Trend

Tenon slide plate for use with the Scribe-Master Pro. Plate is locked in position on jig and allows through housing, half lap (halving) and tongue & groove lining joints etc. to be routed. Use with a 30mm guide bush and suitable straight cutter. Maxi...

Replacement cutter for use with the Scribe-Master Pro. For softwood and MDF. Two flute down-cut spiral for clean finish. Made from Super High Speed Steel that allows flute to be ground to a very fine cutting edge. Dimensions: D=4 mm C=40 mm OL=100 m...

Accessory cutter for use with the Scribe-Master Pro. For hardwood. Two flute down cut spiral for clean finish. Made from Super High Speed Steel that allows flute to be ground to a very fine cutting edge. Dimensions: D=4 mm C=40 mm OL=100 mm Shank Di...

Made from Carbon steel and precision machined. Auger has a spiral point, single flute. Ideal for quick, clean deep holes. Must only be used with torque control drills to prevent wrist injury. Dimensions: D=10 mm OL=155 mm Shank Diameter=1/4 inch h...

Made from Carbon steel and precision machined. Auger has a spiral point, single flute. Ideal for quick, clean deep holes. Must only be used with torque control drills to prevent wrist injury. Dimensions: D=13 mm OL=155 mm Shank Diameter=1/4 inch h...

90 degree angled screwdriver attachment allows access to tight corners. Quick change chuck ensure tool is held securely. Use with bit holders, direct drive or insert screwdriver bits, hex drills and drill/countersinks. Two position handle for maxi...

Trend Snappy 279mm/11inch Magnetic Bit Holder - for access to deep recesses. Simple bit holder for all standard 25mm long screwdriver bits. High powered magnet retains the bit and helps keep the screw in place for positioning and easier driving. E...

Trend Snappy 58mm Magnetic Bit Holder - general purpose 25mm bit holder Simple bit holder for all standard 25mm long screwdriver bits. Short overall length allows battery drivers to get into narrow spots making it ideal for work such as securing narr...

Trend Snappy152mm/6in Magnetic Bit Holder - extra length 25mm bit holder Simple bit holder for all standard 25mm long screwdriver bits. The ideal basic bit holder for general all purpose day-to-day work. High powered magnet retains the bit and helps ...

Magnetic holder for use in quick tool change drills. Two piece design for use with high torque applications. Heavy duty body to withstand impact driver use. Internal circlip design to secure insert bit. Hardened shank to RC45/50 for added strengt...

Trend Snappy66mm Micro Diameter Magnetic Bit Holder - 25mm bit holder with chuck retention. Bit holder with spring loaded Micro Sleeve Chuck to retain all standard 25mm long screwdriver bits securely. Eliminates the chance of the screwdriver bit bei...

Magnetic holder for 1/4-inch hex 25mm insert bits. Micro diameter body. Small 10.8mm diameter to allow access into tighter spaces. Pull back ring to release bits, spring-loaded release of bit. Tested to 50 Nm torque. Extra strong magnet N50 (Gauss 39...

Trend Snappy 4mm x 9.5mm TCT Counterbore - to recess screws for plugging "9.5mm diameter TCT counterbore to drill precision recess to hide screws below the surface when used with matching plug cutter. Ideal for screws up to 10 gauge Imperial sizes." ...

...

Trend Snappy 4.75mm x 12.7mm TCT Counterbore - to recess screws for plugging 12/7mm diameter TCT counterbore to drill precision recess to hide screws below the surface when used with matching plug cutter. Ideal for screws up to 12 gauge Imperial si...

Trend Snappy 6.35mm x 12.7mm TCT Counterbore - to recess screws for plugging "12/7mm diameter TCT counterbore to drill precision recess to hide screws below the surface when used with matching plug cutter. Ideal for screws up to 12 gauge Imperial siz...

Counterbore with a slow spiral drill fitted. Tungsten Carbide Tipped for use in abrasive materials. Dimensions: D= 5/8 inch D=15.9 mm D2=1/4 inch D2=6.35 mm C=11 mm Shank Diameter=1/4 inch hex Shank Diameter: 1/4 hex Diameter Imperial: 1/4 Diam...

Drill depth setting collar for 6mm, 8mm and 10mm drill bits. Depth collar fits to relief of drill bit and is adjustable in position to suit dowel drilling depth. Depth collar acts as a stop. Three pack ...

...

Heat treated tool steel countersink with a HSS drill. Adjustable for different length screws and can produce a counterbored hole for woodplugs. The drill produces pilot holes only. Dimensions: D=1/2 inch D=12.7 mm D2=1/8 inch D2=3.25 mm Shank Di...

...

...

...

Trend Snappy 9.5mm diameter TCT countersink - with adjustable drill 9.5mm diameter countersink with pilot drill designed for screws up to 5mm Metric gauge. The perfect, fast swap accessory for clean, consistent finishes." TCT cutting tips for assur...

...

Trend Snappy 9.5mm diameter TCT countersink - with adjustable drill "9.5mm diameter countersink with 4mm clearance drill. The perfect, fast swap accessory for clean, consistent finishes." TCT cutting tips for assured, long life performance in all ti...