|
|
Trend |
| TREND 3/41X1/4TC TWO FLUTE 8MM DIA X 25MM CUT |
Product Code: 3/41X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=5/16 inch
D=8 mm
C=25 mm
OL=57 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperia...
|
| TREND 3/42X1/4TC TWO FLUTE 7.9MM DIA X 26MM CUT |
Product Code: 3/42X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=5/16 inch
D=7.9 mm
C=25 mm
OL=70 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imper...
|
| TREND 3/43X1/4TC TWO FLUTE 8.0MM DIA X 26MM CUT |
Product Code: 3/43X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=5/16 inch
D=8 mm
C=25 mm
OL=70 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperia...
|
| TREND 3/43X8MMTC TWO FLUTE 8.0MM DIA X 26MM CUT |
Product Code: 3/43X8MMTC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=5/16 inch
D=8 mm
C=25 mm
OL=70 mm
Shank Diameter=8 mm
Shank Diameter: 8 mm
Diameter Imperial: ...
|
| TREND 3/44X1/4TC TWO FLUTE 8.1MM DIA X 26MM CUT |
Product Code: 3/44X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=8.1 mm
C=25 mm
OL=70 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 8.1
Cut ...
|
| TREND 3/45X1/4TC TWO FLUTE 8.9MM DIA X 26MM CUT |
Product Code: 3/45X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=8.9 mm
C=25 mm
OL=70 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Metric: 8.9
Cut ...
|
| TREND 3/4X1/2TC TWO FLUTE 8MM DIA X 19MM 257041 |
Product Code: 3/4X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=5/16 inch
D=8 mm
C=19 mm
OL=65 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Imperia...
|
| TREND 3/4X1/4TC TWO FLUTE 8MM DIA X 19MM 253333 |
Product Code: 3/4X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=5/16 inch
D=8 mm
C=19 mm
OL=52 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperia...
|
| TREND 3/50X1/2TC TWO FLUTE 9.5MM DIA X 25MM CUT |
Product Code: 3/50X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=3/8 inch
D=9.5 mm
C=25 mm
OL=71 mm
Shank Diameter=1/2 inch
Shank D...
|
| TREND 3/50X1/4TC TWO FLUTE 9.5MM DIA X 25MM 253337 |
Product Code: 3/50X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=3/8 inch
D=9.5 mm
C=25 mm
OL=58 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 3/51X1/2TC TWO FLUTE 9.5MM DIA X 32MM 257042 |
Product Code: 3/51X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=3/8 inch
D=9.5 mm
C=32 mm
OL=76 mm
Shank Diameter=1/2 inch
Shank D...
|
| TREND 3/51X1/4TC TWO FLUTE 9.5MM DIA X 32MM CUT |
Product Code: 3/51X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=3/8 inch
D=9.5 mm
C=32 mm
OL=64 mm
Shank Diameter=1/4 inch
Shank D...
|
| TREND 3/52X1/2TC TWO FLUTE 9MM DIA X 25MM CUT |
Product Code: 3/52X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=9 mm
C=25 mm
OL=70.5 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Imperial: 23/64
...
|
| TREND 3/5X1/2TC TWO FLUTE 9MM X19MM CUT |
Product Code: 3/5X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=23/64 inch
D=9 mm
C=19 mm
OL=68 mm
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Imperi...
|
| TREND 3/5X1/4TC TWO FLUTE 9MM DIA X 19MM 257027 |
Product Code: 3/5X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Dimensions:
D=23/64 inch
D=9 mm
C=19 mm
OL=51 mm
Shank Diameter=1/4 inch
Shank Diameter: 1/4
Diameter Imperi...
|
| TREND 3/60X1/2TC TWO FLUTE 10MM DIA X 35MM 257044 |
Product Code: 3/60X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=25/64 inch
D=10 mm
C=35 mm
OL=81 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 3/61X1/2TC TWO FLUTE 10MM DIA X 25MM |
Product Code: 3/61X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=25/64 inch
D=10 mm
C=25 mm
OL=71 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 3/61X1/4TC TWO FLUTE 10MM DIA X 25MM |
Product Code: 3/61X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=25/64 inch
D=10 mm
C=25 mm
OL=65 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 3/62X1/2TC TWO FLUTE 10MM DIA X 30MM |
Product Code: 3/62X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=25/64 inch
D=10 mm
C=30 mm
OL=74 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 3/6X1/2TC TWO FLUTE 10MM DIA X 19MM 257043 |
Product Code: 3/6X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=25/64 inch
D=10 mm
C=19 mm
OL=65 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 3/6X1/4TC TWO FLUTE 10MM DIA X 19MM 257029 |
Product Code: 3/6X1/4TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=25/64 inch
D=10 mm
C=19 mm
OL=59 mm
Shank Diameter=1/4 inch
Shank ...
|
| TREND 3/71X1/2TC TWO FLUTE 12MM DIA X 25MM CUT |
Product Code: 3/71X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=15/32 inch
D=12 mm
C=25 mm
OL=68 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 3/72X1/2TC TWO FLUTE 12MM DIA X 38MM CUT |
Product Code: 3/72X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=15/32 inch
D=12 mm
C=38 mm
OL=80 mm
Shank Diameter=1/2 inch
Shank ...
|
| TREND 3/73DMX1/2TC TWO FLUTE 12MM DIA X 50MM CUT X84MM |
Product Code: 3/73DMX1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Short shank for Makita 3600B & 3612BR, Ryobi and Hitachi routers.
Dimensions:
D=1...
|
| TREND 3/73DX1/2TC TWO FLUTE 12MM DIA X 50MM CUT |
Product Code: 3/73DX1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=15/32 inch
D=12 mm
C=50 mm
OL=109 mm
Shank Diameter=1/2 inch
Especi...
|
| TREND 3/73X1/2TC TWO FLUTE 12MM DIA X 50MM 257045 |
Product Code: 3/73X1/2TC TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Has a TCT plunge centre tip.
Dimensions:
D=15/32 inch
D=12 mm
C=50 mm
OL=109 mm
Shank Diameter=1/2 inch
Shank...
|
|
|
Basket 0 items - £0.00
