAD X 9.5MM DIA |
Product Code: C053X1/4TC These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.
For deep channels, take a series of passes.
Dimensions:
D=3/8 inch
D=9.5 mm
C=1/4 inch
C=6.3 mm
R=4.8 mm
OL=46.5 mm
Shank Diameter=1/4 i...
|
| TREND C054AX1/2TC RADIUS 6.35M RAD X 19MM CUT X 86MM |
Product Code: C054AX1/2TC These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.
For deep channels, take a series of passes.
Dimensions:
D1=1/2 inches
D1=12.7 mm
C=3/4 inches
C=19 mm
OL=86 mm
R1=6.3 mm
Shank Diamete...
|
| TREND C054X1/2TC COVE R 6.35MM X 7.9MM CUT |
Product Code: C054X1/2TC These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.
For deep channels, take a series of passes.
Dimensions:
D=1/2 inch
D=12.7 mm
C=5/16 inch
C=7.9 mm
R=6.3 mm
OL=48.5 mm
Shank Diameter=1/2...
|
| TREND C054X1/4TC RADIUS 6.3MM RAD X 12.7MM DIA |
Product Code: C054X1/4TC These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.
For deep channels, take a series of passes.
Dimensions:
D=1/2 inch
D=12.7 mm
C=5/16 inch
C=7.9 mm
R=6.3 mm
OL=48.5 mm
Shank Diameter=1/4...
|
| TREND C054X8MMTC RADIUS 6.3MM RAD X 12.7MM DIA |
Product Code: C054X8MMTC These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.
For deep channels, take a series of passes.
Dimensions:
D=1/2 inch
D=12.7 mm
C=5/16 inch
C=7.9 mm
R=6.3 mm
OL=48.5 mm
Shank Diameter=8 m...
|
| TREND C055X1/4TC RADIUS 7.9MM RAD X 15.9MM DIA |
Product Code: C055X1/4TC These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.
For deep channels, take a series of passes.
Dimensions:
D=5/8 inch
D=15.9 mm
C=3/8 inch
C=9.5 mm
R=7.9 mm
OL=50 mm
Shank Diameter=1/4 in...
|
| TREND C056AX1/2TC RADIUS 9.5MM RAD X 32MM CUT X 80MM |
Product Code: C056AX1/2TC
Tungsetn Carbide Tipped 2.0mm micro-granular tips for extra-long cutter life.
Highly Ground Tip Face polished to 800-grit ensures accurate cutting, with a fine finish.
PTFE non-Stick Coating reduces friction, minimises resin build up and extends the...
|
| TREND C056X1/2TC RADIUS 9.5MM RAD X 19.1MM DIA |
Product Code: C056X1/2TC These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.
For deep channels, take a series of passes.
Dimensions:
D=3/4 inch
D=19.1 mm
C=1/2 inch
C=12.7 mm
R=9.5 mm
OL=51 mm
Shank Diameter=1/2 i...
|
|
|
Basket 0 items - £0.00
